• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
4 Results Found for Edgebander Viewing 1 - 4 of 4 results
RECENTLY ADDED
STANDARD LISTINGS
BRANDT "KD-56" Single sIded Edgebander0.4 - 3 mm (1/8") Edge thickness cap., automatic coil & strip feed magazine, guillotine for 3 mm PVC banding, fast startup (12 Min heat up) glue system; reversible rotation glue applicator roller. Workstations: -- Vertical travel double motor front & rear end trim, 0.25 HP - 12,000 RPM motors; -- Top & bottom flush/bevel trimmers, bevel 0° to 15°, 0.35 HP - 12,000 RPM motors; -- Top & bottom PVC scraping unit for up to 3 mm radius (not installed). -- Top & bottom buffing unit, 0.15 HP - 2,750 RPM ea. motor; feed speed 30 FPM.Equipped with: -- Operator control panel at eye-level, electronic line control (no limit switches), digital height indicator on holddown beam, electronic motor brakes on trimmers, 200 Hz electronic frequency inverter, used tooling & sound enclosure w/window. Very Low Hours!!
Equipment Location:SOUTH
Ed Webb
800-374-5009 ext:377
BRANDT KD-56 SINGLE SIDED EDGEBANDER0.4 - 3 mm (1/8") Edge thickness cap., automatic coil & strip feed magazine, guillotine for 3 mm PVC banding, fast startup (12 Min heat up) glue system; reversible rotation glue applicator roller. -- Workstations: Vertical travel double motor front & rear end trim, 0.25 HP - 12,000 RPM motors; top & bottom flush/bevel trimmers, bevel 0ø to 15ø, 0.35 HP - 12,000 RPM motors; top & bottom PVC scraping unit for up to 3 mm radius; top & bottom buffing unit, 0.15 HP - 2,750 RPM ea. motor; feed speed 30 FPM. -- Equipped with: Operator control panel at eye-level, electronic line control (no limit switches), digital height indicator on holddown beam, electronic motor brakes on trimmers, 200 Hz electronic frequency inverter, used tooling & sound enclosure w/window.
Equipment Location:ATLANTIC CDN
Ed Webb
800-374-5009 ext:377
BRANDT "KD-56" Single sIded Edgebander0.4 - 3 mm (1/8") Edge thickness cap., automatic coil & strip feed magazine, guillotine for 3 mm PVC banding, fast startup (12 Min heat up) glue system; reversible rotation glue applicator roller. -- Workstations: Vertical travel double motor front & rear end trim, 0.25 HP - 12,000 RPM motors; top & bottom flush/bevel trimmers, bevel 0° to 15°, 0.35 HP - 12,000 RPM motors; top & bottom PVC scraping unit for up to 3 mm radius; top & bottom buffing unit, 0.15 HP - 2,750 RPM ea. motor; feed speed 30 FPM. -- Equipped with: Operator control panel at eye-level, electronic line control (no limit switches), digital height indicator on holddown beam, electronic motor brakes on trimmers, 200 Hz electronic frequency inverter, used tooling & sound enclosure w/window.Cleaned and Checked: All pneumatic hoses replaced, Glue pot recently rebuilt, new blades on double end trims, new knives on top and bottom trimmers, new knves in top and bottom glue scraper, and new buufing wheels.
Equipment Location:PACIFIC NORTHWEST
Ed Webb
800-374-5009 ext:377
Electronic line control Automatic height adjustment with top pressure beam for all work stations Automatic magazine for strip and coil feeding Hotmelt granulate glue application system Reversible glue roller application Double motor end trim unit for precision trimming with tilt range from 0 – 15 degrees. Equipped with scraping unit with top, bottom and side tracing device for finishing thick (primarily 2mm or 3mm ) PVC edges Top and bottom buffing unit Edgeband thickness: Strips 0.4 - 3 mm (0.016" - 1/8") (max. 3 x 45 mm) Coiled material 0.4 - 3 mm (0.016" - 1/8") (max. 3 x 30 mm) (max. 0.8 x 45 mm) Edgeband length Strip material: 229 mm (9") min Panel length min. 140 mm (5 1/2") Panel width min. 60 mm (2 3/8") Panel thickness - min. 8 mm (5/16") Max. 40 mm (1 5/8") Feed speed 9 m/min (30 FPM) End trim unit - two motors 0.18 kw (.25 HP ea) End trim cutting speed 12,000 RPM Tilting range 0 – 15 degrees Flush trimming unit 0.27 kw (.33 HP ea) Cutting speed 12,000 RPM Tilting range 0 – 15 degrees This Brandt KD-56 Optimat edgebander is ready to load. The seller has confirmed that this is in good working/runnning condition
Equipment Location:FL
Carolina Machinery Sales, Inc
704-288-1904