You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
14 Results Found for BioMass Viewing 1 - 14 of 14 results
Call
Acrowood 5216 (52") slant disc chipper 125HP with key knife conversion, SERIAL # 5398-99, model 5216-6, includes spare parts (view photos). prior owner discontinued business, more photos available
Equipment Location:Toledo, WA
$3,150
Allen Bradey 150-B180NBD soft start, 150HP max. @ 460 volts, test run video taken July 2016 :https://youtu.be/w8awrTxAur0
Equipment Location:Toledo, WA
Call
used 50 inch feeder, 36" x 50" feeder, Archer 36" x 50" feeder airlock, used Archer 36 x 50 feeder airlock, Archer model# 36/50 , 1 inch thick knifes/blades, overall height 44 1/2", can provide video demonstration of gear box motor running, repainted blue, more photos available before and after paint,
Equipment Location:Toledo, WA
$0
BM&M Screen 7 x 12 , model 7x12 DS, top screen holes are 1 7/8", for the 2 stainless woven wire fines screens with 3/16"+holes , ball decks and fines pans are stainless steel, 3 of the discharge chutes are stainless steel, the current photos show before, during and after paint, more photos to come, support stand and hangers will be attached to screen after paint job is finished.
Equipment Location:Toledo, WA
Call
#2 BM&M 2 deck, 3 sorts, ball deck, 6ft x 16ft screen area, two screens available •YouTube video of screen before removal Jan 2015, http://youtu.be/IOG3veQzBKQ •YouTube video of screen after it was cleaned http://youtu.be/924G8CSPxec •prior use was for wood chips, 2 decks and 3 sorts •stainless ball deck on bottom fines deck. •96 square feet of screen area- 6ft X 16Ft •Was removed from service in January 2015 •Can provide video of them operating before removal in January 2015 •More pictures and details to come •Two screens available •1 electric motor, 1 belt guard, 4 hanger assemblies with attached universal joints, 4 brackets to attach hangers •Can load the screens into a van or container to save on freight cost. •NO loading cost! •Call for a delivered price to your location •other photos are available upon request, visit machineryscene.com
Equipment Location:Toledo, WA
$9,500
Gruendler Wood Hog •Model 24-3 •Horizontal feed •Serial# 21444, •GE 75HP 220/440 volt 1775 RPM main motor, •Direct drive, 3/4HP infeed motor for feed wheel, •Bottom discharge is 10 inch diameter . •Hammers are 1 1/2 in width. •Rotor width is approx. 24 inches. • Infeed opening is 3 inches tall, infeed opening width 17 1/2 inches. •We can quote you a delivered price to your location. stored inside. motor test available
Equipment Location:Toledo, WA
$21,500
•Jacobson / Carter Day XLT Full Circle Hammermill, •125HP •Reliance XE Energy Efficient Extra Tough direct drive motor •460 volts •1785 RPM •Model # 42315 XLT •Serial# 39960 •1/4 inch thick hammers •Inside width approx. 14 inches •Top Gravity feed • Left side and or right side discharge •Large side access rolling panels for easy rotor and hammer access •Motor starter •Prior use was grinding straw • Stored inside •Motor test available Have a starter that came with Hammermill, but don't know if if works or is the correct size. •Can quote you a delivered price to your location
Equipment Location:Toledo, WA
$7,400
New York Blower fan Size 574DH •Series 20 GI Fan •Shop# M10845 100 •150HP motor, 460 volt, 1785 RPM •estimated 34,000 CFM @10" static pressure, buyer will need to verify from manufacture •Inlet vane damper •Round inlet size 33 inches •rectangle outlet size 32.5" X 26.5" •Overall measurement: Height 105", Length 143", Width 95" •prior use was pulling in clean air behind wood dust filter •fan was in service until October 2014 •Upon request we can take a video, and paper work of test run of fan and motor by an independent motor repair shop •Stored inside after we removed (Oct. 2014) it from prior location •Price includes loading on your truck, Estimated CFM and SP is available also
Equipment Location:Toledo, WA
Call for Price
Live bottom surge bin conveyor, surge bin, surge hopper, drag chain feeder bin, feeder bin, hopper feeder, live bottom bin feeder 27ft long drag chain hopper, 10 ft wide chain conveyor surge bin feeder, 10 ft wide x 26ft long surge bin conveyor, 28 strand of 78 chain, drive shaft diameter is 3 15/16", motor and gear box included, approximate weight 20,000 lbs, (2 angle iron braces were added across side walls for bracing during transporting) live bottom surge bin feeder has been removed in one piece and will be shipped in one piece to reduce the cost of installation- unless buyer wants to ship it in a reduce size. Call pricing and shipping cost to your location.
Equipment Location:Toledo, WA
Call for Price
used Can-Am WD 480 XHD drag chain, Heavy duty drag chain 480, harden pin, Can-Am drag chain sprockets, Chain number: WD-480XHD, Ultimate strength:122,000 lbs., Allowable working load: 24,400 lbs., Links per foot: 1.5, Average weight per foot 21 lbs., Approximate overall width 15 1/4 inches, Length of bearing 13 inches, Rivet diameter 1 inch, side bar thickness: 5/8 inch, Side bar height: 2 inches, Approximate tooth face at pitch line: 11 inches,. 1000 feet of used Can Am heavy duty 480 drag chain, Can-Am drive sprockets, tail sprockets/spools and shafts ( 6") and Dodge bearings SAF-XT 534 are available, Can-Am 3 strand drag chain sprockets, tail spools and shafts, additional photos and information available, We have the drive and tail sections of these Rader triple strand 480 XHD box chain conveyors, Can am drag chain sprockets 3 strand 480 box drag chain conveyors lined width plastic or UHMW, We have dismantled both of the 3 strand conveyors ( 70ft long+), and they are ready for prompt shipment. We are selling either the conveyors as whole part, or the conveyor parts separately: chain, sprockets, shaft and bearings. Prior use was conveying wood chips, Call for more photos, questions or a delivered price.
Equipment Location:Toledo, WA
$3,500
Schutte Hammer mill, horizontal feed, 60HP, Stored inside,
Equipment Location:Toledo, WA
$3,900
Siemens 300 HP direct coupler type electric motor •1790RPM •460 Volt •340 amps •Frame 449TS •Serial # 1-5113-39484-1-1 made in USA •Test ran and painted by independent motor shop, have paper work. stored inside •Call for more information or a freight rate 2 Reduced voltage starters also available(sold separately)
Equipment Location:Toledo, WA
Call
Teco 800 HP, 600HP electric motor, 2300 / 4160 volt 800 / 600HP electric motor, 1186 RPM, Frame 5810L, stored inside. We can have independent motor shop test run motor and provide video of test run.
Equipment Location:Toledo, WA
Call
Heavy duty powered rotating platform •Industrial turntables •Platform size is 50" wide by 98" long •Large diameter ring gearElectric gear motor to rotate table topTables can be painted white •Top platform metal plate 3/8" thick •Platform frame is 6" X 6" square tube •Several platforms available •Call for a delivered price 1/2HP Sew-Eurodrive, 230/460volt The YouTube video shows one of the turn tables (painted white) manually rotating, we removed the gear box so we could use it manually
Equipment Location:Toledo, WA