HOUFEK 1100-RC Wide Belt Sander, (2) Head, 43" capacity: 2-Head 43" width capacity Wide Belt Sander with Drum & Combination Head.Head Configuration: -- 1st Head: 6" Dia. rubber covered contact roll with 25 HP Motor. -- 2nd Head: Combination Head, rubber covered contact roll 6" dia. with 20 HP Motor. The HOUFEK Twin Head Wide Belt Sander is intended for users who require high quality value and maximum performance. Ideal for calibration and sanding of solid wood, calibration of boards (MDF, hardboards, joint boards) and also sanding of veneered surfaces.Standard Features: Motorised rise and fall of table, complete with Automatic start switch. -- Oscillation of abrasive sanding belt controlled by infra-red eye. -- Digital display indicator for table opening position.Additional Features: -- Automatic measuring of material height. -- Dual-speed feeding of material. -- Sound proof protection. -- CE electrical and safety standards.Specifications: -- Max. operating width 1.100 mm (43") -- Operating height max./min. 160 mm - 3 mm (0.12" - 6.3") -- Sanding belt dimensions 1,120 mm x 1,900 mm (44" X 75") -- Sanding belt speed 18 m/Sec (3,550 FPM) -- Feed speed 4,5 or 9 m/Min (15 or 30 FPM) -- Main motor power (2 x 11 kW) -- Feed motor power 5.5 kW.

HOUFEK BULDOG 1100-RC Wide Belt Sander, (2) Head 2-Head, 43" width capacity Wide Belt Sander with Drum & Combination Head.Head Configuration:1st Head: 6" Dia. rubber-covered contact roll with 20 HP Motor.2nd Head: Combination Head, rubber covered contact roll 6" dia. with 15 HP Motor. The HOUFEK Twin Head Wide Belt Sander is intended for users who require high-quality value and maximum performance. Ideal for calibration and sanding of solid wood, calibration of boards (MDF, hardboards, joint boards) and also sanding of veneered surfaces.Specifications: -- Max. operating width 1.100 mm (43") -- Operating height max./min. 160 mm - 3 mm (0.12" - 6.3") -- Sanding belt dimensions 1,120 mm x 1,900 mm (44" X 75") -- Sanding belt speed 18 m/Sec (3,550 FPM) -- Feed speed 4,5 or 9 m/Min (15 or 30 FPM) -- Main motor power (2 x 11 kW) -- Feed motor power 5.5 kWEquipped with & Features: -- Motorised rise and fall of table, complete with Automatic start switch. -- Oscillation of abrasive sanding belt controlled by infra-red eye. -- Digital display indicator for table opening position. -- Automatic measuring of material height. -- Dual-speed feeding of material. -- Soundproof protection. -- CE electrical and safety standards.Note from the seller: Only selling to make room for a 3-head 53" machine. In operation using daily. Available last week of July, first week of August.

INDIANA Model 12 Edge SanderDouble Sided, Non-oscillating Edge Sander with 48" x10" platens. -- 3 HP 220/440 Volt, 3 Phase Motor -- 56" X 10-3/4" Tilting Side Tables, 27" X 18"end Table, and Hand Wheel adjustment for table height. -- 9" belt capacity.This Heavy-Duty Sander has been Cleaned and Checked, and is available for immediate delivery!

Oscillating Edge Sander: 1 1/2 HP, 6" x 89" Belt Size (In.), 4,000 SFPM Belt SFPM, CordedFor edge, face, bevel, and contour applications. Oscillating feature reduces heat build-up. Quick-release lever and control dial help track and replace belts. Cast-iron table moves up or down.Specifications: 1-1/2 HP, Hz60, Amps AC18/9, Belt Size 6" x 89", Belt SFPM 4,000, Table Work Surface 32" x 7", Dust Collection Port Size 4" Features: -- 4 in Dust Port Hooks Up to Your Dust Collection System for Efficient Dust Removal, adjustable outer drum, support table enables contour sanding. -- Cast Iron table moves up or down to provide exact work piece positioning, Graphite covered Platen runs cooler increasing machine and belt life. -- Oscillating feature reduces heat build up on sanding belt, Quick Release Lever and Tracking Control Dial are conveniently located for replacing and tracking belts, Tilting Sanding Head for sanding bevels.

JET EHVS-80 6"; x 89" Non-Oscillating Horizontal/Vertical Edge SanderSpecifications: -- Table size 12-1/2"; x 37"; x 3/4"; Thick, Table tilt 0° - 90°. -- Platen size 7" x 34". -- Belt speed 3,900 SFPM.Equipped with: -- 6" x 89" Abrasive belt. -- 1-1/2 HP 3,600 RPM Direct drive motor.Palletized Dimensions: 50" x 31" x 44" H.

JET EHVS-80 EDGE SANDER (NON-OSCILLATING)(Single-Phase) ---Price Negotiable---Make an Offer!--- - 6” x 89" Non-Oscillating Horizontal/Vertical Edge Sander - Table size 12-1/2” x 37” x 3/4” Thick, Table tilt 0° - 90° - Platen size 7" x 34" - Belt speed 3,900 SFPM - 6" x 89" Abrasive belt - 1-1/2 HP 3,600 RPM Direct drive motor - Palletized Dimensions: 50" x 31" x 44" H

KIMWOOD Smithway 6-head top and bottom Sander5 Ft. wide sander with 62-inch maximum panel width capacity. -- 1st top and bottom heads opposed contact drums with 13.5" diameter steel drums driven by 150 HP direct drives. -- 2nd top and bottom heads are offset opposed contact drums with 13.5" diameter steel drums driven by 125 HP direct drives. -- 3rd top and bottom heads are offset opposed combination contact roll and smoothing platen heads driven by 100 HP direct drives and "billy roll" backup. -- Final cleaning brushes top and bottom with 1 HP belt drive. -- Panel flow is left to right, with constant pass line height of 50 inches. -- Exhaust: 60,000 CFM at 8" static pressure. --Weight with motors: 78,000 lbs. Length: 288 inches.

The K14 Series system is a small, heavy-duty, bench-top, barrel tumbler with standard capacities ranging from 0.75 - 1.5 cubic feet. -- The K14 system is a deburring machine solution that features a timer, variable speed, a heavy chain drive, and removable, interchangeable barrels. -- The barrels are mounted high enought to allow a screen and pan underneath so the barrel can be emptied without lifting and dumping. -- This deburring turn-key machine can handle loads of up to 200 Lbs. The barrels are mounted in a cradle and can be interchanged to divide up the load. -- (1) Steel barrel lined with a durable Polyurethane lining; 14" diameter across corners by 22-1/2" wide; Quick action lock on covers, solid, watertight doors. -- Variable speed control 25 - 50 RPM; 24-Hour timer; Start-stop switch. -- Complete bench-top unit dimensions are 44-1/2" W x 25" D x 24" H.

KRAMER K2024-1U -- K20 Series system is a heavy-duty barrel tumbler with standard capacity of 4.80 cubic feet. -- K20 system is a deburring machine solution that features a timer, variable speed, a heavy chain drive, and removable, interchangeable barrels. -- This deburring turn-key machine can configured to handle (1) to multiple barrels at a time. The barrels are mounted in a cradle and can be interchanged to divide up the load. -- Includes (1) Unlined barrel -- Variable speed control 25 - 50 RPM; 24-Hour timer; Start-stop switch. -- Complete unit dimensions are 58" W x 32" D x 50" H.

Single belt oscillating "Tiltable Bed" 0° - 90° sander, 3 HP main motor, 3,400 RPM, belt size 6" x 89", 30.5" long platen. -- Max sanding length 30.5", 4" vertical adjustment of front table, 36" table height, oscillating rate of 121 times/min. -- Includes: (4) interchangable spindles, sizes are 1.25" - 1.5" - 2" & 2.5" dia.

Oscillating Edge Sander with end sanding kit. -- 6" Wide x 89" long abrasive belt. -- Tilting 6" x 24" platen. -- 3 HP, single or 3-Phase motor w/emergency switch. -- 6" Diameter drive pulley. -- 8" x 24" Front table with a 4" vertical adjustment and miter gauge. -- End table for radius work. -- Heavy tables, fabricated steel base and dust hood. -- 3-Phase unit model # is SK-3000SDN3.

LAGUNA PRO 37 WIDE BELT SANDER1-Head, 36" width cap. - Combination sanding head with 4" dia. rubberized contact roll & 3" wide "dual action" polishing platen.Equipped with: -- Abrasive belt size 37" x 75" -- Pneumatic abrasive belt tensioning. -- Electronic abrasive belt tracking. -- 20 HP main drive motor. -- 1HP Variable feed speed motor for 12 - 60 FPM. -- 1/4 HP Conveyor bed elevation motor, with digital programmable thickness set up and AUTO-SIZE thickness system as well. -- Infeed & outfeed rubber covered holddown rolls. -- 0" - 5-1/2" thickness capacity.Complete with: -- Air-operated disc brakes on sanding head, emergency stop button

Single head; 1 HP Belt drive motor, Fixed spindle, Mechanical controlled variable speed from 700 - 1,700 RPM, 4" vertical spindle adjustment. -- Features: 27" x 25" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust port, large hand wheels for easy spindle adjustment.

LARICK 120 Single Spindle Profile Sander;Sands raised panels, and door edges.Specifications: -- 1" Dia. x 4" long belt driven arbor; 700 - 1700 RPM variable speed, 1 HP motor. Arbor is vertically adjustable. -- Complete with: 25" x 22" butcherblock maple table, enclosed fabricated steel base and large hand wheels for easy spindle adjustment. -- Includes: Sensing safety guard for anti-automatic restart protection.

Single head; 1.5 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, inverter controlled variable speed from 400 - 1,800 RPM, RPM display; 4" vertical & horizontal spindle adjustment. -- Features: 36" x 33" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust hood w/piano hinge for easy ascess to sanding disc, stationary fence, large hand wheels for easy spindle adjustment.

LARICK 360 V Profile SanderSpecifications: -- Single head; 2 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, variable speed from 400 - 1,800 RPM; 4" vertical & horizontal spindle adjustment. -- Features: -- 36" x 33" Solid wood tabletop, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARICK profile discs made to customer specifications. -- Complete with: -- Enclosed fabricated steel base, dust hood w/piano hinge for easy access to sanding disc, stationary fence, and large hand wheels for easy spindle adjustment.

Single head; 1.5 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, inverter controlled variable speed from 400 - 1,800 RPM, RPM display; 4" vertical & horizontal spindle adjustment. -- Features: 36" x 33" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust hood w/piano hinge for easy ascess to sanding disc, stationary fence, large hand wheels for easy spindle adjustment.

6" Wide x 108" long belt with 3/4 oscillation stroke, 3 HP motor (with 3600 FPM belt speed), 40" x 12" table tilts 45ø, fence tilts 45ø, single 5" dust port. -- Machine Dimensions: 58" (L) x 22" ( W) x 47" (H), net weight is 350 lbs.

Heat treated and dynamically balanced 18" aluminum disc. -- Commercial duty 1.5 HP direct drive motor. -- Heavy cast iron 10-1/2" x 24" table w/miter gauge slot. -- Easy precise tilting of the work table with 45° forward and 30° back. -- Rack and pinion adjustment of the table rise & fall and manual tilting of the table. -- Sanding station is mounted to a heavy column. -- Heavy bolt-down cast iron base. -- Optional: Upgrade to a 2 HP motor add.....$240, Miter gauge add.....$270, Rack and pinion movement of the tilt add....$400, Single Phase 1.5 HP motor add.....$120.

MAX 36-SD Double Disc SanderHeat treated and dynamically balanced 36" aluminum disc. -- Commercial duty 5 HP motor base mounted with multiple drive belts. -- Heavy cast iron 16" x 46" table w/miter gauge slot. -- Easy precise tilting of the work table with 45° forward and 30° back. -- Rack and pinion adjustment of the table rise & fall and rack and pinion tilting of the table. -- Sanding station is mounted to (4) 3-1/2" heavy columns. -- Heavy bolt-down cast iron base.