• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
2 Results Found for Edgebander Viewing 1 - 2 of 2 results
RECENTLY ADDED
STANDARD LISTINGS
BRANDT KDN-530C SINGLE SIDED EDGEBANDER0.4 - 6 mm (1/4") Edge cap., panel thickness 5/16" - 1-5/8", min. panel length 160 mm (6-3/8") and 65 mm (2-1/2") min. width; line control (NO limit switches) for workstation function. -- Automatic height adjustment with top pressure beam for all work station, equipped with digital height indicator for panel heights between 8 mm - 40 mm. -- PC-16 Program Control; with 7-1/2" VGA screen 8 MB IDE flash disk, 8 MB RAM, Internal Modem for remote diagnostic link; Signal infeed light to insure proper spacing between panels. -- Equipped with: Quick heat-up glue system, (approx. 12 minutes) w/glue tank for maintenance & glue color change. Glue temperature indicator for both the glue pot and glue roller with LED thermostat, automatic temperature setback if the machine is idle for (15) Min or more. -- The glue applicator roller is also reversible and retractable from the fence line. -- Automatic magazine for strip & coil (Large coil table 800 mm dia. to accommodate large coils of 3 mm PVC) stock, 3 mm PVC guillotine. -- (1) Drive plus (1) split secondary roller "pneumatically controlled" pressure sections. -- Workstations: End trim (1/4 HP - 12,000 RPM motors), chamfers 0° - 15°. -- Top & bottom flush/radius trim, bevels 0° - 15° (1/2 HP - 12,000 RPM motor), with insert knives for 3 mm PVC radius & "quickset" with digital counters. -- Top & bottom scraping for 3 mm radius, pneumatically controlled indexing system with dust collection. -- (1) Motor corner rounding station for "on-the-fly" corner rounding (0.5 HP - 12,000 RPM motor). -- Top & bottom buffing (0.25 HP - 2,800 motors). -- End trim & flush trim stations have HF motors w/electronic brakes; feed chain track speed 36 FPM, 3 HP feed drive. -- Complete with: Operator control panel w/PLC (Programmable Logic Control) keypad & LED readouts, and used tooling.
Equipment Location:SOUTH
Ed Webb
800-374-5009 ext:377
BRANDT KDN-530C SINGLE SIDED EDGEBANDER0.4 - 6 mm (1/4") Edge cap., panel thickness 5/16" - 1-5/8", min. panel length 160 mm (6-3/8") and 65 mm (2-1/2") min. width; line control (NO limit switches) for workstation function. -- Automatic height adjustment with top pressure beam for all work station, equipped with digital height indicator for panel heights between 8 mm - 40 mm. -- PC-16 Program Control; with 7-1/2" VGA screen 8 MB IDE flash disk, 8 MB RAM, Internal Modem for remote diagnostic link; Signal infeed light to insure proper spacing between panels. -- Equipped with: Quick heat-up glue system, (approx. 12 minutes) w/glue tank for maintenance & glue color change. Glue temperature indicator for both the glue pot and glue roller with LED thermostat, automatic temperature setback if the machine is idle for (15) Min or more. -- The glue applicator roller is also reversible and retractable from the fence line. -- Automatic magazine for strip & coil (Large coil table 800 mm dia. to accommodate large coils of 3 mm PVC) stock, 3 mm PVC guillotine. -- (1) Drive plus (1) split secondary roller "pneumatically controlled" pressure sections. -- Workstations: End trim (1/4 HP - 12,000 RPM motors), chamfers 0° - 15°. -- Top & bottom flush/radius trim, bevels 0° - 15° (1/2 HP - 12,000 RPM motor), with insert knives for 3 mm PVC radius & "quickset" with digital counters. -- Top & bottom scraping for 3 mm radius, pneumatically controlled indexing system with dust collection. -- (1) Motor corner rounding station for "on-the-fly" corner rounding (0.5 HP - 12,000 RPM motor). -- Top & bottom buffing (0.25 HP - 2,800 motors). -- End trim & flush trim stations have HF motors w/electronic brakes; feed chain track speed 36 FPM, 3 HP feed drive. -- Complete with: Operator control panel w/PLC (Programmable Logic Control) keypad & LED readouts, and used tooling.
Equipment Location:MTN/CENTRAL CDN
Ed Webb
800-374-5009 ext:377