• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
10 Results Found for Dry Kiln Viewing 1 - 10 of 10 results
PREMIUM LISTINGS
COE Wood Drying Kiln used for veneer drying. Reeves Speed Control. Converted from steam heat to gas heat elements. Parts manuals, architectural footing drawings all included. Originally owned by Broyhill in NC. Was purchased from a working facility, disassembled and transported to it's new location, BUT was never assembled. All pieces are included from the assembled site. Price is negotiable. Selling because the business folded before it could be assembled. Site location has a forklift and truck dock and can assist in loading, but seller is not responsible for rigging or transporting.
Equipment Location:Valdosta, GA
A2D Solutions, LLC
229-247-0806
STANDARD LISTINGS

Irvington-Moore Dry Kiln

Call for Price
Selling with lumber processing facility in the deep south. Irvington Moore Dry Kilns, (12) kilns in all 100 MBF, (6) in operation masonry block construction w/ Irvington Moore/USNR controls, Cutler Hammer AF 5000 & adjustable frequency AC drive,(2) natural gas fired boilers, (2) wood waste boilers (Selling as complete operation in the deep south.) Call Jackie Kittrell, 931-698-3342, for complete details, Exclusive Selling Agent "As Is Where Is"
Equipment Location:MS
Kittrell Sawmill Brokers and Appraisers
931-797-6284

Kilntec Kiln Dry Kiln

Call for Price
Machine Number: 1750 Machine Type: Dry Kiln Manufacturer: Kilntek Model #: Dry Kiln Location: South East Kilntek Lumber Dry Kiln Call For Details
Equipment Location:Blowing Rock, NC
Carolina Used Machinery
828-773-2204
NYLE L1200S Dry Kiln Heating unit -- Complete packaged dehumidification drying system ready for installation into custom-built drying chamber. -- Designed to operate effectively at low humidity levels; can bring moisture content to as low as 6%; patented "XDH" Control System is housed in a corrosion resistant, epoxy coated aluminum cabinet and operates over a wider range of temperatures with greater efficiency than any dryer available. -- The L1200S has a load capacity of (10,000 to 30,000) board feet (depending upon species and moisture content). Equipped with: -- 15 HP Compressor; a 3 HP internal blower; 48 kW of electric auxiliary heat. _ -- (4) 2 HP 30" dia. circulating fans; Fan reversing feature; (2) automatic over-temperature vents. -- Design temperature range of 70° to 160° F; removes 1250 lbs. of water per 24 hours. This unit is new and still in original crate!Now at a reduced price!
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365
2 KATRES AFK 61,000 BDFT aluminum link chambers, 45' wide X 80' long X 26' high. -- 8.5 HP Bi-directional computer controlled circulation fans. -- 2 10 HP BECKETT blowers. -- 2 NYLE Corp HT 108 dehumidification drying systems w 2-/40 HP compressors each. -- 40 BHP BOILERSMITH oil fired boiler and BOILERSMITH reciever pump. -- These are forklift loaded kilns and price includes loading for transport. Buyer responsible for freight.These units are dissassembled and in storage.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365
NYLE Steam Heated Kiln Model HT80 with the following features: -- 40 Ft. x 80 Ft. building for 100,000 and more Bd Ft. -- Front loading with multiple Doors. -- Factory Fans and Vents. -- Controls, and piping. -- Approximate year of manufacture… 2000. -- Professional rigging and loading is available. -- Boiler is wood fired
Equipment Location:NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
NYLE 30 (Similar to the newer HT42) Dehumidification Drying System:Complete packaged Dehumidification Drying System ready for installation into custom-built drying chamber. -- Designed to operate effectively at low humidity levels. -- The Model 30 has a load design capacity of 20,000 to 60,000 board feet (depending upon species and moisture content). -- Design temperature range of 80° to 160° F. Removes more than 2 tons (4,200 Lbs) of water per 24 hours.Complete with the following features: -- Nearly New CARLYLE 30 HP Compressor with latest Refrigerant specification. -- (5) 3 HP Circulation Fans. -- 7.5 HP Internal Blower. -- PARTLOW Chart Recorder, Model MRC 7000. -- Aluminum Cabinet. -- Copper Coils. -- Still in-place in good operating condition.This is a great unit with a huge capacity the same as the newer Model HT42.
Equipment Location:ATLANTIC CDN
Bill Christoffersen
800-374-5009 ext:365
NYLE 30 (Similar to the newer HT42) Dehumidification Drying System:Complete packaged Dehumidification Drying System ready for installation into custom-built drying chamber. -- Designed to operate effectively at low humidity levels. -- The Model 30 has a load design capacity of 20,000 to 60,000 board feet (depending upon species and moisture content). -- Design temperature range of 80° to 160° F. Removes more than 2 tons (4,200 Lbs) of water per 24 hours.Complete with the following features: -- CARLYLE 25 HP Compressor, Model# 06EA565300. -- (5) 3 HP Circulation Fans. -- 7.5 HP Internal Blower. -- PARTLOW Chart Recorder, Model MRC 7000. -- Aluminum Cabinet. -- Copper Coils. -- This is a great unit with a huge capacity the same as the newer Model HT42.Notes: ● Includes Model 25A Serial # 8349A ● Includes Model 25B Serial# 8349B ● Includes Model RC3 Serial # 8349 110 Volt -- Still installed and ready for Buyer to remove. Last used 4 years ago in good operating condition.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365

Unknown 4 X 9 Dry Kiln

Call for Price
4' X 9' All Steel Kiln Carts Wheel Diameter- 8" Wheel Width- 2 1/2" 72" Between Wheels. Quite a few have the Adjustable Wheels Just need to drill new holes
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Unknown Dry Kiln

Call for Price
Dry Kiln Framing for the Building Doors Included.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351