This Drum chipper is used in production of wood chips from logs and wood residues (slabs, board off cuts, veneer waste). It has a toothed driven roller system that allows an efficient infeed of the material, rotor with interchangeable thread locks and with a disposable steel plate in the front of the rotor, hydraulic nose-bar/anvil extractor, infeed conveyor with rubberized belt and hydro-pneumatic unit to lift the chipper/rotor lid. (maintenance). It comes with 01 set of blades and 01 nose-bar/anvil. Does not come with outlet conveyor. - Inlet width: 1000 mm; - Nominal chip size: 23 - 30 mm; - Inlet Height: 450 mm; - Main Motor indicated: 300 hp 4P (2x); - Rotor diameter: Ø 1000 mm; - Soft starter drive panel; - Shaft diameter: Ø 220mm; - Metal detector; - Toothed roller: 03 upper and 03 lower; - Estimated production: 130 m3/ h; (may vary according to the type of wood and the sharpening period of the knives); - Roller diameter: Ø 353mm; - Diameter of roller shafts: Ø 100mm; - Chipper Screen: 65 x 65mm; - Grooved roller: 01; - Infeed conveyor length: 5000mm (included); • Driven roller gearmotor: (helical gears); - Width: 3 500 mm; - Driven rollers motor: 15 hp (2x); - Height: 2 100 mm; - Main motor belt: Torque-Team; - Total length: 10 500 mm; - Inlet conveyor speed: 40 mL / min; - Approximate weight: 22 700 kg; - Number of rotor blades: 03;

This Wood Drum chipper PT600 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, a rubberized conveyor belt and a Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does not come with the output conveyor. - Width of inlet: 600 mm; - Height: 300 mm; - Rotor diameter: 800 mm; - Toothed roller: 01 upper and 01 lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical gears); - Metal detector: Flat model; - Rollers motor size: 5 hp (2x); - Number of rotor knives: 02; - Wood chip size: 25 - 40 mm; - Main motor 125 hp 4P: Included; - Drive panel: Included; - Lead Time: 240 Days; - Estimated production: 55 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 850 mm; - Height: 1 .150 mm; - Overall length: 6 700 mm; - Approximate weight: 4,900 kg.

Vecoplan RG 42/60 XL 60 HP Motor 15" Rotor 42" x 52" Hopper Opening 1" Screen This machine went through a rebuild. It was not big enough for the buyers application. Available immediately.

Vecoplan RG52-60 U Stretch Slow Speed Grinder 60 HP Motor No Control Panel

Vecoplan Model 45/12/2VU HZF Grinder 75 HP Motor 18" Wide opening No Vibrating Infeed conveyor

Vermeer HG365 Grinder New infeed roll and remote control Ready to go to work!

Verville VP300 Bagger Needs a bin 480 volt 3-phase System will need infeed auger/conveyor

Verville VP400 Bagger Includes: Bag Placer & Automatic Bag Sealer 92" Tubes (2) Systems available 575v/3PH NO infeed auger or conveyor included. Systems will be available by the end of April 2024.

Verville VP400 Auto Bag Sealer Auto bag placer Tube size: 15.75" x 11.5" New air lines, contacts, sensors

Verville VP300 Includes controls and hydraulic pack

Verville VP300 Bagger

Vincent 10' x 32' Drum Dryer Includes: Trunions and drive

Vollmer FS73F Grinder, ready to be moved!

Wadkin Visage Profile Grinder Manufacturer specs (to be confirmed): 2 Hp, 220 volt three phase, 60 hz Max cutter length (hydrolock) 355 mm (13") Max cutter length (Mechanical) 315 mm (12.4") Max cutting circle (Profiling) 350 mm (13.8") Max cutting circle (Straight knife) 300 mm (12") Min cutting circle 70 mm (2.75") Max cutting depth of profile 40 mm (1.5") Spindle speed 3600 rpm Adjustable axial grinding angles Machine work light Side template holder with micro-adjustment Turret style tracing pin head Front operator arm rest Swing type diamond tipped wheel dresser Push button motor controls Includes (1) 40" mm diameter grinder arbor

Manufacturer NV300 - With bilateral linear action providing profiling and straight knife grinding up to a max of 310 mm. Will shape and regrind moulder knives in the block and profile grind solid tipped heads. Suitable for HSS, Stellite and TCT. Max length of cutter profile 310 mm. Max dia of cutting circle 300 mm. Includes arbor, grinding wheel, stylus, 220 volt 3-phase

Wadkin Profile Grinder as pictured

10x40 Triple Pass Drum Dryer Webb Dust Burner All piping and controls Cyclone Additional blower Airlock

Weima TH1500 Briquette Press

Weima WLB 1300 Horizontal Grinder 50 HP Motor System works, but will need main bearing replaced.

2020 Weima WLH 600 Grinder 50 HP motor Vibrating Infeed