• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
3 Results Found for Router Viewing 1 - 3 of 3 results
RECENTLY ADDED
STANDARD LISTINGS
(1) 120" (3,050 mm) x 61" (1,560 mm) Moving "Lignostone" table surface, table is machined with a 30 mm x 30 mm grid with threaded bushings in a 150 mm grid. -- Extra Heavy Duty fixed gantry bridge, X-axis travel is 141.7" (3,600 mm), Y-axis is 62.9" (1,600 mm), and Z-axis is 10" (250 mm). -- Equipped with: (6) 10 HP (7.4 kW) Electro spindle routers with RH/LH programmable rotation, spindle speed of 1,000 - 18,000 RPM, with (6) "piggyback" 4 HP (2.9 kW) spindles powered by (4) 11 KVA frequency inverters. -- Closed loop AC Servo drive system with precision ground ball screws for positioning, very fast 2,125 IPM (54,000 mm) positioning feed rate on X-axis; 1,771 IPM (45,000 mm) on Y-axis, all axes ride on extra large REXROTH (star) precision contour linear guideways. -- "OSAI 10/310" CNC control system with: 420 MB Hard drive, 9" high resolution CRT, RS-232 port built into free-standing control cabinet. -- Featuring: (3) Axes simultaneous control, inch/metric operation, and feed rate & spindle speed override (monitor & controls built into movable pedestal). -- Load & unload system is equipped with: (2) Motorized roller conveyors, (1) motorized belt conveyor. (1) Load & unload device with (2) carriages with vacuum pods; axis strokes are CNC controlled; (1) finished parts unload belt conveyor. -- Min. size of parts 6" (150 mm) x 8" (200 mm); max. size of parts 12" (300 mm) x 30" (760 mm) when manufacturing (6) parts at a time.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
CMS PF 102-4T-4M Twin (2) 59" (1,500 mm) x 59" (1,500 mm) Moving tables, "Lignostone" table surface with (2) vacuum zones, tables are machined with threaded bushings for use with clamps and fixtures, can be locked together to form a 59" (1,500 mm) x 120" (3,048 mm) single table. -- Extra Heavy Duty fixed gantry bridge, X-axis travel = 141.7" (3,600 mm) (spindles along bridge), Y-axis = 63" (1,600 mm) (tables front to back), Z-axis = 9.8" (250 mm) . -- Equipped with: (4) 7.5 kW (10 HP) Electrospindle with RH/LH programmable rotation, spindle speed of 1,000 - 18,000 RPM, (4) 4 HP piggyback Electrospindle with RH/LH programmable rotation, spindle speed of 1,000 - 18,000 RPM, All spindles powered by (2) 22 KVA static frequency converter; -- Closed loop AC Servo drive system with precision ground ball screws for positioning, fast 2,125 IPM (54 MPM) positioning feed rate on X-axis; 1,771 IPM (45 MPM) on Y-axis, 393" IPM (10 MPM) all axes ride on extra large Star precision contour linear guideways. -- OSAI "10 310" Series control system, featuring: (8) Axes simultaneous control, RS-232 port, inch/metric operation, and feed rate & spindle speed override (monitor and controls). -- Complete with: Automatic centralized lubrication system with forced grease injection, assortment ETS tool holders with collets, -- Note: Vacuum pumps not included, Y axis on second table has back lash issues.
Equipment Location:EASTERN CDN
Norm Schust
800-374-5009 ext:445
CMS PF 111 4 ATC (1) 120" (3,050 mm) x 61.4" (1,560 mm) moving table. -- Lignostone" table surface with (1) vacuum zones table are machined with threaded bushings for use with clamps and fixtures . -- Extra Heavy Duty fixed gantry bridge, X-axis travel = 141.7" (3,600 mm) (head along bridge), Y-axis = 63" (1,600 mm) (table front to back), Z-axis = 9.84" (250 mm). -- Equipped with: (4) 8KW 11 HP Electrospindle with RH/LH programmable rotation, spindle speed of 1,000 - 18,000 RPM, powered by a (2) 22 KVA static frequency converters; routers has a 8-position carousel type ATC allowing "on-the-fly" tool changes (bi-directional). -- Closed loop AC Servo Drive System with precision ground ball screws for positioning, fast 2,125 IPM (54 MPM) positioning feed rate on X-axis; 1,771 IPM (45 MPM) on Y-axis, 393" IPM (10 MPM) all axes ride on extra large Star precision contour linear guide-ways. -- OSAI "10 " Series control system, featuring: (6) Axes simultaneous control, 9" color high resolution TFT, RS-232 port, inch/metric operation, and feed rate & spindle speed override (monitor and controls). -- Complete with: Automatic Centralized Lubrication System with forced grease injection, (2) vacuum pumps. -- Note: Includes extra rebuilt spindle and 35 tool holders. -- Reason for selling this CMS owner is changing to full sheet panel processing.
Equipment Location:PACIFIC NORTHWEST
Norm Schust
800-374-5009 ext:445