You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
2478 Results Found for Sawmill Viewing 1 - 20 of 2478 results
RECENTLY ADDED
PREMIUM LISTINGS
Woodland Pro 4000 K4 Industrial Portable Mill w/8 HP Honda on Hydraulics, 38 1/2 HP Kubota Engine, 1 owner & Operator, Barn Kept, Engines are perfect, Super Nice, 2" Bands w/ Extra Bands, Board Drag Back $19,900 423-507-4404
Equipment Location:Riceville, TN
Cascade Equipment Company
423-507-4404

Cardinal Circular Sawmill

Call for Price
COMPLETE SAW MILL CARDINAL - SWP complete semi-automatic saw mill consisting of 3-strand log in-feed chain deck; 2-strand chain seperator table; de-barker in-feed chain conveyor, MORBARK rosser head type 60 HP de-barker; c/w out-feed chain conveyor with hydraulic log tipper; 3-strand mill in-feed chain conveyor; CARNIDAL incline separator; CUT-CO 36"twin saw with twin overhead blades; cobination single cant twin slab carrier with manual refuse station; CARNIDAL incline slab de-scrambler; re-saw/grading in-feed roll conveyor; CARDNIAL 689C 42" slab re-saw automatic saw with MUDATA PLC control; 6-strand edger in-feed table; 7-strand re-saw out-feed table; CARDINAL 4-strand finished lumber out-feed table; CARDINAL incline de-scrambler; CANADIAN TRIM double end precision cut to length saw; 6-strand trim saw transfer table; waste/scrap recovery system. HAS THE CAPACITY TO SAW 40,000 BD FT OF 8 FT CEDAR IN 8 HOURS LOCATED IN ARTHURETTE, NB. COMPLETE SAW SHARPENING SYSTEMS INCLUDED. MILL COMES WITH 46 ACRES OF LAND.
Equipment Location:Moncton, NB
Graystone Quarries
506-961-2445
350KW gen set 3000 hrs
Equipment Location:Worden, MT
Lemco
406-698-6868
350 KW Genset, 800 hrs., $35,000
Equipment Location:Worden, MT
Lemco
406-698-6868

Comact 8ft Lumber Stacker

Call for Price
Comact 8' Lumber Stacker
Equipment Location:Beaver, WA
LPS Equipment & Acquisition Co.
731-986-4351
Cooper Machine has a New 2016 MIT True Lumber System available and in stock. This machine includes: - For logs 8-17' long and up to 36" in diameter - 17.5° stationary slant carriage has three reinforced steel knees, pneumatic dogs, motorized log rotators, board and sawdust conveyor, full hydraulic drive and three arms to assist in rotating logs on the car - Inclined double cut 17.5° movable headrig with 49 inch solid steel wheels, 6" band, high tension pneumatic system, mobile pressure guides, mechanized rails and winch for headrig movement with 30hp motor with electromagnetic brake frequency inverter - 6 x 6 climate controlled cab - Comes as a modular unit with 20' log infeed and substeel - Includes five days of startup with both a MIT and Cooper technician. This machine does not include any setworks, so you can use whichever system you want to. Setworks can be added at an additional price. This machine has a smaller footprint than a conventional carriage. The modular unit allows for lower installation and start up costs. Built heavy with a combined modular weight of over 90,000lbs. This machine is currently disassembled for shipping. It's priced ready to move. For more information, give us a call.
Equipment Location:Wadley, GA
Cooper Machine Company, Inc.
478-252-5885
Detroit V8, 71 Gen Set, 3 Phase, 480V, 235 KW, Ready to Work $8,000; Scragg Mill & other Equipment Available 574-646-2707
Equipment Location:Bourbon, IN
Lemler Pallet Inc
574-646-2707
1. Edminston vertical edger, $10,000.00 2. 36" Edminston sawmill 4 H.B. with new computer setworks (T.I.C.) with log turner $18,000.00--$12,000.00 invested in setworks alone. 3. Edminston 22" log deck, $6,000.00 4. 48" 3 Knife Precision Chipper with dual loading chutes $18,000.00 5. Cummings Genset 260 KW. 3 phase 6,000 hours solid and dependable. $15,000.00 6. 206 HMC Debarker with infeed deck $9,000.00 7. 41" green chain 3 strand with roof top chain and forward and reverse. $4,000.00 8. Frontline 36" belt conveyor $5,000.00 9. Mobark 17' vibrating conveyor $1,500.00 10. Screw conveyor to load open top containers $8,000.00 Everything is 3 phase, buy complete or separate everything is in good running condition, Motivated seller.... 570-437-2090
Equipment Location:Milton, PA
570-437-2090
(2) Hurdle 3HB Sawmills, Lots of New Parts, Can been seen in Operation $30,000 each 270-459-0913
Equipment Location:Burkesville, KY
Stalcup Lumber
270-459-0913
Used Mini Mill $14,500
Equipment Location:Aiken, SC
Hutto Wood Products
803-564-7173
(3) Ingersoll-Rand air compressors; 15, 20 and 30 HP, excellent condition, clean, BEST OFFER
Equipment Location:Dolgeville, NY
Steciak Logging & Lumber
315-429-3496
Used Linden double acting step feeder(s), Linden 4-36-50 log step feeder, serial# 98-1151 and 1152, 4 steps, 36" stroke, 50 degree angle, 25 hp electric motor belt driven to SM Cyclo reducer drive, approximately 4ft elevation gain, each box is 24" wide and is referred to "narrow box version" and has maximum contact on logs, 22 boxes wide, log length capacity 50ft, factory prints/drawings can be view in photos, Step feeder can be used as 2 individual 25ft long feeders and is priced at per 25ft section- 2 total section available - both run independently and has a electric motor and gear reducer for each section, estimated weight of each 25ft section is approximately 50,000 LBS or 100,000LBS for the total 50ft section. All information is from Linden MFG and we have a copy of the original drawings available, Step feeders are stored in our yard and ready for prompt shipment. Price includes loading onto truck, we can also quote you a delivered price to your location. YouTube videos of step feeder before it was dismantled: https://youtu.be/r-4vExQlDQM , https://youtu.be/uQ4pI19p9t8 , https://youtu.be/HziXK2CtgsI , https://youtu.be/pk8iqnsIB78 , https://youtu.be/MidD6aN8Zmw
Equipment Location:Toledo, WA
Machinery Scene
360-864-2800
MAC 144MPH361W Dust System; 10 Gauge CS Construction; Explosion Vents Provide A 65:1 Vent Ratio; Filter Includes A 20 HP Bag Cleaning Centrifugal for Explosion Proof (NEMA9)Motor 230/460/3/60HZ; 1/2 HP Explosion Proof (NEMA9)Boldor Motor Rotates the Internal Cleaning Mechanism 230/460/3/60HZ; (2 EA) 1/8th" NFPT Must Have Pipe Plug if Differential Pressure Gage is Not Used, A Magnehelic Kit is Provided; Horizontal Dimensions are Measures Along Housing Diameter; Unit Includes (361) 16 oz Polyester/Dacron Filter Bags w/ 49000 CFM Galvanized Bag Cages Providing 5202 SQ.FT of Cloth; Est. Wt. Less Structure & Other Accessories (13140 lbs); Unit Includes (2) 135-170 Degree F Sprinklers; The Power House Filter Incorporates a Low Pressure High Volume Reverse Air Cleaning Mechanism w/Top Bag Removal. Clean Air is Generated by a Direct Drive 3600 RPM High Efficiency Fan. Power House Model 144MPH w/ 5205 Sq Ft of Cloth. $49,000
Equipment Location:Tompkinsville, KY
Froedge Machine & Supply
270-487-5891
62" McDonough band headrig in excellent condition, #2 meadows hydraulic carriage, 3 saw Meadows deluxe edger (4"x36" with split carbide blades and laser lights), extended Mellot log deck with stop and load, Frick hydraulic log turner, turbocharged 471 Detroit Diesel engine, original 3 phase electric motor (came with headrig), 9 bands in good condition, many extra misc parts. Would like to sell as complete turn key operation, but will separate. Call and make offer!
Equipment Location:Spartansburg, PA
Brenner Forest Products
814-654-2222
4” X 36” Meadows Deluxe 2 Saw Edger, (1) hyd. movable saw, (1) Stationary saw, laser rack included, good condition, $6,500 – 231-832-2066
Equipment Location:Reed City, MI
County Line hardwoods
231-832-2066
Morbark 636 Debarker w/ All Electrical Included, 3 Phase, Lots of New Parts $35,000 obo 317-539-9663
Equipment Location:fillmore, IN
John Collier Logging
317-539-9663
Morbark Portable Post Peeler, 300 HP Deutz Engine, 60' Semi Trailer $25,000 obo 765-301-0274
Equipment Location:Fillmore, IN
Collier Timber Co.
765-301-0274
1992 Nicholson 104" Whole Tree Chipper, 10 Knife, Serial # N3052R 1250HP Motor with Starter and Infeed. The maximum log diameter which can be fed into the spout is 25”. The diameter of the shaft at the rear float bearing is 9-1/2". The last 12” of the shaft is tapered from 9-1/2” to 8-1/4”. Nicholson Chipper Line has been taken over by Kadant Carmanah Design.
Equipment Location:Forks, WA
LPS Equipment & Acquisition Co.
731-986-4351
35” NICHOLSON Debarker – Left Hand - $229,000.00 MODEL A-5 – S/N 6157 – Left HAND – REMOTE TOOL PRESSURE – AIR SEAL RING INCLUDES: 125 HP RING DRIVE MOTOR – 50 HP FEEDWORKS DRIVE MOTORS – OPERATORS CONTROL COUNSOL– RING AND FEEDWORKS LUBRICATION PUMPS 22” NICHOLSON Debarker – Right Hand - $129,500 22” MODEL A5 – S/N 5899 – MFG DATE 1989 – RIGHT HAND – REMOTE TOOL PRESSURE – AIR SEAL RING INCLUDES: 100 HP RING DRIVE MOTOR - 40 HP FEEDWORKS DRIVE MOTORS – SM CYCLO 11:1 REDUCER OPERATORS CONTROL COUNSOL - RING AND FEEDWORKS LUBE PUMPS. ALSO AVAILABLE IS A 22” ROTOR WITH CAPTIVE AIR SYSTEM RING HAS BEEN RE-CONDITIONED WITH NEW RING BEARING 22” NICHOLSON Debarker Left Hand - $129,500 MODEL A5B – S/N 243-7121 – MFG DATE 2000 - LEFT HAND – REMOTE TOOL PRESSURE – AIR SEAL RING INCLUDES: 100 HP RING DRIVE MOTOR - 40 HP FEEDWORKS DRIVE MOTORS - SM CYCLO 11:1 REDUCER OPERATORS CONTROL COUNSOL - RING AND FEEDWORKS LUBE PUMPS. Note: ALL PARTS THAT DID NOT HAVE A MINIMUM OF 80% SERVICE LIFE HAVE BEEN RECONDITIONED OR REPLACED
Equipment Location:Grangeville, ID
JEM Machine, Inc.
208-451-0365
RAWLINGS MANUFACTURING WASTE WOOD GRINDER. IN STOCK, MANY SIZES AVAILABLE, WEAR PARTS AVAILABLE FOR RETRO FITTING YOUR HOG. CALL 406-728-6182 FOR DETAILS.
Equipment Location:Missoula, MT
Rawlings Manufacturing, Inc.
406-728-6182