GUIDETTI - WIRE 415, ...Copper & Wire Chopper with Pre-Shredder -- Currently Disassembled.Specifications: -- Feed size of material; 1,310 x 2,140 mm. -- Load pusher stroke: 600 mm. -- Rotor diameter: 220 mm. -- Rotor rotation speed: 82 RPM. -- Hydraulic power: 0.75 kW. -- Grid hole diameter: 40 mm. -- Rotating blades: 23 + 4 External. -- Low hours; 2,300 Hrs.GUIDETTI Pre-Shredder New in 2012. -- Model: PM6N 600/200 -- Low hours: 1,700 -- Loaded onto your truck.

MAX-PAK - HOE-2850-308AR, ...Horizontal Open-End Auto-Tie BalerSpecifications: -- Bale size: 30″ x 42″ x 72″ (variable) -- Bale weight: Up to 1,400 Lbs -- Cycle time: 15.23 Seconds -- Motor: 30 HP -- Cylinder bore: 8″ -- Rod: 5-1/2″ -- Stroke: 70" -- System pressure: 3,000 PSI -- Platen force: 143,256 Lbs - 120.49 PSIFeatures: -- Automatic Wire Tie System -- Heavy wall tubular steel frame -- AR 400 floor and platen -- Hydraulic regenerative circuit and air/oil cooler -- NEMA 12 Electrical panel and Control System -- Conforms to: OSHA &ANSI Z245.5 Standards

MAXIFLOW by AQC V3-6MCH3-36 CARTRIDGE Filter Dust Collector. -- Specifications: 16,000 CFM approx. Filter Cartridge System complete with (36) cylindrical cartridges (130 sq. ft. cloth area per cylindrical cartridge - 13.84"OD x 9.47" ID x 26" long.) for a total 4,680 sq..ft. of filter area; operating at 3.4:1 air-to-cloth ratio. -- Cartridge Specs: SB-820, 100% Polyester Spun-bolded, 8.0 oz/sq. yds. Air permeability 20 -30 cfm/sq. ft. @ 0.5" WG. 200°F continuous operating temperature. -- Comes with: Automatic continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges; Sequencing Timer in an enclosure. -- Construction: 11 gage fully welded construction. 1/4" thick plate Tube Sheet. (3) V-shape 66" hoppers under filter housing. Heavy Duty steel legs to position unit approximately 43"' above the ground, providing sufficient clearance for (3) 55 Gal. drums.. Housing rated for +/- 20 " WG. Includes 92) 20" dia. top inlet pipe. -- Equipped with: TWIN CITY Fan, approx. 26" inlet belt driven by a 40 HP , 1800 RPM, TEFC Fan generates 16,000 CFM at 9" WG. Ground-mounted fan/motor. -- Features: ABB 'HVAC' series VFD (Variable Frequency Drive) for variable speed of motor to conveniently control desired CFM.. AfterFilter section with HEPA filters for return air into building with (4) grille sections. -- Services Required: 110V 50-60 Hz; air supply of 12 CFM @ 90 - 100 PSI. Pulses every 10 sec. -- Overall filter dimensions/Weight: 86" wide x 132" long x 160" ht. (156.5" + inlet flange); 6,500 Lbs. -- Seismic rating zone 4, Wind resistance 160 KPH (100 MPH). -- Unit available Oct 1, 2023.

MAYFRAN - 70, ...Steel Belt Infeed Conveyor -- Steel Belt Conveyor: 70" Wide -- Motor: 5 HP -- Lower Pit: 6 Feet -- Incline:17 Feet -- Upper: 6 Feet -- Head Pulley to Floor: 135" -- Loaded onto your Truck

MCDONOUGH Bandmill 62″ Bottom Wheel.

MEADOWS MILLS 2 STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 4 STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 2 STRAND DEBARKER STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Debarker style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 36 DELUXE STATIONARY BOARD EDGER -- Handset board edger, all mechanical functions, and fixed feed speed -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 14 feet, bay is 36"; wide -- Four live bottom feed rolls and two overhead gravity pressure rolls -- Unison shifting saw collars, each with a 16"; diameter split carbide saw -- 30 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed table with dead rolls -- Tailing device up to 16' long added to outfeed -- Laser lights aligned with each saw

MEADOWS MILLS 100H CHAIN LOG TURNER -- Hydraulic Cylinders: One 2" x 12" with 1 1/2" rod -- Turning Chain: #100 chain with 3/4" dog width and 13 bits -- Drive: H60TB13 sprocket with bushing, H60SDS25 sprocket with bushing, #60 drive chain, and chain guard -- Drive Shaft: 1 11/16" diameter 1018 cold roll -- Idler Shaft: 1 11/16" diameter 1018 cold roll -- Frame: Base constructed from 3" x 4" tubing, uprights constructed from 8" channel and 4" channel, head frame constructed from 3" x 4" x 3/8" angle and various flat bar -- Drive Motor: Charlyn 103-1032 hydraulic motor (or equivalent motor from alternate manufacturer) -- Hydraulic Requirements: 10 gpm & 950 psi -- Controls: not included in base price

MEADOWS MILLS 120H Chain Log TurnerSpecifications: -- Hydraulic Cylinders: Two 2" x 12" with 1-1/2" diameter rod -- Turning Chain: #120 chain with 1" dog width and 13 bits -- Drive: H80TB13 sprocket with bushing, 80Q25 sprocket with bushing, #80 drive chain, and chain guard -- Drive Shaft: 2-3/16" diameter 1018 cold roll -- Idler Shaft: 2-3/16" diameter 1018 cold roll. Construction: -- Frame: Base constructed from 10" x 25.4 Lbs beam, feet constructed from 4" x 6" tubing, head frame: Constructed from 8" x 3" x 4" tubing -- Drive Motor: Charlyn 104-1253 hydraulic motor (or equivalent motor from alternate manufacturer) -- Hydraulic Requirements: 12 GPM & 950 PSI -- Controls: not included in the base price

MEADOWS MILLS 3 STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 3 STRAND DEBARKER STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Debarker style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS #1 Automatic Sawmill;Complete with the following components and features: -- 15' Long 4 HB Carriage. -- Operator’s Cab, . -- Drive & Turner. -- Computer Setworks. -- YAMANI 4" Band Headrig. -- MEADOWS Titan 4" combo Edger also new in 2001; -- 30' x 24" Live Rolls. -- Electrical Switchgear. -- 33" Dia max. log. -- Capacity: 6,000 to 8,000 BF per day.NOTES: &#9679 Can be seen in operation.

MEADOWS MILLS 36 DELUXE STATIONARY BOARD EDGER -- Hydraulic board edger, all push button functions, and variable feed speed with flow control -- Complete hydraulic power source belt driven from mandrel of edger, includes oil tank and oil cooler -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 20 feet, bay is 36"; wide -- Four live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one shifting saw collar, each with a 16"; diameter split carbide saw -- 60 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed table and outfeed tables with dead rolls -- Laser lights aligned with each saw

MEADOWS MILLS 36 DELUXE STATIONARY BOARD EDGER -- Handset board edger, all mechanical functions, and fixed feed speed -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 20 feet, bay is 36"; wide -- Four live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one shifting saw collar, each with a 16"; diameter split carbide saw -- 30 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls -- Laser lights aligned with each saw

Mereen-Johnson 424 DCS Short Stock Gang Rip sawSpecifications -- 24" Arbor cap., -- 14" max. dia. tooling, -- 3-1/2" max. manual thickness adjustment, -- 14" min. length for glue joint accuracy and 22" min. for busting only, -- 6" throat. Equipped with and Features -- 75 HP - 3,600 RPM TEFC Direct drive motor, -- 2-3/16" dia. arbor with disc brake, -- load meter and slip-off outboard bearing. -- Feed & chain: 3 HP Variable feed speed 30 to 170 FPM, -- M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain -- "Quad Life" hardened dip cams -- Extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips --, Automatic chain oiler. -- (4) 3" Dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, -- Pressure rolls and bed plate unit with scale & pointer thickness reference; -- Anti-kickback finger system with (1) lower & (2) upper on infeed. -- Sound enclosure, -- (2) Upper dust hoods (1) 10" & (1) 5" dia. and (1) lower 4" dia. hood, -- Requires 3,820 CFM;NOTE: Laser Rack with 10 Lasers

MEREEN-JOHNSON - 431DC, ...Gang Rip Saw: Specifications: -- 31" Arbor width cap., 14" max. dia. tooling, 3-1/2" max thickness. -- Motorized thickness adjustment. -- 29" Min. length for glue joint accuracy and 22" min. for busting only; 6" throat. -- 75 HP - 3,600 RPM TEFC direct drive motor. -- Arbor with disc brake & load meter. -- Arbor lockout on the access door.Equipped with & Features: -- Feed, Chain & Holddown. -- 5 HP Variable feed speed 30 - 150 FPM with adjustable jam protection. -- MEREEN-JOHNSON "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain. --"Quad Life" hardened dip cams. -- Extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips. -- Automatic chain oiler with low-level shutoff. -- (4) 3" Dia. air loaded overhead pressure rolls. -- Full width spring loaded overhead bed plate. -- Pressure rolls & bed plate unit with powered adjustment; scale & pointer for thickness reference; -- Antikickback Finger System with: (1) Lower & (2) Upper on Infeed; (1) upper assembly on outfeed.

Mereen-Johnson Model 524-DDCSR 2+4 Double Arbor Gang Rip SawSPECIFICATIONS -- First Arbor Arranged with Two (2) Independently Adjustable Select Saw Assemblies for Mounting Hogging Blades -- Second Arbor with Four (4) Independently Adjustable Select Saw Assemblies -- Arbor Space 24" -- Thickness Capacity to 1-3/4" with 12" Tooling and 2-3/4" Using 14" Tooling -- Minimum Length 30"Equipped with & Features -- Two (2) M-J Direct Drive Motors 75HP Each -- Feed Motor 7.5HP TEFC, 30' to 235' rate with Frequency Inverter Speed Control -- Saw Set Up for Second Party Optimizing System -- NEW IN 2016

MEREEN-JOHNSON - 431DC, ...Gang Rip Saw: Specifications: -- 31" Arbor width cap., 14" max. dia. tooling, 3-1/2" max thickness. -- Motorized thickness adjustment. -- 29" Min. length for glue joint accuracy and 22" min. for busting only; 6" throat. -- 75 HP - 3,600 RPM TEFC direct drive motor. -- Arbor with disc brake & load meter. -- Arbor lockout on the access door.Equipped with & Features: -- Feed, Chain & Holddown. -- 5 HP Variable feed speed 30 - 150 FPM with adjustable jam protection. -- MEREEN-JOHNSON "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain. --"Quad Life" hardened dip cams. -- Extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips. -- Automatic chain oiler with low-level shutoff. -- (4) 3" Dia. air loaded overhead pressure rolls. -- Full width spring loaded overhead bed plate. -- Pressure rolls & bed plate unit with powered adjustment; scale & pointer for thickness reference; -- Antikickback Finger System with: (1) Lower & (2) Upper on Infeed; (1) upper assembly on outfeed.