Brand new Double Arbor Gang Saw. In stock price will not be available after this machine sells. This one is 8". This machine is a durable heavy duty machine with 50 plus years experience behind it. MCC and operator console included. This is a limited offer as this machine comes with one complete set of saws. comes with a set of spare ware parts. Parts are stocked in the US by Kittrell Sawmill Brokers FOB Columbia, TN Will load on your truck. Call Jackie 931-698-3342. Retail price $225,000 save $26,150 Quality and performance with every cut Simple handling, operation and maintenance. Call Kittrell 931-797-6284

This mighty bull gang edger is ready for work. Cutting 6.25" X 27.5" cuts down to 1/2" boards. This 100 HP single arbor machine has diamond circular saws, Single saw arbor is fixed. Hydraulic feed through with hydraulic top press roll. Infeed table with hydraulic feed roller and fence for accuracy in sawing. This machine is available in a double arbor machine which will cut a little faster than the single. This saw has (2) 50 hp independent arbor motors for the double arbor machine. See it at IWF in August 2024 or order yours today. 931-698-3342

Buss Type 44 36" Wide Top Planer ready to go still hooked up to run yourself. Motivated seller says let's go! 3 phase 440/480 Volt Call Amy 928-723-9449. 931-797-6284

CAT Generator, Call Amy for Details 928-723-9449

OWNER IS RETIRING! Sliding Gravity Roll Case for Straight Line Rip Saw, Special Design w/ air stop brakes, (2) steel overhead mounts and one laser light, Excellent for Precision Edging. Seller will load on your truck. (ref #74) Call Rachel for more information 931-797-6284

Rockwell table saw will take 12” or 14” blades, new 7.5 motor, includes a used Biesemeyer fence put still has original fence on machine, Ref # 186, Call Amy for more information 928-723-9449

Dependable 4 head push through moulder. Still hooked up and ready for you to work Call Amy. 928-723-9449

Nice Condition and cuts a glue line machine still in production so you can run it yourself. We are motivated to sell so make you offer today! 3 phase 480/440 volt Call Amy 928-723-9449. 931-698-3342

Grizzly G0569 Bandsaw, 24”, 7.5 HP, heavy duty, (2) new blades still in the box, guide bearings have been replaced, excellent condition, Ref # 186, Call Amy 928-723-9449

(1) approx. 24" 20 HP Hartzell high speed transfer fan, (1) 56" 150 HP collector fan (

Hemco double end trimmer w/ even end rolls, feed through chains & outfeed chains (trimmer can sell with stack and sort line upon request), Call Amy for more information 928-723-9449 OBO

Hemco Lumber Trim, Stack and Sort Line – (4) strand infeed w/ destacker and waterfall unscrambler board dealer to Hemco (9) station drop saw trimmer w/ controls and block conveyor, Hemco (11) bay lumber sorter w/ 75’ of haul out chain, includes hydraulic power packs, waterfall unscrambler to (4) chain arm stacker, 8’ wide, unground cylinder ground package hoist, stacking stick conveyor included, includes controllers & Dell PC View Sonic screen, Sullair LS-10 tank mount air compressor, Call Amy for more information 928-723-9449 OBO

Ingersoll Rand SSR II 50 HP screw type air compressor, believed to have 20,000 hours, Ingersoll Rand Model TS2A dryer 150 PSI Max refrigerant dryer (ref #174), Call Rachel for more information 931-797-6284

Jeffrey Model 44MB hog, bottom discharge, top feed w/ 200 HP motor, mounted on steel frame (hammers are heavily worn as thy were used for regrinding chips) (ref #162) Call Amy for more information (928) 723-9449

Nice powerful bandsaw with extended table still running so you can run it yourself "try before you buy". (2) available for sale. Seller is motivated so if you need this saw let's talk. Call Amy. 928-723-9449 931-797-6284.

REDUCED - Reckart Machine Super band resaw system, 50 HP, 12" x 16" opening w/ motor control mounted, 41" wheels, saw guides, hydraulic feed, air setworks w/ air reserve tank, 18" wide roll case (heavy duty), 12' wide transfer decks (4) 81X chain w/ hook stop, hydraulic drives, infeed roll case 18" w/ (4) arm roller chain position wear plates w/ hydraulic power pack, 10" x 18" rolls on roll case, dust conveyor, paint is not even off wear plates (GEM in the dust!!) (Ref #154) Call Logan 304-641-6640 - surge deck available for an additional $5,000

Schutte horizontal hog, replaced shaft w/ blower & motor, heavy duty design (ref #162) Call Amy for more information (928) 723-9449

16' x 17' x 32' overhead chip bin, includes cyclone on top of bin and HPU (buyer is responsible for all rigging and proof of insurance is required) (main 150 HP collector fan and 20 HP transfer fan available for additional $10k (ref #173)

Walling Resaws 4 Head Resaw w/ Run Around Table 15 hp electric motor on each head, all feeds, transfers and rolls are hydraulic. Air cylinders on pop ups and cant pushers, 9'x35'x7' tall overall. Includes electrical and control panels, 5" feed belt through all heads. 3/4x30" band wheels, 1" bands. Includes flex hose and PVC pipe for dust, approx. 34' of 7" PVC pipe. Will cut a 6"x10" cant, Have over a hundred photos if you would like to see more, Ref #0 Contact Rachel 931-797-6284

1996 Weinig Hydro-Mat 23 (6) head moulder w/ control station and hydraulic power unit, S/N 023-2386, (8) 9.5”, (6) 6 3/4”, and (19) 2.5” heads, all but (4) with knives (most 6 knives per head), includes head and knives currently installed on moulder w/ outfeed 18” C14.5 belt conveyor and drive w/ toolbox w/ misc. knives, templates for knife & other misc. W/ Weinig (9) strand infeed table S/N 314-LCF/16 w/ hydraulic power unit w/ blow, $20,000 without tooling (ref # 162) Call Amy for more information (928) 723-9449