• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
2 Results Found for Wrap and Packaging Viewing 1 - 2 of 2 results
STANDARD LISTINGS
COMIL STAR 200B Shrink Wrap System for Case Goods. -- Product is automatically carried to unwinding unit for top & bottom wrapping application with foil/film, welding/cutting of film after product passes through foil application station. -- The loosely wrapped product is transferred to the Tunnel for film heat shrinking; the edge pressing rollers at the outfeed of the tunnel collect the excess film, while they apply the final side/edge pressure. -- Wrapping Station: PE Shrink film infeed & middle belt conveyors with inverter driven independent geared motors, (1) upper & (1) lower motor for film unwinding & welding bar movement, welding bar driven by toothed belt. -- Working Dimensions: Welding bar length is 3,300 mm (130"), upper foil roll max. width is 2,150 mm (84-1/2"), lower foil roll max. width is 1,450 mm (57"). -- Feed belt width is 1,500 mm (59"), infeed & middle conveyor is 2,400 mm (94") long, max. working height is 450 mm (18"); working table height is 800 mm (31"); variable belt conveyor speed from 3 - 15 MPM (10-49 FPM) by inverter; free-standing control panel. -- Heat Tunnel: Welded sheet metal structure, insulated cavities for minimum heat loss; (2) heating units with armored electric resistance, centrifugal fans for uniform heat distribution. -- Teflon Coated mesh conveyor belt transport heating tunnel, gear motor driven by inverter; spring loaded edge pressing unit at outfeed end of tunnel to press overhanging film. -- Shrink tunnel length is 4,700 mm (185'), mesh conveyor is 4,700 mm (185") L x 1,800 mm (70-3/4") W x tunnel 600 mm H (24") and will accept a will accept a 450 mm (18") part height, working table height is 800 mm. (31.5") -- Variable mesh belt conveyor speed from 3 - 15 MPM (10 -49 FPM) inverter; outfeed conveyor with powered driven rollers, speed control by inverter for cooling down the items after shrink wrapping. -- Equipped with: SIRIO Welding Station; actual model is "New Star 200B". -- Total power requirement of 86 Amps, 60 Hz, 50 kW on 600 Volt, 3-Phase
Equipment Location:EASTERN CDN
Bernie Straple
800-374-5009 ext:339
COMIL STAR 200B Shrink Wrapper for Case Goods. -- Product is automatically carried to unwinding unit for top & bottom wrapping application with foil/film, welding/cutting of film after product passes through foil application station. -- The loosely wrapped product is transferred to the Tunnel for film heat shrinking; the edge pressing rollers at the outfeed of the tunnel collect the excess film, while they apply the final side/edge pressure. -- Wrapping Station: PE Shrink film infeed & middle belt conveyors with inverter driven independent geared motors, (1) upper & (1) lower motor for film unwinding & welding bar movement, welding bar driven by toothed belt. -- Working Dimensions: Welding bar length is 3,300 mm (130"), upper foil roll max. width is 2,150 mm (84-1/2"), lower foil roll max. width is 1,450 mm (57"). -- Feed belt width is 1,500 mm (59"), infeed & middle conveyor is 2,400 mm (94") long, max. working height is 450 mm (18"); working table height is 800 mm (31"); variable belt conveyor speed from 3 - 15 MPM (10-49 FPM) by inverter; free-standing control panel. -- Heat Tunnel: Welded sheet metal structure, insulated cavities for minimum heat loss; (2) heating units with armored electric resistance, centrifugal fans for uniform heat distribution. -- Teflon Coated mesh conveyor belt transport heating tunnel, gear motor driven by inverter; spring loaded edge pressing unit at outfeed end of tunnel to press overhanging film. -- Shrink tunnel length is 4,700 mm (185'), mesh conveyor is 4,700 mm (185") L x 1,800 mm (70-3/4") W x tunnel 600 mm H (24") and will accept a will accept a 450 mm (18") part height, working table height is 800 mm. (31.5") -- Variable mesh belt conveyor speed from 3 - 15 MPM (10 -49 FPM) inverter; outfeed conveyor with powered driven rollers, speed control by inverter for cooling down the items after shrink wrapping. -- Equipped with: SIRIO Welding Station; actual model is "New Star 200B". -- Total power requirement of 86 Amps, 60 Hz, 50 kW on 600 Volt, 3-Phase.
Equipment Location:EASTERN CDN
Bernie Straple
800-374-5009 ext:339