You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
15 Results Found for Meadows Mills, Inc. Viewing 1 - 15 of 15 results
$5,995
We are selling a good condition, used Crosby Size 32 (by 4 Inch) board edger. The serial number is 2556T. The edger has the following features: • One stationary saw collar • One lever shifting saw collar (guide pin shift) with scale for lumber • One moveable fence that is positioned on the left side (when looking from infeed towards the outfeed) of the edger • One 2 3/16 inches diameter mandrel with bearings • Four (4) powered (belt) bottom feed rolls (approximately 3 inches diameter) and two (2) overhead pressure rolls (approximately 4 inches diameter) • Infeed table with three 4 inches diameter rollers mounted with pillow block bearings • Outfeed table (detached) with three 4 inches diameter rollers mounted with pillow block bearings
Equipment Location:North Wilkesboro, NC
$1,500
For sale, one (1) Lincoln 75HP electric motor, 1775RPM, 230/460 volt, 365T frame. New bearings and new shaft. You can pick up in North Wilkesboro, NC or we can arrange for shipment to you. If you’re interested please call Brian Hege at 336-927-4663.
Equipment Location:North Wilkesboro, NC
$6,500
For sale, one (1) 16 inch Meadows stone burr mill with a side sifter. This mill features new wood, sandblasted metal parts, fully dressed millstones and new Babbitt bearings. Hope you love this mill as much as we do. The selling price is $6,500.00. You can pick up the mill in North Wilkesboro, NC or we can arrange to ship it for you. If you’re interested please message or call Brian Hege at 336-927-4663.
Equipment Location:North Wilkesboro, NC
$12,750
For sale, one (1) factory reconditioned 30 inch stone burr mill with material handling fan. This stone burr mill is belt driven by a 25 HP 3 phase 60 hertz electric motor and includes the belt drive with belt guard, material handling fan belt driven from the stone burr mill, material collector with filter bag dust collection system, and pipe to connect material handling fan to material collector. You can pick up the stone burr mill in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call Brian Hege at 336-927-4663.
Equipment Location:North Wilkesboro, NC
$2,400
For sale, one (1) CS Bell number 20 “Modern” hammer mill. Great for engine enthusiasts looking for something to drive with their antique engine. Expertly cleaned and painted. A great piece selling for $2,400.00. You can pick up the hammer mill in North Wilkesboro, NC or we can arrange for its shipment. If you’re interested please call Brian Hege at 336-927-4663.
Equipment Location:North Wilkesboro, NC
Call for Price
For sale, one (1) factory reconditioned Meadows model 3 sawmill with 72 feet track frame, 23 feet carriage frame with six (6) center-dogging headblocks. Includes hydrostatic feed, setworks, all controls, sawyer's cab, and Mellott log turner. You can pick up in North Wilkesboro, NC or we can arrange for shipment to you. If you’re interested please call Brian Hege at 336-927-4663.
Equipment Location:North Wilkesboro, NC
$7,140
The Model 120H log turner utilizes two (2) 2 inches by 12 inches hydraulic cylinders with 1 1/2 inches bores to lift its head. The log turner chain comes standard with 13 teeth that are 1 inch wide. The head is chain driven by a Char-lyn 104-1253 hydraulic motor (included). The drive includes a 13 teeth and 25 teeth sprocket and number 80 chain with chain guard included. Controls, not included, with hoses sell for $2,390.00. 20 GPM Hydraulic power sources, not included, sell for $6,615.00. All prices are FOB North Wilkesboro, NC 28659. For questions please send an email to [email protected] or call 1-800-626-2282, ask to speak with Brian Hege. To place an order please call 1-800-626-2282, ask to speak with Brian Hege.
Equipment Location:North Wilkesboro, NC
$0
Meadows Mills can provide your sawmill with all transfer decks and rollcases for your material handling needs. At Meadows we keep components in stock for fast construction of your order. To receive a quotation please send an email to [email protected] or call 1-800-626-2282, ask to speak with Brian Hege.
Equipment Location:North Wilkesboro, NC
$0
Meadows Mills manufactures the complete line of Miner edgers like the Miner Model 3-31 Stationary Board Edger Shown with 30-HP Gasoline Engine (also available with electric motor or diesel engine). This edger is also available in a portable configuration. When you need a quality board edger and you need it fast please call Meadows Mills, Inc. All prices are FOB North Wilkesboro, NC 28659. For questions please send an email to [email protected] or call 1-800-626-2282, ask to speak with Brian Hege. To place an order please call 1-800-626-2282, ask to speak with Brian Hege.
Equipment Location:North Wilkesboro, NC
$9,695
New Meadows 2 strand live log deck with stop and load. Includes two (2) strands with WR-78 chain in each, two cross bars, hydraulic drive with gearbox, and stop-n-loader with nose skids. You may select from sawmill or debarker style stop-n-loader. Hydraulic motor with gearbox is included. Controls, not included, with hoses sell for $1,865.00. 20 GPM Hydraulic power sources, not included, sell for $6,615.00. All prices are FOB North Wilkesboro, NC 28659. For questions please send an email to [email protected] or call 1-800-626-2282, ask to speak with Brian Hege. To place an order please call 1-800-626-2282, ask to speak with Brian Hege.
Equipment Location:North Wilkesboro, NC
$11,910
New Meadows 3 strand live log deck with stop and load. Includes three (3) strands with WR-78 chain in each, two cross bars, hydraulic drive with gearbox, and stop-n-loader with nose skids. You may select from sawmill or debarker style stop-n-loader. Hydraulic motor with gearbox is included. Controls, not included, with hoses sell for $1,865.00. 20 GPM Hydraulic power sources, not included, sell for $6,615.00. All prices are FOB North Wilkesboro, NC 28659. For questions please send an email to [email protected] or call 1-800-626-2282, ask to speak with Brian Hege. To place an order please call 1-800-626-2282, ask to speak with Brian Hege.
Equipment Location:North Wilkesboro, NC
$14,125
New Meadows 4 strand live log deck with stop and load. Includes four (4) strands with WR-78 chain in each, two cross bars, hydraulic drive with gearbox, and stop-n-loader with nose skids. You may select from sawmill or debarker style stop-n-loader. Hydraulic motor with gearbox is included. Controls, not included, with hoses sell for $1,865.00. 20 GPM Hydraulic power sources, not included, sell for $6,615.00. All prices are FOB North Wilkesboro, NC 28659. For questions please send an email to [email protected] or call 1-800-626-2282, ask to speak with Brian Hege. To place an order please call 1-800-626-2282, ask to speak with Brian Hege.
Equipment Location:North Wilkesboro, NC
$4,950
The Model 100H log turner utilizes one (1) 2 inches by 12 inches hydraulic cylinder with 1 1/2 inches bores to lift its head. The log turner chain comes standard with 13 teeth that are 3/4 inch wide. The head is chain driven by a Char-lyn 103-1032 hydraulic motor (included). The drive includes a 13 teeth and 25 teeth sprocket and number 60 chain with chain guard included. Controls, not included, with hoses sell for $2,110.00. 20 GPM Hydraulic power sources, not included, sell for $6,615.00. All prices are FOB North Wilkesboro, NC 28659. For questions please send an email to [email protected] or call 1-800-626-2282, ask to speak with Brian Hege. To place an order please call 1-800-626-2282, ask to speak with Brian Hege.
Equipment Location:North Wilkesboro, NC
$0
Meadows 4 Inch Deluxe Board Edgers have the following features: Frame Construction: 6" steel channel side rails with welded tubular cross members 20' standard length with 8' long infeed and 8' long outfeed (custom lengths available) 30" or 36" widths 2 pairs of legs constructed from 6" channel Mandrel: 2 15/16" diameter high carbon turned, ground and polished steel with two 1/2" keys Two 2 3/16" pillow block bearings Feed Rolls and Press Rolls: Two 2 15/16" diameter corrugated infeed and two 2 15/16" diameter outfeed bottom rolls connected by a roller chain drive Double v-belt feed from mandrel to feed pulley. Optional variable speed hydraulic feed available. 1 11/16" pillow block bearings Two 5 1/2" diameter overhead press rolls Complete set of anti-kickback fingers with release handle. Rate of Feed: 129 feet per minute at 2000 RPM for handset models Variable for hydraulic models Saws: 16" inserted tooth saw, 8 gauge with 14 teeth, 9/32" kerf, 3 1/4" eye with three 9/16" pin holes on a 4" circle 16" split carbide saws, 10 gauge with 18 teeth, 0.204" kerf Optional Equipment: Hydraulic saw shift Variable speed hydraulic feed Laser lights Movable fence Saw dust blower Live outfeed rolls Tailing device, standard 16' x 5" driven from the edger Electric motor, starter, and v-belt drive
Equipment Location:North Wilkesboro, NC
$1,995
For sale, one (1) double corn sheller called The Favorite manufactured by CM McClung & Company of Knoxville, TN. A full restoration that includes new wood and sandblasted metal. We’re selling this piece for $1,995.00. You can pick up in North Wilkesboro, NC or we can arrange for shipment to you. If you’re interested please call Brian Hege at 336-927-4663.
Equipment Location:North Wilkesboro, NC