MORBIDELLI AUTHOR 504 CNC MACHINING CENTER: -- Specifications Working cap. "X" Axis 122" (3,100 mm);, "Y" axis 48.4" (1,230 mm) for routing, 40.9" (1,041 mm) for boring; "Z" axis stroke 4.5" (115 mm) max. material thickness 3.1" (80 mm). -- Positioning SpeedPositioning speed on: "X" Axis is 213 FPM (65 MPM); "Y" axis 131 FPM (40 MPM); "Z" axis is 65 FPM (20 MPM). -- Work Area:(8) Adjustable panel supports with: (4) Pneumatic lifter roller bars for heavy panels.(8) Pop up front stops; (8) pop up backstops; (2) LH pop up side stops; (2) RH pop up side stops. Each panel support with (3) vacuum cups.Worktable setup for (2) separate working areas. -- Boring Unit(1) 4 HP (3 kW) Motor with (29) Independent vertical boring spindles forming a T-configuration.(15) Independent spindles on the "X" axis and (14) independent spindles on the "Y" axis.Total of (8) horizontal spindles for boring on all (4) edges of the panel: (3 + 3) on the "X" axis & (1 + 1) on the "Y" axis. -- Machining(1) 10 HP (7.5 kW) Vertically mounted router; inverter driven at 12,000 - 18,000 RPM. -- Operator & Machine Control"ESA TRIA 7500" CNC 32-Bit Multiprocessor (100% MS/DOS compatible); 1 MB RAM, 80 MB hard disk.12" Monitor; ergonomic extended keypad with: (18) Function keys; 3-1/2" floppy disk drive; RS-232 serial port can be linked directly to IBM compatible PC.The "TRIA 7500" offers an incredible list of functions from (a) auto-diagnostic to (z) zooming.Programs can be transferred via diskette or download by wire is possible. -- Complete with:&#9679 Voltage stabilizer &#9679 (1) 100 m³/Hr vacuum pump. -- Actual model is: MORBIDELLI Author 504.

MORBIDELLI AUTHOR 600 S CNC MACHINING CENTER (W/ATC/BORING/ "C" AXIS): -- Specifications: Working capacity: "X" Axis is 114" (2,900 mm); "Y" axis 51" (1,300 mm) when routing & 39" (1,000 mm) when boring; "Z" axis stroke is 11" (280 mm); max material thickness is 7" (180 mm). -- Positioning Speed:"X" Axis 262 FPM (80 MPM); "Y" axis 131 FPM (40 MPM); "Z" axis 74 FPM (22.5 MPM); YASKAWA AC Servo motors in all (3) axes. -- Worktable:(8) Vacuum hold-down support rails; (2) adjustable vacuum pods per support; rails have pneumatic locking control; support rails slide on THK guides in the "X" axis for manual positioning.(8) Lifting bars to assist in loading/unloading heavy panels; (8) pop-up backstops; (8) pop-up front stops; (4) pop-up side stops; (2) pop-up center stops: which create (4) separate work zones (four 0/0 points). -- Boring Unit:(1) 5 HP (3 kW) Motors; variable speed from 1,000 – 4,500 RPM with HSK F 63 adaptor. (30) Independent vertical boring spindles: (16) Spindles on the “X” axis & (14) spindles in “Y” axis. (10) Horizontal spindles with: (3 + 3) in “X” axis & (1 + 1) in “Y” axis. -- Machining Units:(1) Vertically mounted 15 HP (11 kW) electro spindle router; inverter driven; variable speed from 1,000 - 18,000 RPM, with HSK F 63 adaptor(1) "C" AXIS for 360° NC controlled Horizontal processing.(1) Additional 9 HP (6.7 kW) electro-spindle router, inverter driven, variable speed from 1,000 - 18,000 RPM with HSK F 63 adaptor.(1) 10-Position Rotary Tool Changer mounted on the machine head for "on the fly" ATC.Both routers are programmable with RH & LH rotation; power & speed controlled by a KEB solid-state inverter with digital technology. -- Operator & Machine Control:PC Front-End with: MORBIDELLI "IXLOG" + "NUM CN" + Windows Operating System.15" VGA Color monitor; ergonomic keyboard & mouse; 20 GB hard drive; 56 K modem; integrated 3Com network card; 128 MB. CD ROM 24X, 3-1/2" Disk drive and (2) serial ports: RS-232 & RS-242. -- “XILOG” Interface offers:Incredible list of functions from: (a) Autodiagnostic to (z) zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC due to active tool wear using space-and-time criteria. Programs can be transferred via diskette or downloading by wire is possible. -- Additionally equipped with: On-board mini-CAD with built-in programming for: Writing circles, ellipses & angles with only a few keystrokes; on-board cycle optimization, on-board calculator; mirror-imaging and repeat imaging. All mounted in separate dust-free control cabinet. -- Complete with: (1) 100 cbm/Hr “BECKER” Vacuum Pump; auto-forced lubrication system; safety bump stops, & safety barriers. -- Actual Model is: MORBIDELLI - Author 600 S

MORBIDELLI AUTHOR 800 CNC MACHINING CENTER (W/ATC/BORING/ "C" AXIS): -- Specifications: Working Capacity: "X" Axis is 225" (6,500 mm); "Y" axis 61" (1,550 mm); "Z" axis stroke is 11" (280 mm); max. material thickness is 5.1" (130 mm). -- Positioning Speed"X" Axis 196 FPM (60 MPM); "Y" axis 131 FPM (40 MPM); "Z" axis 74 FPM (22.5 MPM); YASKAWA AC Servo motors in all (3) axes. -- Worktable:(6) Vacuum hold-down support rails; (3) vacuum pods per support; rails have pneumatic locking control; support rails slide on guides in the "X" axis for manual positioning.(6) Lifting bars to assist in loading/unloading heavy panels; (6) pop-up backstops, (2) pop-up side stops, (2) pop-up center stops. -- Boring Head:5 HP (3 kW) Motor, variable speed from 4,500 - 6,000 RPM; (18) Independent vertical boring spindles: (9) Spindles in "X" axis & (9) spindles in "Y" axis.(8) Horizontal spindles with: (2 + 2) Horizontal spindles in "X" axis & (2 + 2) in "Y" axis.(1) "X" Axis grooving saw for max. 120 mm dia. blade. -- Machining Unit(1) Vertically mounted 14 HP (8.5 kW) electrospindle router with ISO 30 adaptor; inverter driven 1,000 - 18,000 RPM.(1) NC Controlled "C" axis for 360° horizontal processing.(32) Total ATC positions with: (1) 10-Position (RAPID 10) plate type ATC with "on-the-fly" ATC + (1) 22-position ATC rack mounted at the back of the machine. -- Operator & Machine Control: PC Front-End with: "NUM 1040M" + Windows Operating System; 10" VGA color monitor, ergonomic keyboard & mouse.1.2GB Hard drive, 1.44 MB disk drive; (2) serial ports: RS-232 & RS-242; all mounted in separate dustfree control cabinet.NUM 1040-OPERATOR Interface offers incredible list of functions from: (a) Autodiagnostic to (z) zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC due to active tool wear using space-and-time criteria.Programs can be transferred via diskette or downloading by wire is possible. -- Complete with: Autotransformer; (1) 100 cbm/Hr Vacuum Pump; safety "Bump Stop". -- Actual Model is MORBIDELLI - AUTHOR 800 .

MORBIDELLI U 550 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Worktable area "X" axis 126" (3,200 mm); "Y" axis 51" (1,300 mm),;"Z" axis stroke 4.52" (115 mm); max. material thickness 3.1" (80 mm). -- Positioning Speed:"X" & "Y" Axes are192 FPM (58 MPM); "Z" axis 80 FPM (24 MPM). -- Worktable:(8) Adjustable panel supports with (3) vacuum pods per support.(8) Pneumatic backstops, (2) pneumatic side stops & (2) pneumatic center stops; (2) independent work zones. -- Boring Unit:(1) 4 HP (3 kW) - 4,000 RPM Motor; (29) independent vertical spindles at 32 mm centers with (14) vertical spindles in "X" axis & (15) vertical spindles in "Y" axis.(6) Horizontal spindles with (3 + 3) in the "X" axis. -- Machining:(2) 9 HP (6.7 kW) Routers with: ISO 30 Adaptors; variable speed from 12,000 - 18,000 RPM.(1) 5-Position tool racks mounted on the LH side of the machine base for ATC. -- Operator & Machine Control:Separate control cabinet with: "TRIA 7500" CNC 32-Bit multiprocessor (100% MS/DOS compatible), 512 KB user RAM.14" VGA Color monitor; ergonomic extended keypad with (18) function keys; 1.44 MB floppy disk drive & (2) RS 232 & (1) RS 242 serial ports. -- Complete with:(1) 100 cbm/Hr Vacuum Pump; working head safety enclosure; emergency stop rope. -- Actual Model is: MORBIDELLI - U 550.