• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
4 Results Found for Router Viewing 1 - 4 of 4 results
RECENTLY ADDED
STANDARD LISTINGS
C.R. ONSRUD - 122C12, ...Twin-Table CNC Router with ATC:Twin 61" x 61" Moving tables can function independently for unload/load on one table while the other is in process or in tandem as a single 122" x 61" table. -- Each Table with:Universal type single-zone vacuum plenum for use with spoil board or pods and includes pop-up pins for panel registration . -- Equipped with:(1) COLOMBO 12 HP 4-Pole HSK spindle, variable speed to 24,000 RPM, and 12-position tool carousel. -- Closed Loop:"Brushless" AC Servo Drive System with precision ground ball screws, 3,400 IPM max. machining speed. All axes ride on extra large THK precision contour linear guideways; cast iron fixed gantry bridge and vertical supports. -- INDUSTRIAL:"AMC" Machine control system is compatible with virtually all CAD/CAM packages that generate standard M & G codes. This machine comes with a "nearly new" spindle; less than (30) working hours on it, as well as an additional ball screw that can be reworked - so that you have a spare!Machine in EX-FACTORY'S Zeeland, MI facility - Cleaned, Checked and Certified by EXF's Senior Tech! ...the "Triple CCC" Seal!X-Axis ball screw rebuilt in late 2017!NOTE: Vacuum Pump not included.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
C.R. ONSRUD 122C16C CNC Router with Twin Tables, ATC & C-Axis:Twin 60" x 60" Moving tables can function independently for unload/load on one table while the other is in process, or in tandem as a single 120" x 60" table, each table has a universal type single zone vacuum plenum for use with spoil board or pods. -- Equipped with:(1) 16 HP HSK-63F type ATC spindle with C-Axis 360° rotation, variable speed from 6,000 to 18,000 RPM, ceramic bearings, and 12-position tool carousel. -- Closed loop "brushless" AC Servo drive system with precision ground ball screws, 1,500 IPM max. machining speed, all axes ride on extra large THK precision contour linear guideways; cast iron fixed gantry bridge and vertical supports. -- INDUSTRIAL"AMC 4" Machine control system is compatible with virtually all CAD/CAM packages that generate standard M & G codes; built into "swivel arm" mounted console. -- Featuring: Simultaneous 3-axis motion for "full 3D" capability, 32-bit "RISC" processor w/115,000 baud download capability; RS-232 port, hand held controller, inch/metric operation, and feed rate & spindle speed override while cutting. -- Includes:Assorted tool holder, manuals and documentation. approximate footprint 199”L x 138”W x 96" HNOTE: There is no vacuum pump included.
Equipment Location:MID ATLANTIC
Norm Schust
800-374-5009 ext:445
C.R. ONSRUD - 144G10, ...CNC Router, 5' x 12' with ATC:Moving gantry CNC Router with a 144" x 60" worktable in a front-to-back configuration; machined Phenolic vacuum plenum with: (3) Zones; cast iron moving gantry bridge & vertical supports. -- Equipped with: (1) 10 HP "ISO-30" Type ATC Spindle with side mounted 8-position carousel and infinitely programmable spindle speeds from 0 - 18,000 RPM. -- Drive system:Closed loop brushless AC Servo motors drive rack & pinion on both sides of the gantry and precision ball screws on the bridge & Z-axis; all axes ride on extra large THK precision contour linear guideways. -- Upgraded Control by Power Automation:Industrial "Centroid" PC Front-End" Machine control system is compatible with virtually all CAD/CAM packages that generate standard M & G codes; built into "Roll Around" Pedestal console. -- Featuring:Simultaneous 3-axis motion, 32-bit RISC processor w/115,000 baud rate download capability; RS-232 port, inch/metric operation, and feed rate & spindle speed override. -- Complete with:25 HP QUINCY Vacuum System, assorted tool holders with collet & cover nut, and documentation.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
C.R. ONSRUD S-Series 98S18R CNC Router with ATC and Roller Hold-Down:"S" Series Moving table CNC Router with: 49" x 98" table in a front-to-back configuration and axis travel of 98" x 74". Phenolic surface, machined universal grid vacuum table single vacuum zone with (3) pop-up positioning pins . -- Thermal heat treated:Stress relieved & normalized steel frame base & moving gantry bridge, vertical supports & Dual Drive 1,400 IPM machining speed with rapids of 2,000 IPM, 14" under bridge clearance and 11" Z-stroke. -- Equipped with:(1) 18 HP "HSK-63" spindle taper ATC quick change spindle with side mounted 12-position tool-changer; spindle speed fully programmable & reversible, infinitely variable speed from 1,000 - 24,000 RPM. -- High Accuracy:Digital Brushless closed loop AC Servo motors drive rack-n-pinion on both sides of the gantry and precision ball-screws on the bridge and Z-axis; all axes ride on extra large THK precision contour linear guide-ways. -- Control: INDUSTRIAL "OSAI PC Front End" Machine control system is compatible with virtually all CAD/CAM packages that generate standard M & G codes; built into "Roll Around" Pedestal console. -- Featuring:Simultaneous 3-axis motion for "full 3D" capability, 32-bit "RISC" processor w/115,000 baud download capability, RS-232 Port, hand held controller, inch/metric operation, and feed rate & spindle speed override while cutting. -- Includes:Assorted tool-holders and manuals,
Equipment Location:WEST COAST
Norm Schust
800-374-5009 ext:445