You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
57 Results Found for Sawmill Viewing 1 - 25 of 57 results
Call for Price
Acrowood 5216 (52") slant disc chipper 125HP with key knife conversion, SERIAL # 5398-99, model 5216-6, includes spare parts (view photos). prior owner discontinued business, more photos available
Equipment Location:Toledo, WA
Call for Price
used Vibrating conveyor, 30ft long vibrating conveyor -(32ft with additions) , Action Equipment vibrating conveyor 30 inches wide, serial# 1558-1,. stroke 7/8", RPM 438, conveyor trough size: approximate length 30ft, inside width 30inch, ( outside width 38"+-), 11 inches deep, 39"overall height to top of 6" tubing base, removed from service October 2016, we have video of conveyor operating before we removed it. price includes loading onto truck, call for a delivered price. more photos available.
Equipment Location:Toledo, WA
Call for Price
used 50 inch feeder, 36" x 50" feeder, Archer 36" x 50" feeder airlock, used Archer 36 x 50 feeder airlock, Archer model# 36/50 , 1 inch thick knifes/blades, overall height 44 1/2", can provide video demonstration of gear box motor running, repainted blue, more photos available before and after paint,
Equipment Location:Toledo, WA
$0
BM&M Screen 7 x 12 , model 7x12 DS, top screen holes are 1 7/8", for the 2 stainless woven wire fines screens with 3/16"+holes , ball decks and fines pans are stainless steel, 3 of the discharge chutes are stainless steel, the current photos show before, during and after paint, more photos to come, support stand and hangers will be attached to screen after paint job is finished.
Equipment Location:Toledo, WA
Call for Price
#2 BM&M 2 deck, 3 sorts, ball deck, 6ft x 16ft screen area, two screens available •YouTube video of screen before removal Jan 2015, http://youtu.be/IOG3veQzBKQ •YouTube video of screen after it was cleaned http://youtu.be/924G8CSPxec •prior use was for wood chips, 2 decks and 3 sorts •stainless ball deck on bottom fines deck. •96 square feet of screen area- 6ft X 16Ft •Was removed from service in January 2015 •Can provide video of them operating before removal in January 2015 •More pictures and details to come •Two screens available •1 electric motor, 1 belt guard, 4 hanger assemblies with attached universal joints, 4 brackets to attach hangers •Can load the screens into a van or container to save on freight cost. •NO loading cost! •Call for a delivered price to your location •other photos are available upon request, visit machineryscene.com
Equipment Location:Toledo, WA
Call for Price
3 strand Can-Am box chain WD 480 XHD box chain, used 480 drag chain, used heavy duty drag chain 480 XHD chain for sale, 1000 feet of Can-Am 480 xhd box chain for sale, Can-Am sprockets and Heavy duty drag chain 480, harden pin, Can-Am drag chain sprockets, Chain number: WD-480XHD, Ultimate strength:122,000 lbs., Allowable working load: 24,400 lbs., Links per foot: 1.5, Average weight per foot 21 lbs., Approximate overall width 15 1/4 inches, Length of bearing 13 inches, Rivet diameter 1 inch, side bar thickness: 5/8 inch, Side bar height: 2 inches, Approximate tooth face at pitch line: 11 inches,. 1000 feet of used Can Am heavy duty 480 drag chain, Can-Am drive sprockets, tail sprockets/spools and shafts ( 6") and Dodge bearings SAF-XT 534 are available, Can-Am 3 strand drag chain sprockets, tail spools and shafts, additional photos and information available, We have the drive and tail sections triple strand 480 XHD box chain conveyors, Can am drag chain sprockets 3 strand 480 XHD box drag chain conveyors lined with plastic or UHMW, We have dismantled both of the 3 strand conveyors ( 70ft long+), and they are ready for prompt shipment. We are selling conveyor parts separately or together: chain, sprockets, shaft and bearings. Prior use was conveying wood chips, Call for more photos, questions or a delivered price.
Equipment Location:Toledo, WA
Call for Price
Caterpillar 980 C or 980F grapple log forks, manufactured by Medford. arrangement#8K2150, Call for a price and a freight cost.
Equipment Location:Toledo, WA
Call for Price
Used screw auger conveyor 12 inch, 20ft long screw auger conveyor. flighting thickness 3/16+-, trough width 13”, trough inside length 19ft 8inches, Dodge speed reducer size SCXT125, part# 351164 JF, ratio 25.64, , 5HP motor RPM 1730, 208/230/380/460 volt, test run video available. Call for a delivery quote
Equipment Location:Toledo, WA
Call for Price
Log haul conveyor, h132 chain with flites, log trough conveyor, 70 ft long, bottom ID of trough is 13" wide and the to[ ID is 42" wide+-, most of the trough is lined with nylon/plastic view photos to verify, this conveyor is removed in one 70ft piece and ready to load from our facility, we can cut the conveyor into two pieces to reduce the shipping cost.(an additional 30ft of the same log conveyor is available). Price includes loading on to truck,
Equipment Location:Toledo, WA
Call for Price
Eriez SE 7000 series electromagnet, Eriez suspended magnet, Eriez DC magnet, used Eriez electromagnet, used conveyor magnet, magnet Info: Model SE-7535 mc- style 793390 serial# 104591, maximum belt conveyor width 54”-maximum burden depth 15”- magnet dimensions: 54” w X 54” L X 24 ½” tall, overall max. OD. dimensions : 54” w X 64” long X 34” tall, Eriez transformer model# 10K41, transformer specs. 3 phase 60/50 Hz., 460 ac volts input- 120 DC volts output, I-Beam length 14ft X 8” tall, air cylinder stroke 4ft, 2 CM trolleys to hang magnet from, magnet came from a complete plant liquidation, more information available, call for a delivered price
Equipment Location:Toledo, WA
$9,500
Gruendler Wood Hog •Model 24-3 •Horizontal feed •Serial# 21444, •GE 75HP 220/440 volt 1775 RPM main motor, •Direct drive, 3/4HP infeed motor for feed wheel, •Bottom discharge is 10 inch diameter . •Hammers are 1 1/2 in width. •Rotor width is approx. 24 inches. • Infeed opening is 3 inches tall, infeed opening width 17 1/2 inches. •We can quote you a delivered price to your location. stored inside. motor test available
Equipment Location:Toledo, WA
$21,500
•Jacobson / Carter Day XLT Full Circle Hammermill, •125HP •Reliance XE Energy Efficient Extra Tough direct drive motor •460 volts •1785 RPM •Model # 42315 XLT •Serial# 39960 •1/4 inch thick hammers •Inside width approx. 14 inches •Top Gravity feed • Left side and or right side discharge •Large side access rolling panels for easy rotor and hammer access •Motor starter •Prior use was grinding straw • Stored inside •Motor test available Have a starter that came with Hammermill, but don't know if if works or is the correct size. •Can quote you a delivered price to your location
Equipment Location:Toledo, WA
Call
Tri-State Resaw by Kimwood Corp. Model T-36-4 36” X 3 1/2” wheel size and recently reground 20 HP motor with AC inverter controller variable speed. Feed rollers recently rebuilt. All electrical in working order. Tilting feed operates up to 45 degree angle, spring loaded with blade tension. Rebuilt upper and lower block pressure type blade guides. Feed speed varies from 10 to 250 FPM, (VFD) 2 variable frequency drives, one the infeed motors and main band saw blade 20HP motor Recent epoxy paint Updated with modern electrical control panel with built in disconnect switch. The Resaw appears to be recently refurbished Always operated and stored inside More details , pictures and test run video available upon request. Doesn't require a saw dust pit to operate Price includes loading onto your truck. Can provide a delivered price upon request.
Equipment Location:Toledo, WA
Call for Price
Kockums 2 deck- 3 sorts chip screen, model KS1010, was running when removed, Baldor 7 1/2HP motor 230/460V, approximate screen area is 10ft X 10ft, approximate hole size on top screen 1 1/2 inch, price includes loading, priced to sell, call for price and a delivery cost,
Equipment Location:Toledo, WA
$3,200
used 300HP electric motor, tested ran at independent motor shop, have paper work and video, looks to be rewound from the wire leads
Equipment Location:Toledo, WA
Call for Price
Used Linden double acting step feeder(s), Linden 4-36-50 log step feeder, serial# 98-1151 and 1152, 4 steps, 36" stroke, 50 degree angle, 25 hp electric motor belt driven to SM Cyclo reducer drive, approximately 4ft elevation gain, each box is 24" wide and is referred to "narrow box version" and has maximum contact on logs, 22 boxes wide, log length capacity 50ft, factory prints/drawings can be view in photos, Step feeder can be used as 2 individual 25ft long feeders and is priced at per 25ft section- 2 total section available - both run independently and has a electric motor and gear reducer for each section, estimated weight of each 25ft section is approximately 50,000 LBS or 100,000LBS for the total 50ft section. All information is from Linden MFG and we have a copy of the original drawings available, Step feeders are stored in our yard and ready for prompt shipment. Price includes loading onto truck, we can also quote you a delivered price to your location. YouTube videos of step feeder before it was dismantled: https://youtu.be/r-4vExQlDQM , https://youtu.be/uQ4pI19p9t8 , https://youtu.be/HziXK2CtgsI , https://youtu.be/pk8iqnsIB78 , https://youtu.be/MidD6aN8Zmw
Equipment Location:Toledo, WA
Call for Price
Used Mikro Pulsair dust collector, 26,000 CFM dust collection system, used 26000 cfm pulse jet dust collector Baghouse info: serial# 930044 H1, model # 221S (6) -10-20 TRH "C", rating 20 inches H20, 26,000 cfm capacity, 3470 sq.ft. of filter/media area, ( 6inch diameter filter bags), explosion vents can be added to baghouse, baghouse details: inlet 36", has a patented Casadaire Inlet diffuser- it distributes the dust load across the filter bags, ( Cascadair diffuser results: increase bag life, lower pressure drop at significantly increase air flow capacity, minimum dust re-entrainment, overall better filter performance ), Fan details: 35" fan inlet- 75HP motor -Western Pneumatic fan- with Twin Cities wheel- currently the fan capacity is 14,000cfm - fan has a capacity of 21,000 CFM with a higher horse power motor (different motors are available), different fans are available also, Baghouse details: maximum air volume 27,000 +- CFM - buyer will need to confirm with manufacturer - performance depends on type of dust, dust load, moisture of dust and other factors.. baghouse was repainted on 3 side and both ends-- bottom side was NOT repainted, the Western Pneumatics fan and airlock was repainted- additional photos are available of the pieces before we repainted them, prior use of the dust collector was collecting wood dust, we can provide a demonstration video of the fan and airlock running upon request, additional photos and information are available, some blow pipe and cat walks with ladders are included, new filter bags are not include-but are available, this dust collection system is dismantled at our facility and ready for prompt shipment- price includes loading onto freight trucks, Call for a delivered price to your location. 360.864.2800 David
Equipment Location:Toledo, WA
Call for Price
Vibratory conveyor 55’, used Mill Power vibrating conveyor 18”, 55ft vibrating conveyor Mill Power used vibrating conveyor, natural frequency vibrating trough conveyor, 55 feet long, 18 inch width at the bottom- 30 “ wide at the top, 12 inches deep, overall height OD. 37 ½”, #89293, natural frequency vibrating conveyor, prior use was inside of a building conveying wood waste, vibratory conveyor was removed from the prior location in “one” piece-- this can reduce the installation cost of the conveyor, conveyor was purchased from a total plant liquidation, Buyer can request the conveyor to be cut to any length, call for pricing and a delivery cost, we can test run motor and provide video, more photos available
Equipment Location:Toledo, WA
Call for Price
Used Vibratory conveyor, Mill Power vibrating conveyor, 40ft vibrating conveyor, natural frequency conveyor Mill Power used vibrating conveyor, 40 feet long, 24 inch width at the bottom- 30 “ wide at the top, 12 inches deep, overall height OD. 37 ½”, natural frequency vibrating conveyor, prior use was inside of a building conveying wood waste, vibratory conveyor was removed from the prior location in “one” piece-- this can reduce the installation cost of the conveyor, conveyor was purchased from a total plant liquidation, Buyer can request the conveyor to be cut to any length, call for pricing and a delivery cost, we can test run motor and provide video, more photos available
Equipment Location:Toledo, WA
Call for Price
Mill Power vibratory trough conveyor, 37ft vibrating conveyor, natural frequency vibrating trough conveyor Mill Power used vibrating conveyor, 37 feet long, 18 inch width at the bottom- 29“ wide at the top, 12 inches deep, overall height OD. 36”, natural frequency vibrating conveyor prior used was inside of a building conveying wood waste, vibratory conveyor will be removed from the prior location in “one” piece-- this can reduce of reinstallation of conveyor. Buyer can upon request the conveyor cut to any length before shipping, call for pricing and a delivery cost, more photos available
Equipment Location:Toledo, WA
Call for Price
Montgomery blow hog, used Montgomery 26hd40 HZF blow hog, Montgomery horizontal blow hog 26”, 100hp horizontal hog Montgomery 26HD40HZF, serial#2633, Used Montgomery26HD40 horizontal blow hog 100hp, more photo available, YouTube video available of rotor, prior use was hogging up wood panels/particle board inside of a building- and is also currently stored inside of our warehouse, several used vibrating conveyors for sale, the 100HP motor will be test ran and video of test, call for a delivered price,
Equipment Location:Toledo, WA
Call for Price
Montgomery Punch and die blow hog, Montgomery 34HD40 HZF blow hog, used Montgomery 34” blow hog, Montgomery industries HD series hog, Montgomery punch and die hog, model# 34HD40-HZF, serial# 2714, Montgomery punch & die hog, 18 ¾” cutting circle, integral fan ( Blo-Hog) , approximate hog inlet size 8” tall x 34” wide+-, 1 inch diameter holes in screen, 125HP Baldor Super E motor with motor base 460 volt 1780 RPM 444T frame, 13 inch diameter discharge blow pipe from fan, we have a demonstration video of the motor, stored inside warehouse, we have photos available of the hog before we painted its, stored inside, Call for a delivered price to your location
Equipment Location:Toledo, WA
$7,400
New York Blower fan Size 574DH •Series 20 GI Fan •Shop# M10845 100 •150HP motor, 460 volt, 1785 RPM •estimated 34,000 CFM @10" static pressure, buyer will need to verify from manufacture •Inlet vane damper •Round inlet size 33 inches •rectangle outlet size 32.5" X 26.5" •Overall measurement: Height 105", Length 143", Width 95" •prior use was pulling in clean air behind wood dust filter •fan was in service until October 2014 •Upon request we can take a video, and paper work of test run of fan and motor by an independent motor repair shop •Stored inside after we removed (Oct. 2014) it from prior location •Price includes loading on your truck, Estimated CFM and SP is available also
Equipment Location:Toledo, WA
Call for Price
Precision twin deck chip screen, approximate screen area 6ft X 6ft. screen size PCS66, serial# S-1225, removed from service 2015- prior owner shut down entire plant, top screen hole size 2 1/4" x 2 1/4", bottom screen hole size 1/4". can provide video of test run if requested,
Equipment Location:Toledo, WA
$19,500
Quincy Northwest 300HP Rotary Screw Air Compressor Model# QNW-1521-D Serial # 960555 prior owner closed facility, was operating before it was removed Test ran and serviced (June 18 2015) by Quincy Northwest/Roger Machinery at Centralia WA service center Additional YouTube videos available: https://youtu.be/X3rOdtkUrzI
Equipment Location:Toledo, WA