• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
51 Results Found for Brush Cutter and Land Clearing Viewing 1 - 20 of 51 results
PREMIUM LISTINGS
Fecon BH250 Heavy duty head with quick attach from Hydro Ax. Will fit all Hydro Ax machines except 411 and 470. Going to the shop for cleaning up. Has 2 Rexroth AA2FM73 motors. Heavy duty frame, larger bearings, 6 groove belts and heavy duty rotor. Uses old style paddle teeth. Call with questions. $25000.00 after we go through it.
Equipment Location:Prescott, AZ
Reliance Brush Management Inc.
928-386-0369
Fecon BH80 Shredder, 2nd Owner, 70% life, PTO Driven, Ready to Go!! $8,000 419-687-0169
Equipment Location:Plymouth, OH
419-687-0169
Fecon BH80 Skid steer size head with heavy duty rotor and paddle teeth. Head is currently set up to run on Hydro Ax machines. Danfoss 75cc Motor. Heavy duty skids, rotor and 4 groove belt to handle higher horse power. $10,000.00 obo
Equipment Location:Prescott, AZ
Reliance Brush Management Inc.
928-386-0369
2007 Geoboy 4x4 with 200hp Cummins 5.9l and Fecon BH120 mulching head in excellent shape. Head is heavy duty with larger bearings and thicker shroud. Complete set of new teeth just installed. New head bearings 100 hrs ago. Reversing radiator fan and on-board compressor. Hyrdaulic mulcher door. Upgraded air filter to single filter. A/C blows cold. 5262 hours on machine. Just brought in from completed project and serviced, ready to go to work. 928-386-0369 Price Reduced to $47,000.00
Equipment Location:Prescott, AZ
Reliance Brush Management Inc.
928-386-0369
Hydro Ax 511E with Fecon BH120 grinding head. 2 speed motors in the head. Extensive upgrades including factory joystick steer, Rexroth load sense hydraulics, Danfoss 90 series pump for head, new Rexroth A6V motors for head. John Deere 6068T engine. Windshield converted to EX series style, new windshield. Oil cooler upgraded to EX style aluminum oil cooler. Unit pulled just in and serviced at the end of last project. $47,000 obo
Equipment Location:Prescott, AZ
Reliance Brush Management Inc.
928-386-0369
Prentice 2864 with Fecon Mulching Head with 2 speed motors. 3986 hrs. Cummins 6.7l 260hp. 28L tires. Machine has joystick steer, rear view camera and rear winch.
Equipment Location:Prescott, AZ
Reliance Brush Management Inc.
928-386-0369
This mulcher is 3 point hitch, needs 55-90 hp, working width is 69", 4.7" material capacity, wt.2140lbs. Other sizes available: 49", 59" & 79" Call for size and options available. This is a valuable tool for cleaning up brush and small trees. 937-382-4549
Equipment Location:Wilmington, OH
Linndale Equipment
937-382-4549
STANDARD LISTINGS
For fast and easy stump removal, model 3633 3 point for Cat I or II, using a slip clutch drive protection system, you can cover a greater surface with the 45 degree swing arc. easily controlled by hydraulic levers. Minimum HP requirement is 45hp. Max is 100hp. Wt. 880lbs. Cutting wheel diameter is 36", overall length is 80"
Equipment Location:Wilmington, OH
Linndale Equipment
937-382-4549
2014 BANDIT 3500 Fixed Head Stump Grinder, 40" diameter with Buck tooth wheel, 275HP, 6.8L, John Deere diesel, Cab, heat, A/C, 15,000 pound rear mounted winch, 24 volt Proheat system, Cat 315L U/C with 24" triple grouser pads, one owner bought new, good condition.
Equipment Location:Lonsdale, MN
D & T Equipment
612-867-9261
BANDIT 3680 TRACK BEAST RECYCLER TRACK BEAST RECYCLER
Equipment Location:Bridgeville, PA
Anderson Equipment Company
518-527-8086
2014 Barko 920 w/2,500 Hrs., 6.7L Tier 3 Cummins, 28L X 26 Tires, 20,000 LB Winch $225,000
Equipment Location:Lake City, FL
Quality Equipment & Parts
386-754-6187
New Barko 930B IN STOCK with Fecon BH230H-3 Mulching Attachment , Rear Camera With IN Cab Monitor , Hydraulic Winch , 28LX26 Tires . Please call Larry Prater @ 865-599-9486
Equipment Location:Knoxville, TN
Power Equipment Co
865-577-5563
2015 BARKO 930 1,572 Hours, AHWI M650 Mulching Head, Winch, Cummins 8.3L Engine, 34" Tires, Joystick Steer, AC/Heat, Ready to Work!
Equipment Location:Hickory, MS
TRAXPLUS
601-635-5543
2011 BARKO 930 Wheeled Mulcher. Cummins Engine 305 HP. Engine is currently knocking will need engine work. Clean belly pan, no visible leaks. Engine Covers in shop, not shown in photos and are in excellent condition. Rear view camera, very clean inside and out. MIDIFORST Mulcher Head. Approx. 3100 HRS. Shipping: 26’ X 10’4 X 9’ 4” wide, approx. weight: 31,000LBS. 28L-26 Tires in very good condition. SER#: 11193023717 Located in East Texas
Equipment Location:Alto, TX
Cloverfield Machinery, LLC
903-707-0317
2011 Barko 930 Mulcher. Super Forst 250 Mulching Head. Excellent condition, fully operational and working unit. Tires 28L-26, front are new, rear are approx. 60%. Heat and A/C work well. Video of unit running. Hour Meter: 3380. Shipping: 26’ X 10’4 X 9’ 4” wide, approx. weight: 31,000LBS Located in Northwood OH
Equipment Location:Northwood, OH
Cloverfield Machinery, LLC
903-707-0317
2017 BARKO 930B The 930B is a highly maneuverable mulcher built to withstand tough terrain, all while providing better fuel efficiency and increased productivity.
Equipment Location:Hickory, MS
TRAXPLUS
601-635-5543
Barka 930B Brush Cutter/Mulcher Product No. 4508 Barka 930B Brush Cutter/Mulcher 2016 2600 hours FAE 300U Texas Series Head price: $279000 Machine Type: Brush Cutter/Mulcher Manufacturer: Barko Model: 930B Year: 2016 Machine Location: South West
Equipment Location:Southwest
Mike Stuck
828-773-2204
2008 Bron 475 Mulcher Complete with FAR 300U250 Mulching Head and Rock Rotor Type Teeth, CAT C13 475 HP Engine, 5440 Hours, D4 Undercarriage With 32" Double Grouser Tracks. New Track Chains, Rollers and Sprockets Were Installed 350 Hours Ago, All Pumps and Motors Replaced 830 Hours Ago, Fire Suppression System, Positive Air Shut Off System, Wabaso Heater for Cold Weather Starts, Back Up Camera, Flex Air Reversing Fan Unit is Completely Serviced and Ready for Work, One Owner and Very Well Cared For. Also Includes an FAE 300S Sub Soiler, 14" Deep Entire Package For $310,000.00
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
2011 Bron 700 Mulcher, Tyalta Mulching Head, Currently Has 2640 Hours, Cat C18 700HP Engine, Berco Undercarriage D7 with 36" Single Grouser Pads. Engine and Hydraulic Heater for Cold Weather Starting, Backup Camera and 2 Internal Cameras, Touch 1 Digital Display, Fire Suppression System, And On Board Air Compressor. Unit has been completely serviced and is ready to go to work. Please Call for more info
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525
11,000 hours Just spent 26,000.00 on the unit and have the invoices from Cat dealer. Repairs made to engine and undercarriage Double pumps Forestry protected 36" bucket X5 Iron Wolf mulching head rebuilt 2 years ago Spare parts included such as teeth and holders
Equipment Location:Brainerd, MN
U.S. Equipment Broker, LLC
877-451-9525