HARRIS GRIZZLY 240-T100-11/9 2-Ram Horizontal Baler with Conveyor72" Incline Conveyor on this Baler; only (2) years old!Specifications: -- Cylinder: 9" -- (2) Main motors: 100 HP -- System pressure: 5,000 PSI -- Main ram face pressure: 283 PSI -- Ejector ram face pressure: 202 PSIEquipped with: -- Operator control station with PLC control -- 72" Green Machine steel belt infeed conveyor -- L & P Pinnacle Tier

HARRIS - CENTURION EHD, ...Horizontal Baler -- Bale Separation Door -- Hours: 23,269 ( at time of reading) -- Motors: 200 HP (2 x 100 HP) -- Bale Size: 45" x 30" x 63" -- Hopper Opening: 86" x 105" -- Upgraded Pumps to New Oil Gear 2020 -- New Remanufactured Cylinder 2021 -- Accent Wire Tier 340 -- Came out of Production: November 2022 -- Conveyor NOT Included -- Loaded onto your Truck!

HARRIS - CENTURION, ...Horizontal BalerSpecifications: --Motor: 150HP --System Pressure: 3,500psi --Main Ram Face Pressure: 280psi --Ejector Ram Face Pressure: 209psi --Bale Size: 45" x 31" x 64" --Hopper Opening: 86" x 114.5' --Charge Box Opening: 57.5" x 105.5" --Comes equipped with a L&P Wire Tier. --Feed Conveyor priced on request (not included)

HARRIS-SELCO " HLO-608AR50" OPEN END AUTO-TIE HORIZONTAL BALER -- 50 HP motor -- 8" Cylinder with 80" stroke -- Infeed opening 45" x 60" -- Bale size 48" x 40" x variable -- Bale weight up to 1,800 lbs (OCC) -- Production capacity up to 6 tph -- Shear blade -- Platen force 113,100 lbs -- Completely refurbished --Warranty 180 Day - Parts/Labor Warranty -- Loaded on your truck

HARRIS SELCO HSO-127A30 AUTO-TIE Horizontal BalerSpecifications: -- Cylinder: 7" -- Charge box opening: 36" x 28" -- Bale size: 30" x 40" x Variable -- Main motor: 30 HP -- Cycle time: 17 sec (no load) -- Platen force: 86,590 LbsEquipped with: -- Operator control panel -- Bale cutting shear

HARRIS/SELCO HLO-60AREB HORIZONTAL AUTO-TIE BALER --Motor: 2 – 100 HP --Cylinder: Rebuilt 12″ --Hopper: 80″ Long --Hours of Operation: 14,000 --Tons Per Hour/OCC: Up to 26 Tons --Includes 72″ Mayfran Steel Belt Feed Conveyor

Selco HSO-170AR30 Auto TIre Baler• 20 HP Motor• 7"; Main Cylinder• Bale Size: 30"; x 36"; x (variable)• Cycle Time (No Load): 23 seconds• Main Ram Face Pressure: 74psi• System Pressure: 2,250psi• Total Compression Force: 86,590 lbs

HENDRICK - PRO V, ...Dust CollectorSpecifications: -- 5 HP - 2,500 CFM. -- (2) High Efficiency 1/8" thick needle felt cloth bags up and (2) collection barrels down -- Complete with: Direct drive centrifugal fan assembly with 5 HP TEFC motor non-sparking Heavy-Duty cast aluminum impeller; (4) inlets, and motor starter.

HMC - Separator, ...Eddy Current Multi-Separation SystemSpecifications: -- Countering conveyor: 55" x 10". -- Bucket Elevator: 10" x 5'. -- Main motor: 0.37 kW.Equipped with: -- Push button control. -- Carrier with skates.

HMC 2-Saw Trimmer Model ET-10,;Complete with the following features: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.

HOLYTEK HP-11P Horizontal Resaw -- Hydraulic Feeding conveyor, hydraulic pump with 3 HP motor -- Main saw motor 20 hp. Specifications: -- Working width capacity 12“ (300 mm) -- Variable Feed Speed 0- 17 m/min (0 to 55 FPM) -- Thickness capacity 4mm to 125 mm (.11/8" to 4.92") -- Conveyor tilting 0 ° to 7° -- Electroni display of cutting height -- Blade Capacity 4270 X 25 X 0.89 mm. -- Wheels Diameter 725 mm -- Return conveyor on machine top

HURST 600 HP Waste Fired Boiler; -- Specifications:Complete in-place system with the following features: -- Decommissioned July 2019. -- 150 PSI. (300 PSI max wp), -- 20,700 Lbs per hour. -- Fuel House, Boiler Building and all Controls -- System has been "pickled" to maintain tube integrity.

HUSTLER - FC-2, ...ScreenSpecifications: -- OD at the longest point: 104" -- Long at longest point: 122" -- Tall at the tallest point: 65"Equipped with: -- (2) Shutoff switches

HUSTLER - 48", ...Inclined Infeed Cleated ConveyorThis Conveyor is "New, Never Used," and stored outside. Specifications: -- Width: 48 In. -- Horizontal load area: 8 Ft. -- Inclined height: 21-1/2 Ft. -- Total length: 31-2/3 Ft. -- Main motor: 5 HPEquipped with: -- Oiler -- Cleated

IBC TR-13-150 2-Ram Horizontal BalerSpecifications: -- Main Bore: 13" -- Eject Cylinder: 9" -- Horsepower: (2) 75 HP Each -- Feed Opening: 58" x 88"

INGERSOLL RAND SSR-EP30SE Rotary Screw CompressorSpecifications: -- 30 HP Motor, approx. 120 CFM @ 125 PSI, totally integrated package, single stage rotary screw air end, max. modulate pressure 128 PSI; full sound enclosure keeps noise levels below 75 dBA.Features: -- "Intellisys" Microprocessor based control system, premium instrument panel, air-to-air 2-stage after-cooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter.Control system includes: -- Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns.(23,069) Total operating hours.

INGERSOLL RAND - RS30IE-A125, ...40 HP Screw Compressor40 HP Motor, 196 CFM @ 115 PSI; totally integrated package.Specifications: Single-stage rotary screw air-end; max. modulate pressure 118 PSI; full sound enclosure keeps noise levels below (75) dBA. -- Equipped with: -- Microprocessor based control system, premium instrument panel, air-to-air 2-stage aftercooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter. -- Control System: -- Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns. Approx. (23,000) Total operating hours.

INGERSOLL-RAND UP6-15C-125 15 HP Single-Stage Horizontal Tank-Mounted Rotary Screw Air Compressor, with 2,313 Hrs. (as of 2/16/24)Specifications: -- Cap. 55 CFM, Max. pressure 125 PSI. -- Pump speed 6,250 RPM. -- Sound level 69 dBA. Equipped with: -- High efficiency close coupled air end. -- Motor shaft-mounted centrifugal blower. -- Electronic stepper motor inlet air control. -- 2-Stage Air-cooled aftercooler. -- Total positive lubrication system, with Spin-on filter. -- Compartmentalized sound enclosure.Complete with: -- 80 Gallon Cap. 24"; Dia. x 33"; L Horizontal Air Receiving Tank.

INGERSOLL RAND - UP6-15C-150, ...ROTARY SCREW AIR COMPRESSOR & Horizontal TankSpecifications: -- 15 HP Motor, 55 CFM @ 125 PSI; totally integrated package, single-stage rotary screw air-end; max. modulate pressure 125 PSI. -- Full sound enclosure keeps noise levels below 75 dBA. Standard Features Include: -- Instrument panel, air-to-air 2-stage aftercooler, electronic stepper motor inlet air control. -- Sealed SSR direct drive gear train; total positive lubrication system with spin-on filter. -- Mounted on horizontal tank.. (28,000) Total operating hours.

INOTECH 200 HP DUAL BOX SHAVING MILLSpecifications for one system: -- (2) 100 HP Motors -- (2) Boxes 48" x 106" -- (2) Cutter Heads 48" Long with 10 Knives Each -- (2) Slide Out Modules for Maintenance of Knives Cutter Head -- Production Capacity up to 2,000 cu./ft. per hour -- In a Very Good Working Condition -- Loaded on your Truck(2) Complete Systems Available.Price is for one Unit unless otherwise stated.