Dust Collection Systems For Sale

Dust Collection Systems 

Band Mills (Wide) (49) Band Mills (Thin Kerf) (43) Debarkers (82) Edger-Boards (58) Forklifts (57) Gang Saws (55) Hogs and Wood Grinders (233) Portable Sawmills (54) Resaws-Band (165) Scragg Mills (36) Trim Saws (80) Unscramblers (34) Wheel Loaders (74) Wood Chippers - Stationary (153)
Air Compressors (153) Airlocks (24) Banding-Strapping Machines (176) Blowers and Fans (140) Boilers (26) Bolter Saws (1) Carriages (Sawmill) (32) Carriage Drives (Sawmill) (56) Chip Bins (17) Chip Cyclones (24) Chip Screens (40) Chipping Canters (3) Chop Saws (61) Circular Saw Husks (9) Circular Sawmills (83) Conveyors (75) Conveyors Board Dealing (80) Conveyors Deck (Log Lumber) (208) Conveyors General (34) Conveyors-Auger (5) Conveyors-Live Floor (10) Conveyors-Run-Around (4) Conveyors-Vibrating (48) Conveyors Belts (201) Conveyors-Barn Sweep (24) Conveyors-Live Roll (112) Dip Tanks (5) Drills Single-Multiple (1) Drum Dryers (18) Dry Kilns (46) Dump Hoppers (10) Dust Collection Systems (278) Edger Tailing Devices (5) Edgers-Gang (41) Edgers-Slab (6) Edgers-Vertical (7) Electrical (162) Gang Rip Saws (114) GenSets (27) Hammer Mills (13) Hydraulic Power Packs (94) Knife Grinders (38) Laser Lights (7) Log Home Machinery (14) Log Merchandising Systems (13) Log Turners (Sawmill) (35) Lumber Carts (18) Lumber Sorters (7) Lumber Stackers (26) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (33) Misc (90) Operator Cabs (34) Package Saws (1) Parts and Parts Machines (8) Post and Pole Peelers (22) Power Units-Engines (17) Radial Arm Saws (30) Resaws-Circular (3) Scanning Systems (1) Scissor Lifts (52) Screening Systems (10) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (122) Shavings Baggers (1) Shavings Mills (22) Slab Saws (12) Stake Pointers (2) Step Feeders (3) Straight Line Rips (1) Tie Processings (1) Tilt Hoists (18) Wrap and Packaging (5)

Filtering

Reset All 

thru
 Used     New
Viewing Page 7 of 14
278 Results Found
Sort By 
Recently Added Items
1999 Nordfab/Dantherm NFP-2H-OP
$7,000
1999 Nordfab/Dantherm NFP-2H-OP
1997 Nordfab/Dantherm NFP-2A OPEN
$8,250
1997 Nordfab/Dantherm NFP-2A OPEN
Disa NFP-3H-OP
$9,500
Disa NFP-3H-OP
Disa NFP-3H-OP
$9,500
Disa NFP-3H-OP
$ 5,655

EXTREMA DC-275.3 TYPHOON Cyclone & Fabric Filtration Dust Collection System. -- Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter. -- (2) Fabric filter bags placed above plastic collection bags. -- Air volume output rated @ 4,850 CFM. -- 7.5 HP Induction motor. -- 14-3/4" Steel blower fan impeller and is dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bags filter dust particles down to (1) Micron in size. -- Low noise operation. -- Includes: Sturdy steel tripod cyclone mounting stand and drum dolly. (drum not included).

Bernie Straple
800-374-5009 ext:339
Call

$ 6,499

EXTREMA DC-2100 TYPHOON Cyclone & Fabric Filtration Dust Collection System.Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter.Specifications: -- (2) Fabric filter bags placed above plastic collection bags with 117 Sq. Ft. total cloth area -- 32 Cu. Ft. of storage capacity -- Rated at 6,400 CFM at 16" static pressure output. -- 10 HP Induction Motor. -- Inlet 13" with 16" Steel blower fan impeller that is dynamically balanced.Features: -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bags filter out dust particles down to (1) Micron in size. -- Low noise operation. Includes: -- Sturdy steel tripod cyclone mounting stand and drum dollie (drums not included).

Bernie Straple
800-374-5009 ext:339
Call

$ 3,425

EXTREMA DC-3050.3 TYPHOON Fabric Filtration Modular Dust Collection System. -- With 1-micron dust filtration efficency this collector will make your shop cleaner, healthier, and more productive. -- (2) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 3,075 CFM Output with single-stage blower. -- Additional filtration sections can be easily added. -- Heavy Duty 5 HP blower motor. -- 13" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy addition or removal of plastic bags. -- 1-Micron filter bags with 6 mil plastic bottom collection bags are standard. -- Options: Remote control and drum storage kit. -- Also available in Single Phase.

Bernie Straple
800-374-5009 ext:339
Call

$ 4,595

EXTREMA DC-3075.3 TYPHOON Fabric Filtration Modular Dust Collection System.With 1-micron dust filtration efficiency this collector will make your shop cleaner, healthier, and more productive. -- (3) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 4,550 CFM Output with single-stage blower. -- Additional filtration sections can be easily added. -- Heavy Duty 7.5 HP motor with push button control and motor starter, 12" inlet. -- 13.5" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy installation and removal of bags. -- Filter bags filter out dust particles down to (1) Micron in size; 6 mil thick plastic bottom collection bags are standard. -- Options: Remote control and drum storage kit.

Bernie Straple
800-374-5009 ext:339
Call

$ 5,350

EXTREMA DC-3100 TYPHOON Modular Dust Collector.Fabric filtration Dust Collection System. With 1-Micron dust filtration efficiency this collector will make your shop cleaner, healthier, and more productive. System includes: -- (3) Fabric filter top bags are mounted above individual plastic collection bags. -- Heavy Duty 10 HP motor with push button control and motor starter; 6,000 CFM output with single-stage blower; Inlet 12". -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 14" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy addition or removal of plastic bags. -- 1-Micron filter bags with 6 mil. plastic bottom collection bags are optional.Options: -- 460 V Electric; Drum kits for collection into 55-Gallon drums, and a Remote Starter. -- Additional filtration sections can be easily added.

Bernie Straple
800-374-5009 ext:339
Call

$ 7,699

EXTREMA DC-3150S TYPHOON Fabric Filtration Dust Collection System.With 1-micron dust filtration efficiency this collector will make your shop cleaner, healthier, and more productive. -- (4) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 7,500 CFM Output with single-stage blower. -- Additional filtration sections can be easily added. -- Heavy Duty 15 HP induction motor. -- 25" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy addition or removal of plastic bags. -- 1-Micron filter bags with 6 mil plastic bottom collection bags are standard. -- Wye-Delta soft start power switch. -- Options: Remote control, drum storage kit.

Bernie Straple
800-374-5009 ext:339
Call

$ 8,999

EXTREMA DC-3200S TYPHOON Fabric Filtration Modular Dust Collection System. With 1-micron dust filtration efficiency this collector will make your shop cleaner, healthier, and more productive.Specifications: -- (5) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 8,975 CFM Output with single-stage blower. -- Additional filtration sections can be easily added. -- Heavy Duty 20 HP induction motor, 16" inlet. -- 25" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy addition or removal of plastic bags. -- 1-Micron filter bags with 6 mil plastic bottom collection bags are standard. -- Wye-Delta soft start power switch. -- Options: Remote control, drum storage kit.

Bernie Straple
800-374-5009 ext:339
Call

$ 2,775

EXTREMA DB-75 TYPHOON BLOWER. Capacity 7.5 HP motor and rated at 4,700 CFM. -- Solid heavy gauge steel construction. -- Heavy duty 13.5" dia. dynamically balanced steel impeller. -- 12" Inlet, 13.5" impeller, 14" outlet. -- Rotatable collection port for use in a variety of applications. -- Safety guards on all inlets. -- Complete with magnetic starter. -- Note: 460 Volt available

Bernie Straple
800-374-5009 ext:339
Call

$ 2,560

EXTREMA DC-203.1 TYPHOON Cyclone & Fabric Filtration Dust Collection System. -- Powerful two-stage dust collection drops out heavier dust particles into a drum before passing finer particles through the fan and filter. -- (1) Fabric filter bag placed above plastic collection bag. -- 1,785 CFM Output. -- 3 HP Induction motor. -- 13" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bag filters dust particles down to (1) Micron in size. -- Low noise operation. -- Includes: Sturdy steel tripod cyclone mounting stand and drum dollies (drum not included.)

Bernie Straple
800-374-5009 ext:339
Call

$ 1,925

EXTREMA DB-50.3 TYPHOON BLOWER. Capacity 5 HP, 3,200 CFM. -- Solid heavy gauge steel construction. -- Heavy duty dynamically balanced steel impeller, 10" inlet, 13" impeller, 12" outlet. -- Rotatable collection port for use in a variety of applications. -- Safety guards on all inlets. - Complete with magnetic starter. -- Note: 460 Volt available

Bernie Straple
800-374-5009 ext:339
Call

$ 4,799

EXTREMA DC-3075.1 TYPHOON Fabric Filtration Modular Dust Collection System.With 1-micron dust filtration efficiency this collector will make your shop cleaner, healthier, and more productive. -- (3) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 4,550 CFM Output with single-stage blower. -- Additional filtration sections can be easily added. -- Heavy Duty 7.5 HP motor with push button control and motor starter. -- 13.5" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy installation and removal of bags. -- Filter bags filter out dust particles down to (1) Micron in size; 6 mil thick plastic bottom collection bags are standard. -- Options: Remote control and drum storage kit.

Bernie Straple
800-374-5009 ext:339
Call

$ 10,250

EXTREMA DC-4100 Baghouse Dust CollectorThe "DC-4100" baghouse dust collector is designed to achieve maximum airflow with a superior filtration area. This is achieved by using (36) smaller diameter filter bags to have more filter media in the same space as other similar dust collectors of its size. More filter area means better airflow with less filter maintenance. A manual bag shaker is included.The DC-4100 meets the NFPA664 CFM requirements for indoor dust collectors. The compact design allows this maximum filtration unit to use a depth of less than three and one half along a wall. The 10HP main motor has a dynamic balanced impellor and a magnetic starter is included.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 361 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (36) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 12".

Bernie Straple
800-374-5009 ext:339
Call

$ 16,999

EXTREMA DC-3525E Outdoor Baghouse Dust CollectorTyphoon's DC-3500 Series Outdoor Baghouse Dust Collectors are the newest in the line-up of high-quality dust collection solutions.With 1-micron dust filtration efficiency this collector will make your shop even more cleaner and with more shop because it's placed outdoors.Specifications: -- (8) Fabric filter top bags are mounted in (2) outdoor enclosures with 288 sq. ft. filter area and (8) 6 mil plastic collection bags with 132 cu. ft. storage area. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 10,000 CFM Output with single-stage blower. -- Heavy Duty 25 HP induction motor. -- 27" Steel blower fan impellers are dynamically balanced, 18" inlet. -- Collection bag snap-in rings for easy addition or removal of plastic bags. -- Wye-Delta soft start starter and power switch.Options: Remote control and 460V available...ask for pricing.

Bernie Straple
800-374-5009 ext:339
Call

$ 10,000

Farr Gold Series, Model GS-12 SQ, serial #399655, w/secondary collection hopper. $10,000 plus $2,000 for loading, must have step deck trailer. Frankie 757-562-3098 or 757-402-6900 [email protected] Located in Manassas, VA Sold as is where is.

 Manassas, VA
Tinder Wholesale LLC
757-402-6900
Call

$ 16,500

Farr Tenkay 20LL - approx shipping dimensions 84" x 120" x 200" tall - includes blower, gauges, roll off collection bin,electrical, filters, intake duct - 5640 square foot filter area - 3 phase - $16500 CAN - Inlet and outlet -20", - has 12 3/4" X 34" long filter with a 14" X 16" mount, - the motor is a 40 HP Estimated 10000 CFM (16LL is rated 9000 CFM) This unit was in working order when finally shutdown, only was shutdown because building was demolished Call 800-459-2148 for more info.

Showcase Equipment
260-250-4645
Call

$ 28,500

FARR GOLD GSX12 DUST COLLECTOR: 6,200 - 6,800 CFM Rated cap., 3,384 sq. ft. filter area from (12) cartridge filters, approx. 2.3:1 air: cloth ratio, w/ Rotary Air Lock . -- Equipped with: 15 HP Pull thru motor; dirty air is pulled into the filter area at bottom of filter media section allowing gross dust particles to fall into collector barrels located beneath pyramidal hopper discharging to a Rotary Air Lock.. -- Fine dust is pulled up thru the cartridge filters; dust filter cartridges are cleaned by automatic pulse jet with minimum compressed air consumption; cleaned air continues thru blower and is returned to the building air supply thru a silencer.. -- Includes: Cyclone w/ Rotary Air Lock, electrical control panel, support stand with clearance under hopper & RAL discharge for a waste bin,. On filter unit there is an access door in main fan housing. Flanged 12" x 30" inlet, and flanged 14-3/4" outlet

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

FLEX-KLEEN 43/54 PSTL 225 III Pulse Jet Dust Collector. -- General Data: 36,000 ACFM (approx.) based on 3.73 to 1 Air-to-Cloth Ratio; Square baghouse design with (225) Rigid Pleated Polyester Filter Media. approx. 9,675 sq. feet of filter area, Cartridges are 54" high and 43 sq. of filter area, each. High entry inlet designed for about 20" WG of Static Pressure. -- Filter Cleaning: Plant compressed air supplied to manifold and diaphragm valves periodically supplies pulse jets to filter bags according to a controller. -- Discharge: Small 8"x8" RAL - Rotary Air Lock (was used on paper dust). -- Construction: V-shaped collection hopper discharges into a sealed RAL. -- Overall dimensions: TBA -- Actual model: 43/54 PSTL-225, Arrangement III. -- No Fan or Cyclone are included.

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

FLOW AIRE DC-03 Cartridge Dust collectorSpecifications: -- Holds (16) cartridge filters. -- Includes New AirMax Premium Media Cartridge Filters - fire retardant. -- Total Filter Media Area: 3,616 sq. ft. -- Air-To-Media Ratio @ 8,000 cfm: 2.21:1. -- Automatic Pulse Clean System with differential pressure gauge and sequencing control in enclosure. --Single Hopper Outlet with Sealing Drum Cover Kit. -- Steel Support Structure. -- Includes: 20 HP Ground Mount Blower. -- Rated for 8,000 cfm. -- Motor Starter & Controls.Sold with a (6) month mechanical warranty

Bernie Straple
800-374-5009 ext:339
Call

$ 375

GENERAL UP0-1028 2-Bag Portable Dust CollectorSpecifications: -- Cloth filter bag size 18" Dia. x 30" L, Cloth collector bag size 18" Dia. x 30" L. -- Inlet dia. 6", Outlet size 4-1/2" x 6"Equipped with: -- (4) Swivel casters.Complete with: -- 6" - 3-1/2" Dia. Dust Hose 3-Way Fitting.

EX-FACTORY INC.
704-841-2001
Call

Call for Price

7.5 HP 220/440 volt 3-phase wired 220 volt 10” dust inlet Total filter serface 261 sq. Ft. 99.9% effective at .2-2.0 microns 3468 cfm @4.3” static pressure

Carolina Machinery Sales, Inc
704-288-1904
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved