• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
4 Results Found for Sander Viewing 1 - 4 of 4 results
RECENTLY ADDED
STANDARD LISTINGS
EMC Woody 1100 2RK Calibrating Sander with (2) Sanding Heads: Roller (Drum) and Combination Head:Full-options machine, demonstration model, used only for demos at exhibitions. Full factory warranty. Special price!Technical data: ● Useful working width 1,100 mm (43"). ● Working thickness min/max mm 3 - 190 (1/8" - 7-1/2"). ● Abrasive belt dimensions, (length) 1,900 mm (75") x (width) 1,120 mm (44"). ● Feed belt speeds adjustable by INVERTER from 2.5 to 14 m/Min (8 - 45 FPM). Head configuration: -- 1st Head: Roller Diam. 125 mm (5"), Rubber Covered Roller, 85 Shore hardness. Including On-Off Selector for roller. Roller Pressure Adjustment Control and "Grit-set System". Independent 11 kW (15 HP) Two-Speed Main Motor. Abrasive belt speed 8 + 16 m/Sec (26 + 52 FPS). . -- 2nd Head: Combination Roller & Pad. Contact Roller diameter 102 mm (4"). Rubber covered hardness 45 Shore. Roller pressure adjustment control and "Grit-Set system", electronic motorized grit compensation. Including On-Off Selector. Electronic segmented Sanding Pad type "CP" with 20 segments, each 55 mm wide (2-3/16"). Including On-Off Selector. Quick Change System: Removable pad with felt, rubber and graphite. Independent main motor 11 kW (15 HP). Electronic inverter for variable abrasive belt cutting speed 3 - 17 m/Sec (10 - 55 FPS).Electronic colour 7" Touch Screen control & display. PLC with micro-processor - CP0291. Connection for USB, RS232, Ethernet 10/100/1000. Storage capacity of 100 sanding programs. Command, programming & display of all electronic pad functions.Both heads equipped with: ● Oscillating blower for abrasive belt cleaning. ● Abrasive belt oscillation by means of electronic photocell sensor -- Feed System: ● Vacuum bed assembly for holding of small pieces. Including 2,2 kW (3 HP) fan, inverter controlled, mounted in machine frame. ● Motorized table lifting including fine adjustment, on 4 precision screws. ● Natural rubber conveyor belt, machined. ● Feed belt centering by means of conical rollers. ● Electronic digital display for working thickness; resolution 0.1 mm (0.004"). ● Idle table rollers support in infeed and outfeed. ● Blowers for panel cleaning at outfeed. ● Rubber covered presser rollers, grooved. -- Centralized Control Cabinet: ● Analog ammeter on main control cabinet. ● Table lifting-lowering thickness system electrically controlled. ● AUTOMATIC star/delta starter on abrasive belts motors. ● IP 54 protection Against dust & moisture. -- Centralized independent pneumatic control cabinet: ● Pneumatic air filter with automatic water-drain system. ● Pneumatic adjustment for "Grit set system". ● Pneumatic plant working without lubrication. ● Compressed air pressure 6 bar (85 PSI). -- Options included: ● Independent motors. ● Segmented pad with infeed reading barrier. ● 7” control unit. ● On/
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC Woody 1100 2RK Calibrating Sander with (2) Sanding Heads: Roller (Drum) and Combination Head. Complete with Lacquer Sanding Package.This is a demonstrator, only used for demos at machinery trade shows. Machine comes with full factory warranty and is not only available immediately, but has a great price tag too!Technical Data: -- Useful working width 1,100 mm (43"). -- Working thickness min/max mm 3 - 190 (1/8" - 7-1/2"). -- Abrasive belt dimensions, (length) 1,900 mm (75") x (width) 1,120 mm (44"). Head configuration:1st Head: Roller Diam. 125 mm (5"), Rubber Covered Roller, 85 Shore, Roller Pressure Adjustment Control and "Grit-set System", Driven by 11 kW (15 HP) 2-Speed motor, inverter controlled. Rotating Cutting Speeds 8 + 16 m/Sec (26 + 52 FPS). 2nd Head: Combination Roller & Pad. ● Roller diameter 102 mm (4"). Rubber covered, spirally grooved, with Shore hardness 85. Roller pressure adjustment control. Main Motor. On Off Selector control with pneumatic piston to select roller. ● Electronic segmented Fine Sanding Pad with reading bar type "CP". 20 segments, each 55 mm (2-3/16") wide. On-Off Selector and Quick Change System: Removable pad with felt, rubber and graphite. Driven by 11 kW (15 HP) motor, inverter controlled with infinitely variable cutting speed range 3 - 17 m/Sec (9 - 55 FPS). Both heads equipped with: TIMING oscillating cleaning abrasive belt blowers. Abrasive belts oscillation by means of electronic photocell sensor. Feed System: ● Including vacuum bed assembly for small & lacquered parts. Suction fan 2,2 kW (3 HP) mounted inside the machine frame. ● Feed belt speeds m/Min adjustable by INVERTER from 2.5 to 12 m/Min (8.2 - 39 FPM). ● Motorized table lifting including fine adjustment, on 4 precision screws. ● Blowers on outfeed end for panel cleaning. ● Idle table rollers support in infeed and outfeed. ● Rubber covered presser rollers, grooved. ● Natural rubber conveyor belt, machined. Feed belt centering by means of conical rollers. Electronic digital display for working thickness; resolution 0.1 mm (0.004").Machine Management System: ● Touch screen 7 inches, colour, wide type, resistant against dust & moisture. ● Memory Storage capacity for 100 working programs. ● Command, programming and display for all electronic pad functions.Centralized Control Cabinet: Analog ammeter on main control cabinet. Table lifting-lowering thickness system electrically controlled. AUTOMATIC Delta - Star starter on abrasive belts motors and IP 54 protection. Centralized independent pneumatic control cabinet: Pneumatic air filter with automatic water-drain system. Pneumatic adjustment for "Grit set system". Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI). Features: Control panel with self-diagnostics alarm control unit. On Off Selector Switch for Roller 1 and Roller 2.UL Safety Features
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC Woody 1100 2RK Calibrating Sander, (2) Sanding Heads, Roller and Combination HeadTECHNICAL DATA: -- Useful working width 1,100 mm (43"). -- Working thickness min./max. 3 - 190 mm (1/8" - 7-1/2"). -- Abrasive belt dimensions, (length) 1,900 mm (75") x (width) 1,120 mm (44"). -- Feed belt speed adjustable by INVERTER from 2.5 to 12 m/Min (8.2 - 39.3 FPM). Head configuration:1st Head: Roller Diam. 125 mm (5"), Rubber Covered Roller, 85 Shore, Roller Pressure Adjustment Control and "Grit-set System". Abrasive Belt Sanding/Cutting Speed 17 m/Sec (56 FPS). 15 kW (20 HP) Main Motor.2nd Head: Combination Roller & Pad. -- Roller diameter 102 mm (4"). Rubber covered hardness 45 Shore. Roller pressure adjustment control. 7,5 kW (10 HP) Main Motor. On-Off Selector control with pneumatic piston to select roller or not. -- PNEUMATIC Flexible Sanding Pad Including On-Off Selector: Quick Change System: Removable pad with felt, rubber and graphite. Abrasive Belt sanding/cutting speed 17 m/Sec (56 FPS). Abrasive belts oscillation by means of electronic photocell sensor. Idle table rollers support in infeed and outfeed.Work Table (Conveyor Bed): Motorized table lifting including fine adjustment, on (4) precision screws. Natural rubber conveyor belt, machined. Feed belt centering by means of conical rollers. Electronic digital display for working thickness; resolution 0.1 mm (0.004").Centralized Control Cabinet: IP 54 protection. Analog ammeter on main control cabinet. Table lifting-lowering thickness system electrically controlled. AUTOMATIC Delta - Star starter on abrasive belts motors. Centralized independent pneumatic control cabinet: IP 54 protection. Pneumatic air filter with automatic water-drain system. Pneumatic adjustment for "Grit set system". Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI). Features: Control panel with self-diagnostics alarm control unit, grooved rubber covered holddown rollers.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC Woody 1100 2RK Calibrating Sander with (2) Sanding Heads: Roller (Drum) and Combination Head:TECHNICAL DATA: -- Useful working width 1,100 mm (43"). -- Working thickness min/max mm 3 - 190 (1/8" - 7-1/2"). -- Abrasive belt dimensions, (length) 1,900 mm (75") x (width) 970 mm (38"). -- Feed belt speeds m/Min adjustable by INVERTER from 2.5 to 11 m/Min (8.2 - 36 FPM). -- 15 kW (20 HP) Main Motor Shared. Head configuration:1st Head: Roller Diam. 125 mm (5"), Rubber Covered Roller, 85 Shore, Roller Pressure Adjustment Control and "Grit-set System", Rotating Cutting Speed 17 m/Sec (56 FPS). 15 kW (20 HP) Main Motor.2nd Head: Combination Roller & Pad. -- Roller diameter 102 mm (4"). Rubber covered hardness 45 Shore. Roller pressure adjustment control. 7,5 kW (10 HP) Main Motor. On Off Selector control with pneumatic piston to select roller. -- PNEUMATIC Flexible Sanding Pad with On-Off Selector and Quick Change System: Removable pad with felt, rubber and graphite. Rotating cutting speed 17 m/Sec (55.8 FPS). Abrasive belts oscillation by means of electronic photocell sensor. Idle table rollers support in infeed and outfeed.Work Table: Motorized table lifting including fine adjustment, on 4 precision screws. Natural rubber conveyor belt, machined. Feed belt centering by means of conical rollers. Electronic digital display for working thickness; resolution 0.1 mm (0.004").Centralized Control Cabinet: Analog ammeter on main control cabinet. Table lifting-lowering thickness system electrically controlled. AUTOMATIC Delta - Star starter on abrasive belts motors and IP 54 protection. Centralized independent pneumatic control cabinet: Pneumatic air filter with automatic water-drain system. Pneumatic adjustment for "Grit set system". Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI). Features: Control panel with self-diagnostics alarm control unit. Rubber covered presser rollers, grooved. On Off Selector Switch for Roller 1 and Roller 2.Option: Tampico Cleaning Brush, 120 mm diameter. Please add ...$2,600UL Safety Features
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348