• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
6 Results Found for Hogs and Wood Grinders Viewing 1 - 6 of 6 results
RECENTLY ADDED
STANDARD LISTINGS
36" W x 10" D grinding head Indexable cutters Feed motor on vibration tray set up Vibrating conveyor included 60HP main motor Control box 3.6 total hours - yes this is correct, hardly any use at all
Equipment Location:ME
Carolina Machinery Sales, Inc
704-288-1904
CRESSWOOD Horizontal Grinder - 2007 30 HP low rpm, horizontal grinder with power feed. Features load sensing controls and 15' vibrating infeed conveyor. Located in Florida panhandle. Visit www.benjones.com for our complete inventory.
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
CRESSWOOD EF-2440 AST Horizontal Feed Wood GrinderHorizontal feed, low RPM grinder, 5" x 24" feed opening and aggressive feed roller infeed system.Equipped with: 10" Dia. x 24" wide grinding rotor head with (42) indexable cutters; 40 HP main drive motor; rotor grinds at approx. 400 -500 RPM. -- Aggressive counter weighted feed roll system can process hard woods and soft woods - green or dry, at rates of 900-4,000 Lbs/Hr; dust collection outlet with 10" OD. -- Includes: 16' Vibratory Infeed Conveyor; 1/2" screen (good for animal bedding)
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
CRESSWOOD EF-36-60 Horizontal feed, Low RPM Grinder36" Feed opening and pinch type aggressive feed roller infeed system feeds rippings and blocks. -- Equipped with: 36" Wide x 10" dia. grinding head; indexable cutters, rotor grinds at approx. 300 -400 RPM; 60 HP main motor. 10" diameter dust collection port. -- Feed system consists of a 45' x 36" wide vibratory conveyor with 7.5 HP motor. -- Complete with NEMA 12 control box with motor controls. -- Includes: 3/4", 1" and 1-5/8" Interchangeable screens; new replacement teeth, bolts and anvil, electro-magnet for metal separation.
Equipment Location:MID ATLANTIC
Jim Reedy
800-374-5009 ext:455
CRESSWOOD EF-60-100 Horizontal Feed Wood Grinder -- Horizontal feed, low RPM grinder.Equipped with: -- 8.5" x 60" feed opening. -- 100 HP motor powering a 16" diameter rotor with indexable cutter teeth at 300 - 400 RPM.Includes: -- New Electrical control panel, powered load sensitive feed roll with replaceable grippers. -- 12' x 60" vibrating infeed conveyor. -- Capacity from 2000 to 15,000 #/hr Depending upon screen size and type of material being ground. -- 1-1/4" screen included. -- 5/8" spare screen. -- (1) Set of new knives. Note: Transformer for 600 volts operation available.
Equipment Location:EASTERN CDN
Jim Reedy
800-374-5009 ext:455
CRESSWOOD HF-36-30 Hopper-Fed Low Noise Grinder Specifications: -- 30 HP Rotor motor; 10" dia., 36" long rotor with (42) indexable knives operating at 50 - 150 RPM; 30" x 44" cutting chamber. -- Hydraulically operated pusher ram with a 36" stroke automatically advances & retracts on a continuing cycle, pushing the scrap into the low RPM grinding head. -- Pusher Ram automatically resets in case of material jams. Complete with: -- 7.5 HP Ram motor, interchangeable screen; 8" dust collector pick-up, self-contained outfeed blower.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455