• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
40 Results Found for Clamp Carrier Viewing 1 - 20 of 40 results
STANDARD LISTINGS
CAM-WOOD CC-4108PA Clamp Carrier (8 Sections)8-Section Pneumatic Clamp Carrier with 125" width capacity.Equipped with: -- (8) Heavy Duty zinc plated clamps per section (64 clamps total). -- 40" Opening on clamps. -- Jaw sizes of clamps are 3-1/2" with inward draft. -- Pneumatic overhead panel flattener. -- Pneumatic clamp tightener and 1/2 HP electric motor rotation.Standard features: -- Large I-beam frame & legs for max. rigidity and durability. -- Heavy-duty zinc-plated clamp with huge 3/4" diameter jack bolt for super strength. -- Powerful caterpillar chain drive for clamp rotation. -- Select switch control for auto or manual mode.Includes: -- (2) Clamp tighteners with pneumatic wrench for rapid tightening and loosening of clamp. -- (2) Pneumatic panel flatteners to hold panels flat while clamps are tightened.Versatile and reliable Edge Gluing Machine for Solid Wood gluing, including laminate board, parquet, flat stock, table top, core block, truck flooring, turnings, chair seat, legs, spindle blanks, stair tread, and many others.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
CAM-WOOD CC-388PA Clamp Carrier (8 Sections)8-Section Pneumatic Clamp Carrier with 98" width capacity.Equipped with: -- (6) Heavy Duty zinc plated clamps per section (48 clamps total). -- 40" Opening on clamps. -- Jaw sizes of clamps are 3-1/2" with inward draft. -- Pneumatic overhead panel flattener. -- Pneumatic clamp tightener and 1/2 HP electric motor rotation.Standard features: -- Large I-beam frame & legs for max. rigidity and durability. -- Heavy-duty zinc-plated clamp with huge 3/4" diameter jack bolt for super strength. -- Powerful caterpillar chain drive for clamp rotation. -- Select switch control for auto or manual mode.Includes: -- Clamp tightener with pneumatic wrench for rapid tightening and loosening of clamp. -- Pneumatic panel flattener to hold panels flat while clamps are tightened.Versatile and reliable Edge Gluing Machine for Solid Wood gluing, including laminate board, parquet, flat stock, table top, core block, truck flooring, turnings, chair seat, legs, spindle blanks, stair tread, and many others.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
DOUCET 16-Section Clamp Carrier(16) Sections with 16.5' wide usable clamping width -- (16) Clamps per section (total of 256 clamps). -- 32" Opening clamps, 3-1/2" high x 4 1/2" jaw width.Complete with: -- (2) Pneumatic panel flattener. -- Heavy-Duty, 5 HP hydraulic pump for rotation drive -- (2) Hydraulic torque wrench clamp tightener;Actual model # "SRH-16-165-256-32".
Equipment Location:EASTERN CDN
Louis Sicotte
800-374-5009 ext:329
DOUCET 30-Section Clamp Carrier• (30) Sections; 8.5' wide usable clamping width -- (8) Clamps per section approx. (total of approx 234 clamps).with quick attach system -- 32" Opening clamps, 2-1/2" high x 4" jaw width. -- Complete with: Pneumatic panel flattener, Heavy-Duty, 5 HP hydraulic pump for rotation drive, hydraulic torque wrench clamp tightener;Actual model # "SRH-30.5-8.5-240-32-R-30".
Equipment Location:MID ATLANTIC
Louis Sicotte
800-374-5009 ext:329
DOUCET 30-Section Clamp Carrier• (30) Sections; 8.5' wide usable clamping width -- (6) Clamps per section (total of approx 180 clamps).with quick attach system -- 32" Opening clamps, 2-1/2" high x 4" jaw width. Complete with: -- Pneumatic panel flattener, -- 5 HP hydraulic pump for rotation drive, -- Manual clamp tightener;Actual model # "SRM-30.5-8.5-180-32-M".
Equipment Location:MIDWEST
Louis Sicotte
800-374-5009 ext:329
DOUCET 40-Section Clamp Carrier• (40) Sections; 8.5' wide usable clamping width -- (9) Clamps per section (total of approx 360 clamps).with quick attach system -- 32" Opening clamps, 3-1/2" high x 4" jaw width.Complete with: -- Pneumatic panel flattener, -- Heavy-Duty, 5 HP hydraulic pump for rotation drive, -- (2) hydraulic torque wrench clamp tightener;
Equipment Location:EASTERN CDN
Louis Sicotte
800-374-5009 ext:329
DOUCET 40 SAection Automatic Clamp Carrier -- 40-Section, 8-1/2' cap., -- (6) clamps per section, total of (240) clamps, 36" Opening, 2-1/2" high jaws. Equipped with: -- (2) Pneumatic panel flatteners, -- Hydraulic rotation -- Hydraulic clamp tightener via PLC controled automatic operator.Actual Model: SRR-40-8.5-240-36
Equipment Location:WEST COAST
Louis Sicotte
800-374-5009 ext:329
DOUCET 60-Section Clamp Carrier(60) Sections; 10.5' wide usable clamping width. -- (10) Clamps per section (total of 590 clamps).with quick attach system -- 32" Opening clamps, 3-1/2" high x 4" jaw width.Complete with: -- (2) Pneumatic panel flattener, -- Heavy-Duty, 5 HP hydraulic pump for rotation drive, -- (2) Hydraulic torque wrench clamp tightener; -- (1) Automatic Hydraulic un-tightener located on top of the clamp carrierNote: Already tear down and ready to ship
Equipment Location:EASTERN CDN
Louis Sicotte
800-374-5009 ext:329
JLT 79F-12-PC Multi Level Panel Clamp12' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (6) clamps per level (a total of 30) manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,125 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 850 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$1,790Floor space requirement: 144" x 78" x 52" high
Equipment Location:NORTHEAST
Louis Sicotte
800-374-5009 ext:329
80" x 100" Capacity Crank Wheel for adjustment Everything works This unit is no longer needed at the current facility.
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904
QUICK 20 Section Heavy Duty Pneumatic Clamp Carrier: -- Clamp Carrier: (20) Sections with 8-1/2' width cap., (6) heavy duty zinc plated clamps per section (120 clamps total), 44" opening on clamps (other lengths available). -- Clamps jaws are 3-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. -- For face gluing, Rocking Plates available as optional equipment. -- Equipped with: Panel Flattener with easy to use controls. -- Pneumatic Clamp Tightener; 3,000 RPM air wrench is 5 to 10 times faster than competitive tighteners; two-handed, trigger activated tightener is more confidence inspiring than the old ergonomically awkward "swing-style" clamp tighteners. Fast tightening and full-length clamp screws eliminate need for manual adjustment of rear clamp jaws. -- Electric Motor Rotation: Push button, automatic cycle with indexing. Automatic Rotation Cycle includes entire sequence; reverse rotation, front-rest out, forward rotation, front-rest in, and lay clamps on front rest. Perfectly! Every time! -- Complete with & Includes: Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.NOTE: 20 Section machine can produce up to (500) panels per shift!
Equipment Location:WEST COAST
Louis Sicotte
800-374-5009 ext:329
QUICK 6-Section Pneumatic Clamp Carrier with 20-1/2' width cap. & dual operator's stations, -- (15) Heavy Duty zinc plated clamps per section (90 clamps total), 38" opening on clamps. Jaw sizes of clamps are 3-1/2" high x 4-3/4" wide, with 1° inward draft. -- Equipped with DUAL OPERATOR'S STATIONS including: (2) pneumatic overhead panel flatteners, (2) pneumatic clamp tighteners and with semi-automatic rotation via electric motor drive; with separate buttons for Front Rest Out, Rotate Reverse, Rotate Forward and Front Rest In. -- Standard features: Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.
Equipment Location:WEST COAST
Louis Sicotte
800-374-5009 ext:329
QUICK 6-Section Clamp Carrier with 16-1/2' width capacity6-Section Pneumatic Clamp Carrier with 16-1/2' width cap. -- (12) Heavy Duty zinc plated clamps per section (72 clamps total); 38" opening on clamps. -- Jaw size of clamps are 3-1/2" high x 4-3/4" wide, with 1° inward draft.Equipped with: -- Pneumatic overhead panel flattener 16-1/2' wide. -- Pneumatic clamp tightener -- Semi-automatic rotation via electric motor drive; -- Separate buttons for Front Rest Out, Rotate Reverse, Rotate Forward, and Front Rest In. -- Flexible conduit for electric wires.Features & Includes: -- Automatic air line oiler; -- High quality urethane finish coating. -- Toolbox with spare parts & tools.
Equipment Location:WEST COAST
Louis Sicotte
800-374-5009 ext:329
QUICK 6-SECTION Clamp Carrier; (6) Sections, (6) clamps per section, and 8-1/2' width capacity. -- (36) Clamps total with 50" opening and 2-1/2" high x 4-3/4" wide jaws with 1° inward draft. -- 8 1/2 feet wide with easy to use controls.Equipped with: -- Pneumatic Clamp Tightener; 3,000 RPM air wrench is (5 -10) times faster than competitive tighteners; 2-handed, trigger activated tightener is more confidence inspiring than the older, ergonomically awkward "swing-style" clamp tighteners. -- Pneumatic Panel Flattener -- Electric motor drive for Carrier rotation.Complete with: -- Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler. -- Hhigh quality Urethane finish coating, and tool box with spare parts & tools. NOTE: -- 6-Section Clamp typically produces (144) high quality edge glued panels per day (3 panels per section x 6 sections x 8 hours). -- Clamp can be expanded to (14 or 20) sections at a later time. 14-Section Clamp will produce (300) panels per shift; 20-Section machine, (500) panels per shift.
Equipment Location:WEST COAST
Louis Sicotte
800-374-5009 ext:329
QUICK 6-SECTION, 10'-1/2' Wide Pneumatic "Standard" Clamp Carrier: 6-Section Clamp typically produces (144) high quality edge glued panels per day (3 panels per section x 6 sections x 8 hours). Equipped with: -- (6) Sections with (8) clamps per section and 10-1/2' width capacity. -- (48) Clamps with 38" opening and 2-1/2" high x 4-3/4" wide jaws with 1° inward draft. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. Rocker Plates available as optional equipment for face gluing. Features: -- Semi-automatic electric motor drive. -- Pneumatic Panel Flattener for 10-1/2' wide Carrier with easy to use controls. -- Pneumatic Clamp Tightener with 3,000 RPM air wrench is (5 -10) times faster than competitive tighteners; 2-handed, trigger activated tightener is more confidence inspiring than the older, ergonomically awkward "swing-style" clamp tighteners. -- Fast tightening and full-length clamp screws eliminate need for manual adjustment of rear clamp jaws. Complete with: -- Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality Urethane finish coating, and tool box with spare parts & tools. -- NOTE: Clamp Carrier can be expanded to (14) or (20) sections at a later time. 14-Section Clamp will produce (300) panels per shift; 20-Section machine, (500) panels per shift. ADD A 12" WIDE GLUE SPREADER WITH 8' INFEED AND 8' OUTFEED WITH AUTOMATIC CONVEYOR CONTROL FOR $5,800 AND GET FREE TRUCKING WHEN YOU ORDER THE SPREADER WITH THE CLAMP CARRIER!
Equipment Location:WEST COAST
Louis Sicotte
800-374-5009 ext:329
14 Section Hydraulic Clamp Carrier with 8-1/2' width capacity. -- This special "thick stock" frame accepts (8) Heavy Duty zinc plated clamps per section. -- Includes 112 clamps with 36" openings and 6" high x 4-3/4" wide jaws with 1° inward draft. -- Integral pneumatic overhead panel flattener. -- Automatic hydraulic clamp tightener with adjustable torque limiter. -- Single button automatic electric motor rotation cycle with indexing. -- The machine automatically flattens panels, tightens clamps, rotates, and loosens clamps. -- Heavy Duty frame with 3" diameter shafts and 6" I-beam legs. -- Includes: foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating and tool box with spare parts & tools. -- Call your FactoryNew sales specialist for details on all of "QUICK'S" popular clamps ranging from 30" to 52" openings. Many other base frames are available in hydraulic and pneumatic operation.
Equipment Location:WEST COAST
Louis Sicotte
800-374-5009 ext:329
QUICK 14-Section Pneumatic Clamp Carrier with 8-1/2' width capacity -- With (6) Standard zinc plated clamps per section (84 clamps total), 32" opening on clamps -- Standard Features include: -- Clamps jaws are 2-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. For face gluing, Rocking Plates available as optional equipment -- Panel Flattener with easy to use controls. -- Pneumatic Clamp Tightener; 3,000 RPM air wrench is 5 to 10 times faster than competitive tighteners; two-handed, trigger activated tightener is more confidence inspiring than the old ergonomically awkward "swing-style" clamp tighteners. Fast tightening and full-length clamp screws eliminate need for manual adjustment of rear clamp jaws. -- Electric Motor Rotation; push button, automatic cycle with indexing. Automatic Rotation Cycle includes entire sequence; reverse rotation, front-rest out, forward rotation, front-rest in, and lay clamps on front rest. Perfectly! Every time! -- Complete with: Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools. 14-Section Clamp will produce 300 panels per shift; 20-Section machine, 500 panels per shift. -- CALL JEFF FOR DELIVERY ESTIMATE
Equipment Location:WEST COAST
Louis Sicotte
800-374-5009 ext:329
QUICK 14-Section Pneumatic Clamp Carrier with 10-1/2' width capacity and Glue applicatorWith (10) Standard zinc plated clamps per section (140 clamps total), 38" opening on clamps Standard Features include: Clamps jaws are 3-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. For face gluing, Rocking Plates available as optional equipment Panel Flattener with easy to use controls.Pneumatic Clamp Tightener; 3,000 RPM air wrench is 5 to 10 times faster than competitive tighteners; two-handed, trigger activated tightener is more confidence inspiring than the old ergonomically awkward "swing-style" clamp tighteners. Fast tightening and full-length clamp screws eliminate need for manual adjustment of rear clamp jaws. Electric Motor Rotation; push button, automatic cycle with indexing. Automatic Rotation Cycle includes entire sequence; reverse rotation, front-rest out, forward rotation, front-rest in, and lay clamps on front rest. Perfectly! Every time! Complete with:Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools. 14-Section Clamp will produce 300 panels Glue applicator roller 20" wide with 8' infeed and 10' outfeed conveyor, Hold down roller over the glue roller
Equipment Location:WEST COAST
Louis Sicotte
800-374-5009 ext:329
QUICK 14-Section Pneumatic Clamp Carrier with 16-1/2' width capacity and Glue applicatorWith (15) Standard zinc plated clamps per section (210 clamps total), 38" opening on clamps Standard Features include: Clamps jaws are 3-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. For face gluing, Rocking Plates available as optional equipment (2) Panel Flattener with easy to use controls.(2) Pneumatic Clamp Tightener; 3,000 RPM air wrench is 5 to 10 times faster than competitive tighteners; two-handed, trigger activated tightener is more confidence inspiring than the old ergonomically awkward "swing-style" clamp tighteners. Fast tightening and full-length clamp screws eliminate need for manual adjustment of rear clamp jaws. Electric Motor Rotation; push button, automatic cycle with indexing. Automatic Rotation Cycle includes entire sequence; reverse rotation, front-rest out, forward rotation, front-rest in, and lay clamps on front rest. Perfectly! Every time! Complete with:Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.14-Section Clamp will produce 300 panels Glue applicator roller 20" wide with 11' infeed and 17' outfeed conveyor, Hold down roller over the glue roller
Equipment Location:WEST COAST
Louis Sicotte
800-374-5009 ext:329
QUICK 20 Section Automatic Clamp Carrier: -- Clamp Carrier: (20) Sections with 8-1/2' width cap., (6) heavy duty zinc plated clamps per section (120 clamps total), 32" opening on clamps (other lengths available). -- Clamps jaws are 3-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. -- For face gluing, Rocking Plates available as optional equipment. -- Equipped with: -- Fully Automatic Hydraulic Clamp Tightener with adjustable torque limiter, integral Pneumatic Panel Flatteners and Electric Motor Drive with fully Automatic Carrier Rotation Cycle. Two control panels maximize ease-of use. Rack and pinion carriage traverse system is solid and quietFeatures: -- The QUICK Automatic Clamp Carrier is the ideal labor-saving device for the high-production furniture or cabinet manufacturer. The Automatic Clamp Carrier cuts labor costs in half by allowing the Clamp Carrier operator to perform other tasks (such as applying glue to stock, etc.) while the machine automatically flattens panels, tightens clamps, rotates, and loosens clamps. -- After loading wood into a section of clamps, the operator presses the "Auto Tighten" button. The hydraulic Automatic Carriage then traverses from left to right, flattening panels and tightening clamps that it finds along the way. When the Carriage reaches the right end of its traverse, the machine performs an automatic rotation cycle, which brings the next section of clamps down to the operator’s position. The Carriage then traverses from right to left, loosening clamps that it finds along the way. -- The Fully Automatic Clamp Carrier can also be used in manual or semi-automatic modes, by pressing buttons on the Control Panels. -- Complete with & Includes: -- Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.NOTE: 20 Section machine can produce up to (500) panels per shift!
Equipment Location:WEST COAST
Louis Sicotte
800-374-5009 ext:329