Boring Machines For Sale

This machine has been cleaned, repaired and checked over, ready for a new home! (2) 3HP motors 460V 3Ph 6 pneumatic stops for use in horizontal or vertical drilling 72" precision machined back fence 6 fence stops, 4 table stops (2) 23-spindle drilling heads, one horizontal, one vertical 3-position turret dept stop on vertical head 5 pneumatic holddowns Magnetic motor controls 32mm spindle centers 10mm collet diameter 1725 RPM spindle speed 90 PSI air requirement 3" max. drill stroke

RITTER R-46 VH BORING MACHINE(2) 23-Spindle boring heads; 23-spindle vertical bottom head (drills from the bottom up) 90° to the 23-spindle horizontal head (for edge boring). -- T-Shaped 36" x 72" table surface area (not solid type); spindles on 32 mm centers and with 10 mm collets. -- (2) 3 HP BALDOR motors (one ea. head), 3" boring stroke and 3-position boring depth turret setting. -- Equipped with: Foot pedal control, 72" back fence with (6) stops, (5) pneumatic horizontal & (4) vertical holddowns. (Cannot be used as a single line boring unit)

RITTER R-19 F1 SINGLE ROW LINE BORER -- Specifications:Single row 23-spindle Line Drill, 32 mm spindle centers. -- 3 HP - 3,450 RPM motor; pneumatic activation of the drill cycle, drills from the top-down. -- 12" Max. depth from spindles to back fence, 3" max. stroke of head, and accepts 10 mm drill shanks. -- Equipped with:14" x 48" Table, 60" back fence with (4) fence stops and repetitive line pins. -- Complete with:(2) spring loaded hold-downs pins. Vernier scales in "X"/"Y" for quick stop pin setup/changeover adjustments.

SCHMALZ VCBL-K 2 125x75x100 Q VACUUM PODS: -- Specifications: Quantity: (35) NEW, never been used SCHMALZ Vacuum Pods. -- Dimensions: 125 mm long x 75 mm wide x 100 mm height with crossways clamping arrangement. -- Prefixation to console by means of vacuum. -- Sealing edges and friction surfaces tailored for wooden surfaces with high dimensional accuracy. -- Hose-free vacuum clamping system for CNC Machining Centers with console table (2-circuit system). -- The vacuum blocks are prefixed to the consoles and secured against movement during setup. -- Safe and precise clamping of the workpiece and the vacuum blocks on the console with the second vacuum. -- Damage-free clamping with the highest precision and holding force -- Actual Model is SCHMALZ - VCBL-K 2 125x75x100 Q.

SCM TOP 35 BORING MACHINE(35) Spindles on 32 mm centers, pivoting boring head, drills vertically from the top and horizontally from the rear,Specifications: -- 0° - 90° Motorized tilting of the head, can be locked at any angle between; max. panel width 1.280 mm. -- (2) 6 HP - 2,800 RPM Motor; quick boring depth setting with (6) depth stops on revolving turret, viscous damper for smooth drilling & through boring. -- Designed with: Lead screw w/veneer scale for head displacement setup.Complete with: -- Back fence w/flip stops, plus fence extension with (4) mechanical reference stops, (4) pneumatic hold-downs; 33" worktable height.

SCM STARTECH 23 BORING MACH. (CONSTR. & LINE BORING):Specifications: -- 23-Spindle boring head (aluminum alloy single block), drills vertically from top & horizontally from rear. -- Manual tilt with gas shock cylinder assist, positive stop at 45° for boring at an angle; 3 HP - 3,400 RPM motor. Equipped with: -- 6-Position turret depth stop, 2-3/8" boring head stroke with digital readout setting, hydraulic brake for vertical "through boring". -- (2) Air hold-down clamps, foot pedal operated. -- Index pins for line boring, side fences. -- Actual Model is SCM STARTECH 23

SCM TECH Z 30 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications:Working Field "X" axis 120" (3,050 mm); "Y" axis 52.7" (1,340 mm) for routing & 44" (1,118 mm) for boring; "Z" axis stroke 7.8" (200 mm); max. material thickness 3.9" (100 mm). -- Positioning Speed:"X" & "Y" Axes are 197 FPM (60 MPM); "Z" axis is 72 FPM (22 MPM).Axes positioning by: AC Brushless motors and YASKAWA drives; high precision ball screw drive system in "X", "Y". "Z" Axes;All axes ride on prismatic guideways & sliding blocks. -- Worktable:(6) "TV" Tubeless mobile support rails, (2) vacuum pods per rail; (4) pneumatic lifter rails for heavy panels.(6) Pneumatic pop-up backstops, (6) pneumatic pop-up front stops; (2) pneumatic pop-up side stops.LED Display positioning assistance for the support rails & vacuum pods; (2) independent working fields. -- Boring Head:3 HP (2.2 kW) motor - 4,000 RPM; (15) independent vertical spindles: (8) Spindles in "X" & (7) spindles in "Y".(6) Horizontal spindles (2 + 2) in "X" & (1 + 1) in "Y-axis".(1) X-axis grooving saw with 100 mm dia. blade - 6,000 RPM. -- Machining:(1) 10 HP (7.5 kW) Electro-spindle router with: HSK F63 Adaptor; variable speed from 1,000 - 24,000 RPM, max. torque achieved at 12,000 RPM.Static inverter for stepless speed & rapid shutdown rotation.(1) 6-Position ATC tool plate mounted on the on the machine for "on the fly" ATC; max. tool weight is 8 kG (17.6 Lbs). -- Operator & Machine Control:PC Front-End with: SCM "UNIVERSAL K2" + "Xilog Plus" + Windows "XP" Pro Operating System; 15" CRT color display, CELERON 2 GHz processor, enclosed in air-conditioned cabinet. -- Complete with:(1) 100 m³/Hr Vacuum Pump; automatic lubrication system; "BUMP STOP" safety system. -- Actual Model is SCM TECH Z30 R6

SCMI STARTECH/23 23-Spindle Construction Boring Machine.Specifications: -- Distance between spindles 32 mm (1.26"), Maximum drilling head distance 704 mm (27.72"), Maximum drilling depth 45 mm (1.77"). -- Panel thickness 10 - 75 mm (0.39" - 2.95"), Maximum panel width under bridge 1,000 mm (39.37"). -- Maximum panel size:270 mm(10.63") (with vertical head), 130 mm (5.12") (with horizontal head). -- Drilling head stroke 63 mm (2.48"), Tool diameter 5 - 10 mm (0.20" - 0.39"), Tool length 55 - 75 mm (2.17" - 2.95"). -- 26-1/4" x 40" x 33-1/2" H Table, 2.64 kW (3-1/2 HP) 3,390 RPM Motor.Equipped with: -- 23-Spindle Boring head (Aluminum alloy single block), Drills vertically from top & horizontally from rear. -- Manual tilt with Gas shock cylinder assist, Positive stop at 45° for boring at angle. -- 6-Position Turret depth stop. -- (2) 3" Diameter Air hold-down clamps, Foot pedal operated. -- Index pins for line boring, 15-1/4" L x 1-1/2" H Side fences.Complete with: Operation & Maintenance Manual & SHOP FOX Mobile Base with Swivel Casters. -- Dimensions: 58" x 48" x 46" H. Weight: 1,100 Lbs.

35 spindles (vertical/horizontal) 32mn spacing left/right fences quick release chucks 2800 rpm spindle speed 5 HP 3 Phase

SILVER SJK-21 Horizontal & Vertical Boring on 32 mm centers.(21) Spindles in line on one boring head (aluminum alloy single block), drills vertically from top & horizontally from rear. -- Features pneumatic adjustment for horizontal boring.Specifications: -- Max drill dia. is 1.38" (35 mm); Max panel thickness is 2.36" (60 mm); Table size 36" x 19.75" (914 x 502 mm). -- Length of cross fence is 102" (2,600 mm); length of aluminum table fences are 39" (1,000 mm) to the left and 28" (710 mm) to the right with flip stops.Equipped with: -- Depth stop adjustment, (2) holddown air cylinders, and foot pedal operation for clamping/drilling cycle. -- 2 HP - 3,600 RPM TEFC motor with thermal overload protection and low voltage controls.. -- Includes (12) Quick change chucks..

SILVER SJK-19T Line Boring MachineSingle line vertical boring machine with (19) spindles at 32 mm centers driven through a powerful 1.5 HP motor.Equipped with: -- Foot pedal controlled pneumatic boring cycle -- Adjustable boring feed speed -- Adjustable boring depth for fast changeover -- 2 Pneumatic cylinder clamp for solid hold-down to the material. -- 3 Meter long back fence for long line boring with flip stops -- (2) Positioning pins at both end of boring head to set up for longer line boring quickly -- Quick change chuck for fast changeover (19 pcs included)Specifications: -- No. of Spindles....................................................................................... 19 -- Distance between each spindle.............................................................. 32 mm -- Max Boring Depth .................................................................................. 60 mm (2.36") -- Working Table Size................................................................................ 800 x 500 mm (31.5" X 19.68") -- Table Height from Floor......................................................................... 780 mm (30.35") -- Max Boring Depth from Edge................................................................. 155 mm (6") -- Electric .................................................................................................. 220 V / 60 Cy / 3-Ph -- Machine Size (LxWxH) ........................................................................... 920 X 670 X 1490 mm (36.25" x 26.37" X 58.66") -- Net Weight ............................................................................................ 220 kgs. (484 Lbs)

---In Auction---NO RESERVE--- 2-Spindle Vertical Boring Machine Equipped with: - 1 HP - 3,400 RPM Motor. Complete with: - "30C-W20” 2-Spindle Boring Head, with Maximum bit cap. 15 mm (0.59”), Bit threads 7/16 - 14 TPI Right-hand, Spindle speed 4,000 RPM Details, Photos, Videos, Bidding: https://exfactoryauctions.com/Detail/BV-230384/event/A051324$1

VITAP LINEA 42 Line Boring SystemSpecifications: -- (2) Drill heads of (21) spindles ea., drills from bottom up, ea. support with 2 HP motor and (21) spindle boring block w/panel support mounted on top; -- Drills panels from 100 - 3,000 mm in length, and 100 - 950 mm in width. Complete with: -- Digital readouts for boring blocks, 2,000 mm bar scale fence with (5) adjustable flip stops. -- (2) Moveable overhead pneumatic holddown cylinders, foot pedal for clamping & boring cycle.

VITAP ALFA 27 CONSTRUCTION BORING MACHINE27-Spindle boring head on 32 mm centers, drills vertically from bottom-up and head rotates to horizontal position for edge boring, head rotation is pneumatic with switch control. -- 2-3/4" Max. drilling depth, 2.5 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences for construction boring, (3) pneumatic holddown clamps, 118" line boring fence w/ (4)flip-stops, pneumatic foot pedal control.

Vitap Forma Boring Machine 21 Vertical Spindles 21 Horizontal Spindles Approx $1000 worth of carbide bits DUAL LINE machine and there are (2) vertical lines of 21 spindles each for a total of 42 ...... PLUS an additional single line of 21 horizontal spindles!

VITAP - ALFA 21, ...Construction Boring MachineSpecifications: -- 21-Spindle boring head on 32 mm centers; drills vertically from bottom-up & head rotates to a horizontal position for edge boring; head rotation is pneumatic with switch control. -- 2-3/4" Max. drilling depth, 2.5 HP - 2,800 RPM motor, pneumatic drill head advance with speed control. Left & right flip stops mounted onto a custom-made sliding back fence (see photos for details). Details: -- (4) Pneumatic hold-down clamps; pneumatic foot pedal control. -- Complete with: Magnetic starter & overload protection.

Weeke ABD 060 Bore & Dowel Machine This machine will be available in December 2023. - CNC DOWEL INSERTER FOR HORIZONTAL DRILLING AND DOWEL INSERTING - ENGINEERED TO SPRAY GLUE OR WATER - FEATURES A SORBTECH MAIN BEAM TO MINIMIZE VIBRATION - PNEUMATIC CONTROL OF CEBTER STOP AND RIGHT AND LEFT FENCES - OPEN END TABLE FOR MACHINING PARTS LONGER THAN 48” - VIBRATING HOPPER FOR AUTOMATIC FEEDING OF DOWELS - LARGER 17” DISPLAY AND WOODWOP PROGRAMMING - SERVO CONTROL OF DRILL HEIGHT AND DRILL DEPTH VIA PROGRAM - 3 INDEPENDENT SPINDLES ON 32MM CENTERS - BAR CODE READER

Weeke ABD 050

Weeke ABD 050

WEEKE VENTURE 05S CNC MACHINING CENTER: -- Specifications: Working Field "X" Axis is 2,510 mm (98.8"); "Y" axis is 1,250 mm (49.2"); "Z" axis stroke is 125 mm (4.9"); max. material thickness 85 mm (3.3"). -- Positioning Speed:"X" Axis 262 FPM (80 MPM); "Y" axis 262 FPM (80 MPM); "Z" axis 66 FPM (20 MPM); head travels on THK linear motion guides on all axes. -- Worktable:(6) Adjustable K-Table tubeless support rails with (2) vacuum pods per rail.(6) Pneumatic backstops; (6) pneumatic front stops; (2) pneumatic side stops; (2) working zones. -- Boring Unit:3.6 HP (2.7 kW) Motor; programmable variable speed 1,500 - 7,500 RPM; (8) independent Vertical drill spindles, (4) spindles in "X" axis & (4) in "Y" axis;(6) Horizontal spindles with (2 + 2) in "X" axis & (1 + 1) in "Y" axis; (1) "X" axis grooving saw with a 100 mm dia. saw blade. -- Machining:(1) 8 HP (6 kW) Electro spindle router with ETP 25 "Hydro-Chuck" QC adaptor, powered by a frequency inverter w/programmable 1,250 - 18,000 RPM; RH/LH rotation. -- Operator & Machine Control:WEEKE PC 85T "POWER CONTROL" + Windows "XP" + WoodWOP 5.0 Operating System; BECKHOFF PLC for (3) axes with linear, circular & helical interpolation.15" TFT monitor, industrial keyboard for data entry, CD R/W & floppy drive; 40 GB hard drive; modem, USB slot, RS-232 serial interface for possible simple PC connection; all mounted in separate free-standing Control Panel. -- Complete with:(1) 100 cbm/Hr Vacuum Pump, Scrap Conveyor, Handheld Pendant & Safety Fences. -- Actual Model is WEEKE - VENTURE 05S.