• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
14 Results Found for Drum Dryer Viewing 1 - 14 of 14 results
STANDARD LISTINGS
BARBER GREENE Portable Dryer System;With the following major components and features: -- 7 Ft. dia. x 35 Ft. Rotary Drum Dryer. -- Comes with new Flights. -- HAUCK Model "380" 80 MM BTU Burner operates on Used Oil or Diesel. -- External Trunnion Drive with Shaft-Mount Reducers. -- (2) Drive Motors per trunnion for a total of (4) Drive Motors (480 volt, 3 phase). -- Mounted on 3-Axle Carrier. -- BARBER GREENE 58,000 CFM Baghouse with Pulse Jet Cleaning. -- Also mounted on 3-Axle Carrier. -- Air Ducting.
Equipment Location:WESTERN CDN
Bill Christoffersen
800-374-5009 ext:365

Custom Built Drum Dryer

Call for Price
Furnace systems complete with fuel bin, dampers & controls Material infeed & outlet airlocks Complete ductwork systems Air recycling systems All controls & instumentation Complete system integration Complete, state of the art, drying systems that are custom manufactured for your application, location and production. Systems are designed to be fueled by green wood waste. Sized from 75-600 cubic yards per hour. Contact CMS for more information.
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904
HEIL 8' x 24' Rotary Drum Dryer with the following components and features: -- Drum Drive -- (2) Trunnion Bases with (2) Wheels each -- 8' x 24' Single-pass drum with center-fill and shell flighting. This type single-pass is actually often rated for capacity greater than a triple-pass dryer. -- The Drum and Trunions were completely Rebuilt but never put back into service.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365
HEIL 80-24 Rotary Drum Dryer System:Complete with Burner Controls and Cyclone. The System includes the following components and features: -- HEIL 8'x24' Triple-Pass Drum. -- 10-12 MM BTU WEBB Style Biomass Burner. -- Burner & System Controls. -- Main Fan. -- Blowpipe & Cyclone.This type of system is commonly capable of drying up to (4) tons per hour sawdust or up to 60 - 65 yards per hour of molder shavings.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365

Heil 80-24 Drum Dryer

Call for Price
HEIL 8-24 Drying System built around an 8' x 24' Triple-Pass Rotary Drum Dryer;Complete with the following major components and features: -- HEIL Dryer Drum. -- HEIL Trunnion Bases and Drum Drive. -- Material Input Airlock. -- Dryer System Main Fan. -- Biomass Burner with a capacity of approximately 15 MM BTUs. -- Fuel Silo (other silo is not included). -- Cyclone Collector. -- Cyclone Discharge Screw Conveyor. -- Other Conveyors. -- High Pressure Blower Relay System. -- Complete with Electrical Controls and Burner Modulation Controls. -- This system is rated to produce 3 to 4 Tons Per Hour depending upon input/output moisture content levels. The trunnions are all in good condition.NOTE: Priced to sell quickly to clear the site of the equipment.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365

1989 MEC 13X60 Drum Dryer

Call for Price
M-E-C Dryer 13’x60’ Dryer System with Dust Burner. This System is complete with the following components: -- 40 MM BTU McCONNELL Dust Burner with back-up Oil Burner. -- 13’ x 60’ M-E-C Triple-pass Rotary Dryer Drum. -- All Controls. -- Receiving Cyclone & Multi-clones. -- Main Fan with Fan Motor. -- Discharge Stack. -- All related ducting and steel structure. -- Plans, Manuals and Blueprints as available. -- Professional Rigging and Removal is available. -- Note: This is one dryer system despite where two or more may appear in different photos. -- This beautiful System was originally installed in 1989, upgraded by M-E-C in 1995, and then continued in operation from 1995 to 2003. Although the equipment is now about 25 yrs old, it has only been operated for about half that time and was always housed indoors in a supervised environment.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365
M-E-C Model 10' x 40' Triple Pass Rotary Drum Dryer complete with the following associated components: -- MEC 10 Ft. diameter x 40 Ft. long, 3-Pass, Rotary Drum. -- Trunnion Bases with Trunnion Wheels, -- Drum Drive with Motor, Sprocket and Drive Chain. -- Professional rigging & loading is available.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365

MEC 1040 Drum Dryer

Call for Price
MEC 10 x 40 Triple Pass, Gas Burner with Cyclone Complete System
Equipment Location:Crockett, TX
LPS Equipment & Acquisition Co.
731-986-4351
M-E-C 12' x 42' Triple-pass Rotary Dryer Drum with the following components: -- Triple-pass 12' x 42' Dryer Drum. -- (2) Trunnion Bases with (2) Trunnion Wheels each… (One is equipped with (2) Drum Guide Roller Idlers.) -- NOTE: No Drum Drive. -- The Dryer is to be professionally reconditioned with new flighting installed in the first pass and new insulation and new skin added.
Equipment Location:GREAT PLAINS
Bill Christoffersen
800-374-5009 ext:365
PRODUCTIZATION 10 Ft. x 42 Ft. "Quad-Pass" Rotary Drum Dryer. The components include the drum, drum drive, and trunions. -- The QuadPass patented design concept (Dryers now sold by DUPPS) seeking lower VOC emissions and brighter wood production. The minimized time in the direct heat provides a gentle initial zone while allowing for better spreading and separation of the particles for more uniform drying. Finer particles are swept away quicker from the high heat zone and therefore are dried more uniformly with reduced chance of fire as well. The final pass allows for direct discharge of the material as opposed to the exit of an ordinary three-pass dryer where much of the material must be scooped up from the bottom of the drum by the flighting and dropped into the airstream. -- The PRODUCTIZATION wedge type track mounting system was designed to allow for much easier changing of the drum tracks (drum forged steel tire) than with more common "weld-on- track" type system. Drums and tracks do not expand/contract at exactly the same rate causing a stress between the two components. The wedge system is more commonly found on dryers in heavy industrial applications such as sand drying or on rotary kilns for minerals.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365
Rotary Drum Single-Pass Dryer approximately 5 Ft. diameter x 22 Ft. long with the following main features and components: -- ECLIPSE brand 7.5 million BTUs/Hr., natural gas Burner with 7.5 HP Combustion Fan. -- 15 HP Drum Drive, 230/460 volt, 1760 RPM and Gearbox. -- Steel Fupport Frame. -- Notes: ● No dryer main fan. ● No Nameplate on the drum.
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
Used Dryer 3-Pass Rotary Drum manufactured by one of the premier makers. -- Size: 13' x 62', heavy duty. -- 10" x 3" Drum Tracks (steel drum tires) with many years of good service to go. -- This unit is in very good condition compared to many drums. The interiors are just about as nice as they come. -- Higher efficiency drying. Example: 34,000 lbs./hr. at 850° inlet temperature at 78,000 ACFM, 50% to 5% (wet basis) moisture content . -- Note: Drum only - no Trunnion Bases or Drum Drive included. However, we have a used set of trunnion bases for this size dryer we can sell separately. -- This drum is in very good condition and may be placed back into service without further work to be done. It is built to last a long time with heavy duty Shell and Inner Passes and heavy duty Trunnion Tracks.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365
(1) WESTEC 12' x 60' x 3-pass drum dryer complete with the following main features and components: -- (1) Dryer Main Fan with a 400 HP Motor. -- (1) Set of Trunion Bases, Trunion Oilers, and Drum Drives. -- (1) 60 MM BTU Dual Fuel wood dust or Gas Burners. -- NOTE: There are two dryers shown but one system has been sold.
Equipment Location:SOUTHEAST
Bill Christoffersen
800-374-5009 ext:365
Used Dryer 3-Pass Rotary Drum manufactured by one of the premier makers. -- Size: 13' x 62', heavy duty. -- 10" x 3" Drum Tracks (steel drum tires) with many years of good service to go. -- This unit is in very good condition compared to many drums. The interiors are just about as nice as they come. -- Higher efficiency drying. Example: 34,000 lbs./hr. at 850° inlet temperature at 78,000 ACFM, 50% to 5% (wet basis) moisture content . -- Note: Drum only - no Trunnion Bases or Drum Drive included. However, we have a used set of trunnion bases for this size dryer we can sell separately. -- This drum is in very good condition and may be placed back into service without further work to be done. It is built to last a long time with heavy duty Shell and Inner Passes and heavy duty Trunnion Tracks.
Equipment Location:MID ATLANTIC
Bill Christoffersen
800-374-5009 ext:365