INVICTA RT-40 14" Table SawSpecifications: -- 14" Blade dia., 7.5 HP motor belt drives arbor at 3,500 RPM, 1" dia. right hand tilting arbor 0° - 45°; 4-1/2" max. depth @ 90°, 54" rip cap. to the right of blade. -- Front edge of saw to front of blade 16-1/2"; 59" x 43-5/16" precision ground cast iron table w/miter slots on either side of the blade, 33-1/2" table height. -- Equipped with: -- "Cam-lock" Fence system; magnetic push button starter.

IPS - CD-751, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 42" x 42" -- Main cylinder: 7" Bore -- Door cylinder: 4" Bore -- Main motor: 30 HP -- Charge hopper height: 90" -- Hopper opening: 40" x 50" -- Bale weight: Up to 1,700 Lbs -- Total force:115,400 Lbs -- Ram face pressure: 65 PSIFeatures: -- AR400 Alloy steel shear blade -- Steel floor with replaceable bearing strips -- 24 Volt control circuits -- Welded Frame, heavy reinforced channel & plate

IPS - AT-752-20, ...Horizontal Auto-Tie BalerReconditioned Baler ready to handle your recycling needs! Specifications: -- Main cylinder: 7″ -- Tension cylinder: 6″ -- Bale size: 43″ x 43″ x Variable -- Charge box opening: 41″ x 50″ -- Total force: 115,400 Lbs -- Motor: 20 HP -- System pressure: 3,000 PSI -- Ram Face pressure: 63 PSI -- Oil reservoir: 125 Gallons

IPS - AT-752-50, ...Horizontal Auto-Tie BalerSpecifications: -- Charge box opening: 41" x 50" -- Main cylinder bore: 7" -- System pressure: 3,000 PSI -- Total force: 115,400 Lbs -- Ram face pressure: 63 PSI -- Tension cylinder bore: 6" -- Main motor: 50 HP -- Bale size: 43 x 43" x Variable length -- Bale weight: Up to 1,525 Lbs -- Bale volume: 66 Cu/Ft -- Cycle time: 20 SecFeatures: -- Hopper access door with safety interlock -- Oil Cooler

IPS - AT-872-50, ...Horizontal Open-End BalerSpecifications: -- Auto-Tie Model• 50 HP Motor• 8"; Main Cylinder• Hopper Opening: 46";x 60";• Bale Size: 43"; x 48"; x (variable)• Main Ram Face Pressure: 74psi• System Pressure: 3,000psi• Total Compression Force: 150,800 lbs

IPS - AT-874-100, ...Auto-Tie Horizontal BalerSpecifications: -- Main Cylinder: 8"; Bore -- Bale size: 43" x 43" x variable -- Main motor: 100 HP -- Production capacity: up to 11 TPH (OCC) -- Bale tension cylinder: 6" -- Bale weight OCC: Up to 1,580 Lbs -- Conditioned news: Up to 1,775 Lbs -- Cycle time: 15 Sec -- Oil Reservoir Capacity: (400) gallons -- System Pressure: 3,000 PSI -- Platen Force: 150,700 lbs. -- Ram Face Pressure: 83 PSIEquipped with: -- Programmable PLC controls -- 0 - 15 Sec adjustable time delay -- Precompression lid

IPS - AT-965-HS100s, ...Horizontal Open-End BalerSpecifications: -- Auto-Tie Model -- Motor: 100 HP -- Ram cylinder: 9" -- Push cylinder: 7" -- Ram force: 190,800 Lbs -- Feed opening: 54" x 60" -- Hinge side -- This Baler is a high-speed Auto-Tie with a Hinge Side (large feed hopper for large material 66" x 60"), multi-material Baler. High grade 25 TPH, OCC 15 TPH, aluminum cans 7 tph, HDPE 4.7 tph, PET 4.2 TPH, tin 25 TPH. -- Automatic operation has a 1,000 Lbs baling Wire System for higher production and longer operating systems before you have to change wire.Conveyor NOT included.

MOLDOW Style, by ' NEU-JKF', Modular Baghouse with chain-sweep bottom feeding into a Rotary Air Lock (RAL) at the end of filter bank. -- General Data: Approx 35,600 CFM running at a 5:1 Air-to-Cloth Ratio. Total of 7,125 sq. ft. of filter area comprised of (14) modules each containing (27) filter bags. Filter bags are 8.5" dia. by approx. 96" long. All modules including inlets are fitted with filter bags. -- Main fans: Total of (3) Material Handling (MH)fans. (2) NORTHERN BLOWER Size 23, Des 5691, CL 3 Fans each belt driven by 60 HP TEFC motor. Fan inlets supplied by 26" dia. pipes. (1) type JK 25 HP MH blower. -- Filter Cleaning: Each module is supplied with a 2 HP approx. regenerative high pressure fans to sequentially back-flush the dust from the bags during operation and thereby falling into the continuous hopper with a drag-chain-sweep mechanism that rides along the bottom of hopper and feeds into the RAL. -- Return Air: All modules are ducted into one return air manifold pipe. -- Electrical Controls: CONQUEST free standing electrical control panel with visual light indicators for monitoring system status. Panel contains all start/stop pushbuttons and selector switches, and main disconnect. -- Includes: Steel Support frame with a walkway to the access doors which can act as explosion vents. Full set of polyester filter bags. -- Inquire for a cost for professional dismantling and transportation.

MOLDOW 184 MXN-324 Expandable Baghouse - 18 Total Modules with (4) Inlet Sections. Specifications. -- 72,000 CFM modular/expandable unit, currently with (14) Filter sections @ 5,000 CFM per section (24 bags per section). -- Approx 336 filter (8.6" dia. by 120" long) , 9,300 sq. ft. of total filter media, 7.75:1 air to cloth ratio Shell is under negative pressure allowing a high efficiency clean air fan.. -- Main Fan: Air Handling IAP A600 SWSI, Class IV, S/N 26862-1 rated at 90,000 CFM @ 1321 RPM, 16.0/20.3" SP & 290/308 BHP. Fan is A - Airfoil type wheel & is non-overloading powered by MARATHON "445Ta" belt driven TEFC 300 HP motor.. Currently fan inlet is connected with a 30" pipe. Regenerative Filter Cleaning: -- Each row of filter bags is cleaned continuously during operation by use of a regeneration carriage/trolley rides along top of filter bank) with a 4 KW (5.3 HP) high-pressure fan that sends air from the clean-air chamber back through the filter bags using nozzle pipes.Bags are fitted with an inner spring bracing. Special bag design reduces air velocity which increases air and dust loading considerably. -- Equipped with: Built-in bottom drag link chain which brings dust to one end where it is discharged through approx. 9" x 30" Rotary Air Lock (RAL). Currently a transfer fan moves dust to storage bin.. Summer/Winter Diverter/Abort Gate connected on outlet/return air line.Comes with: -- Relay Fan, IAP 911 RBO, to pneumatically convey collected dust at discharge of RAL. -- Platform with safety railings and ladder to access regeneration cabinet (return air plenum). -- Interior electrical control panel, support frame, and exterior ductwork. Single heavy sheet metal flanged rectangular return air pipe. Overall Dimensions: -- 45' Long by 12'-9" wide by 28.5' high (5.5' hopper to ground, 8' high hopper and 15' top section). -- Professional dismantling, rigging, transport and installation is available upon request.

MONTGOMERY 10 MAX Hammermill, Hog, Grinder, and Blower;Specifications: -- 10" Inlet; 40 HP; 3-Ph; Dual voltage (230/460) Reliance motor; -- (3) Sets of bolt down slot-style hammer teeth in varying conditions. -- 8" Blower outlet. Has 1" screen.

MORGAN "3-Head" Multi Blade trim saw: -- Equiped with:(3) 10 HP motors, 10'capacity 5'6" thick with Disconnects & Controls

MOSCA RO-MF-4-125/155 49" W x 61" H Bottom Seal Semi-Automatic Strapping Machine, with Very Low Usage!Specifications: -- Conveyor line space: Approx. 20". -- Table height 16" - 20". -- Strapping speed: Approx. 30 Straps/Min. -- Strap widths: 5 mm (0.20"), 6 mm (0.24"), 8 mm (0.31"), 9 mm (0.35"), & 12 mm (0.47"). -- Max. infinitely adjustable strap tension 80 Lbs. -- Strap material: Machine grade polypropylene.Equipped with: -- Fully-enclosed one-piece strap track, with 4-Point Cam-actuated opening. -- Automatic strap feeding. -- Electronic strap tensioning, with DC Motor. -- Electronic temperature-controlled heat-seal strap seal. -- Automatic strap loop ejection. -- Automatic coil-end detection & Ejection. -- Cycle counter. -- (3) Swivel locking casters.

MOSLEY HARRIS Series AP 16/13 2-Ram Horizontal BalerSpecifications: -- Main cylinder: 16" -- Eject cylinder: 13" -- Main motors: (2) 100 HP -- Feed opening: 86" x 20"Equipped with: -- Liner Plates are roughly appx. 50% and evenly worn floor. -- Strapper is a 330 Model, but still works very well. -- Baler has been used primarily for OCC and ONP.

MOSLEY - HBLA111-200S-4-AP-12/9-BRD, ...2-Ram Horizontal BalerSpecifications: -- Main motor: 200 HP -- Feed opening: 60" x 120" -- Bale size: 31" 62" x 44" -- Production capacity: 24 TPH OCC -- Main cylinder: 12" -- Eject cylinder: 9" -- Platen force: 98 tons -- Ram face pressure: 227.5 PSI -- OCC weight: 1,400 Lbs -- Non-ferrous: 1,600 Lbs -- Solid waste: 2,300 Lbs -- Plastic: 1,500 LbsEquipped with: -- Shear blade -- Wire Tier -- Photo-eye -- Release door

MSI 330-F-2 Auto-Tie Horizontal BalerSpecifications: -- Motors: (2) 20 HP. -- Cylinder: 7". -- Feed Opening: 30" x 30". -- Bale Size: 30" x 40" x Variable.Equipped with: -- Oil Cooler. -- Shear Bar. -- Bale Dog. -- PLC: ALLEN-BRADLEY.

MTS 15 HP Baghouse Dust Collector w/ Pulse Jet CleaningMTS filter housings are made from heavy-duty steel material. A downward air stream in the pre-separator chamber separates coarse-particles before they reach the filter area. The fine dust is then filtered out to and efficiency of more than 99.9%.Specifications: -- Top mounted 15 HP motor. -- Total number of filter bags - 32. -- 5,700 CFM. -- Pulse jet filter cleaning with blasts of compressed air from the clean air side. -- Control panel(3) units were available and now only (2)! !

MULTISCORE CD-4-30 CABINET GROOVER: -- Specifications:30" Wide x 50" long max. cap., 1" max. material thickness; 30 HP main motor; 3-15/16" dia. arbor @ 3,500 RPM; aluminum bedplate slotted at 1-1/2" spacing for about (20) tool positions; quick release tensioner on the arbor drive belts. -- Equipped with: Feed System: Reciprocating push fence with wood extension fingers to assure consistently square cuts; push fence carries the part through the entire cutting area completely past the arbor. Extension fingers are laterally adjustable for different cut widths. Pneumatic infeed plastic holdover fence laterally adj. to hold parts up against the fence. (8) Hold-down arms with lateral & vertical adjustment mount to a T-slot rack to press parts against the feed table during machining. -- Feed Drive/Speed: 2 HP - 1,750 RPM AC Inverter; variable feed motor via gear motor, with dynamic brake; 0 - 60 FPM. Features: -- Material is pushed off the exit side while machine operator can load new parts at the infeed table. Cutterhead assembly is end supported, adjustable up & down via handwheel, and jam nut tooling locking system. -- NOTE: This machine is currently setup for wainscoting and kitchen cabinet doors.

MULTITEK - TRC 460, ...Rim Crusher: ...Less than (300) Hours!Features & Specifications:• Tough MULTITEK® products; simple and strong. Truck Rim Crusher makes wheel salvage easier. • Powered by: Fuel-efficient 25 HP liquid-cooled diesel engine with operator instrument panel control.• The powerful MULTITEK built 6" (15.2 cm) diameter hydraulic cylinder features a Heavy-Duty aluminum piston for continuous duty cycle application.• Power-assisted hydraulic wheel lift arm means less work to load heavy truck wheels.• Powerful 70,000 Lbs (31,752 kG) of crushing force.• Simple: Minimal training and maintenance required.• Standard 2"; ball hitch.• Dimensions: 80" (203 cm) W x 171" (434 cm) L; weight: 3,400 Lbs (1,542 kG).• Engine: Liquid-cooled Diesel with electric start.• Cycle Time: (35) Seconds.

MURPHY-RODGERS MRJ-610-122 Pulse Jet Dust Collector with Rotary Air Lock and Transfer Fan. -- 8,500 CFM approx. @ 9 to 1 air to cloth ratio baghouse dust collector with (60) 10-feet long filters; total cloth area of 943 sq. ft. -- Filter Cleaning: Continuous Self-cleaning Using Compressed Air. -- Main Fan: 30 HP top mounted blower motor. with approx 18" dia. inlet . --System includes: Relay/Transfer fan, steel structure support stand, low height as waste is transferred by fan, safety ladder/platform, top safety railing, and approx 16" Rotary Air Lock. -- Actual model is MRJ 610 -122.

MURPHY-RODGERS MRSE-14-RAL Baghouse Dust CollectorSpecifications: 14" Inlet dia., 4,836 CFM, (63) bags with 520 sq. ft. filter area, 9.3:1 air-to-cloth ratio, 20 HP fan motor, primary separator built into unit, secondary separation of fine particles by filter bag section, cone shaped bottom empties into (4) 55-gal. drums. -- Equipped with: -- Rotary Air Lock. -- Fully automatic shaker controls with electric shaker as standard; consists of panel box with shaker starter, transformer for 11 5V circuitry, solid-state timer for fan deceleration & shaking cycle. -- All necessary relays and internal wiring inside the panel box.