You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
8 Results Found for River Ridge Equipment Viewing 1 - 8 of 8 results
Call for Price
It's Here!!! 2017 Phoenix DF703 Fellerbuncher. The Phoenix DF703 is ideal for thinning jobs with tight row spacing or other jobs where a quick & nimble machine is needed. The Phoenix DF703 is powered by a tier 3 cummins engine and has a spacious cab for operator comfort. If you've not seen the new three wheeled cutters, come by and check it out or give James Wilson a call at 870-325-6465.
Equipment Location:Rison, AR
Call for Price
2006 648GIII Complete Remanufacture - Dual Arch, Winch, New 30.5 X 32 Firestone Tires. This machine has been through our entire process and includes: New JD Reman Engine, Reman Transmission, Reman Differentials, All New Wiring Harnesses, New Valve Bank, All New Hydraulic Hoses, All Cylinders Repacked, Rechromed and or Replaced, All Pin Holes Line Bored, All New Bushings, All New Pins, New Rotate Motor, Reman'd Grapple, New Exhaust System, New A/C Components, New Windows All Around, New Operators Seat, New Headliner & Floor Mat, New Monitor, New Paint & Much, Much More!!! Call James Wilson @ 870-325-6465 for more information.
Equipment Location:Rison, AR
$129,000
2008 John Deere 648H Partial Remanufacture. Machine has a winch and includes the following: New Crate John Deere Reman Engine – Purchased from Deere Serviced and Resealed Differentials New Diff Bearing Cones & Cups New Ring & Pinion New Pins & Bushings in Grapple Crosshead New Pins & Bushings in Arch & Boom New Weldment Kits for Arch & Boom Pins/Bushings New Winch Roller Shafts & One New Roller New Damper Cover New Heater Hose New Oil/Fuel/Air Filters New Belt New Belt Tensioner & Pulley Assembly New Cab Wiring Harness New A/C Components New Windows All Around Cylinders Repacked and 2 Rods Replaced/1 Piston Replaced/2 Complete Cylinders Replaced New Inching Pedal and Module New Paint & Decals Deere Engine Warranty This machine is woods ready and all mechanical functions operate as they should!!! Call James Wilson for more information 870-325-6465
Equipment Location:Rison, AR
$129,000
20013 John Deere 648H Partial Remanufacture, Dual Arch with Winch – JOHN DEERE ENGINE WARRANTY!!!. This machine has been serviced in our shop and a new John Deere engine has been installed and all filters replaced. We have also installed new pins and bushings in the arch/boom/blade. Cylinders have been repacked. Small & Large U-Joints have been replaced, 2 new winch roller shafts & rollers, new center pins, new A/C compressor, new grapple tongs, new grapple pins, new swing bearing, newly remanufactured grapple rotate motor, many new hoses, new paint and decals. This is the best you’ll find in the ’13 year model. Ready to go to the woods! Call James Wilson at 870-325-6465 for more information.
Equipment Location:Rison, AR
$129,000
2013 John Deere 648H,Sweda Axles, Winch. Recent crate engine installed with 800 hours. Machine is in very good condition with good rubber. This machine will make a dependable every day operator and is ready to go to the woods. Call James Wilson @ 870-325-6465 for more information.
Equipment Location:Rison, AR
$119,000
2007 John Deere 748GIII, Dual Arch, Sweda Axles, Dual Rings, With Winch. This machine is a partial remanufacture and includes the following: Newly rebuilt engine (all Deere parts), New Oil Pump, New Water Pump, All New Filters, New Turbo, New Oil Cooler,New Batteries, New Cab Wiring Harness, Cylinders Repacked, New Pins & Bushings in Boom/Arch/Crosshead/Grapple/Steering Cylinders, New Grapple Rotate Motor, New Monitor Wiring Harness Kit, New Muffler, New Center Pins, New Main Line & Tail Chain, Tons of New Hydraulic Hoses, New Joystick Boots, New Arm Rest Cover, New Windows All Around, New Paint, New Decals, Rubber at 50% Front & 70% Rear. Very Solid Machine, Woods Ready! Call James Wilson at 870-325-6465 for more information.
Equipment Location:Rison, AR
$129,000
2009 748H John Deere Partial Remanufactured Skidder - This machine has been worked in our shop and includes the following: New JD Crate Reman Engine, New Cab Wiring Harness, New Engine Wiring Harness, New Center Pins, New Rear Access Panel, New Engine Comparment Panels, New Weldments/Pins/Bushings for Arch & Boom, New U-Joints, New Belt Tensioner, New Pulley Assembly, New Belt, New Bumper Pads, New Winch Boot, New Lights, New Operator Seat, New Pilot Control Boot, New Horn Button, Repacked Cylinders and 1 Boom Rod Replaced, New Cylinder Pins, New Limb Riser Bushings, New Door Seal & Weather Stripping, New Windows All Around, Many New Hoses/Fittings/O-Rings, New Clutch Disks in Transmission, New Paint and Decals, and much, much, more! Call James Wilson @ 870-325-6465 for more information
Equipment Location:Rison, AR
Call for Price
2009 John Deere 848H Complete Remanufacture. This machine has been through our entire process and includes a new JD reman engine, all new wiring harnesses, reman'd transmission, reman'd differentials, new hydraulic pump, new rotate motor, new steering valve, new hydraulic valve bank, 100% new hydraulic hoses, all new pins/bushings/bearings, reman'd grapple and tongs, new cab windows all around, new operator's seat, new headliner, new floor mat, new monitor, new or remanufactured joystick controls, new work lights, new paint, new 35.5 Goodyear Tires and much, much, more! Call James Wilson at 870-325-6465 for more information.
Equipment Location:Rison, AR