You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
181 Results Found for Bethel Equipment Company Viewing 1 - 25 of 181 results
$24,500
1995 Brush Bandit Model 1400 Chipper, Knuckleboom Loader with Rotobec Grapple, Cummins Model 6BTA 3.9 Turbo Diesel Engine with 12,680 Hours, Hydraulic Tongue Jack, Tandem Axle with 12 volt electric brakes, Hand Crank Height Chute, Swing Out Control Console, Radiator Replaced 5 years ago, One Owner Machine Great Condition
Equipment Location:NorthEast
$99,900
2013 Brush Bandit 1850 Chipper, John Deere 325 HP Model 6090HF4858 Tier 3 Engine, Only 300 Hours, Equipped with Hydraulic Swivel, Hydraulic vertical and flapper attachments,, Hydraulic Winch, Hydraulic Lift Cylinder, Hydraulic Tongue jack with back up manual front and rear stabilizers, Auto Feed Reverse, Engine Pre Cleaners Tandem Axle with 12 volt electric brakes, Lights 18" diameter capacity disc chipper. New Pricing is around $160,000.00 This Unit is Priced to Move at $99,900.00
Equipment Location:NorthEast
$49,900
2005 Brush Bandit Model 1850XP Whole Tree Chipper, Cummins 250 Hp 6 Cylinder Turbo Diesel, Hours Unknown, Reading 200 Hours on Meter, Tandem Axle, Electric Brakes, Hydraulic Swivel Discharge, Hydraulic Lift Cylinder, Hydraulic Tongue jack with Pintle Hitch, Hydraulic Lift Cylinder, Morbark Knuckleboom Loader with Rotobec Grapple , Swing Out Control Console. Price REDUCED from $60,000
Equipment Location:South
$34,500
2006 Brush Bandit Model 1890XP Chipper (18" Capacity) New Caterpillar 130HP Turbo Diesel Engine with 500 Hours, Frame Hours are 3,500, Hydraulic Lift Cylinder, Autofeed Reverse, Hand Crank Height Discharge and Swivel Chute, Hydraulic Winch, New Cable
Equipment Location:South
$21,500
2004 Brush Bandit Model 250XP Chipper, Caterpillar 125 HP Engine with 2112 Hours, Autofeed Reverse, Twin Disc Clutch, Hand Crank Swivel Chute, Hand Crank Height Chute, Good Condition
Equipment Location:Northeast
$26,900
2004 Brush Bandit Model 254XP Chipper, Caterpillar 140 HP Turbo Diesel Original 150 Hours on this machine, Hydraulic Lift Cylinder, Autofeed Reverse, Hand Crank Height and Hand Crank Swivel Discharge Chute, No WInch, Twin Disc Clutch Tandem Axle with 12 volt Brakes New Chipper Bearings,Filters ,New Chipper Blades and Anvil
Equipment Location:South Central
$154,000
2007 Bandit Beast 1680 Horizontal Grinder, John Deere 140 HP Turbo Diesel Engine,2,500 Hours Includes Wireless Remote Control and Tether Cord Control, Rubber Infeed Conveyor, Hydraulic Lift Assist, Hydraulic Tongue Jack, Pintle Hitch with Air Brakes and Tandem Axle. Discharge Conveyor with Metal Pulley
Equipment Location:MidAtlantic
$59,900
2009 Barko 495 Epic Loader, Includes CSI Delimber, Plumbed for a Ground Saw , Quick Disconnect, Engine has 10,500 Hours, Enclosed Cab with Heat and Air , Currently Working in the woods, Turntable Bearing in Good Condition, More pictures coming soon. Unit Priced at $59,900.00
Equipment Location:Bethel, NC
$57,900
2005 Barko 495ML Log Loader Equipped with CTR Buck Saw, Mounted on a Pitts Trailer, Engine has Original 7,000 Hours, 22.5 Tires in Good Condition. Heat in Cab, Air Conditioner does not work
Equipment Location:WEST
Call for Price
2004 Barko 495ML Self Propelled Log Loader, Engine has 3,000 Hours on Rebuild, 16,000 Frame Hours, Completely gone through, Plumbed for Delimber and Saw, Tow behind 60" Circle Saw, Live Heal, Call For Pricing
Equipment Location:NorthEast
$30,900
1995 Bell Ultra T Feller Buncher with Dangle Head Saw, Deutz 80 Hp Diesel Engine, Hours Unknown, Joystick Controls, Heat and Air in Cab, 28L x 26 Tires 70% Tread with Ring Chains on the Front, Nice Running Machine
Equipment Location:South
$25,500
2008 Carlton Model SP 7015 Self Propelled Stump Cutter, Deutz 60 HP Turbo Diesel, 1,100 Hours, Radiio Remote Control, 25' Tether Control, 4x4 Hydraulic Steering , 2 Speed Ground Travel
Equipment Location:Northeast
$34,000
1989 Caterpillar EL- 200B with Balderson Stroke Delimber Enclosed Cab Heat Only, Undercarriage is 70%, Engine has 10,000 Hours Good running condition
Equipment Location:North
$32,950
1981 Caterpillar 518 Cable Skidder Engine has 7,900 Hours, Frame Hours Unknown, 28L x 26 Tires (2) New Tires on Rear and (2) on Front at 15%, New Paint, Center Section is Tight, Brakes are Good, Long Wheel Base
Equipment Location:MidAtlantic
$34,900
1998 Caterpillar 525 Grapple Skidder, No Winch, 11,704 Hours, Enclosed Cab with Heat, Air Conditioner is not working, 30.5 x 32 Tires at 55% Multi Ring Chains Front and Rear, Center Section done 1 year ago, Steering Pins and Bushings are New, Rotation on Grapple Does not Work, Great Running Condition
Equipment Location:Northeast
$32,500
1996 Caterpillar 525 Grapple Skidder, No Winch, Enclosed Cab with Heat Center Section is Tight 30.5 x 32 Tires Tire Wear 35-40% Chains Front and Rear
Equipment Location:North
$33,000
1995 Caterpillar Model 525 Grapple Skidder, No Winch, Enclosed Cab with Heat Air Conditioner needs a charge, 30.5 x 32 Tires at 25%Double Diamond Chains and Ice Chains Rear Engine is Reading 9,000 Hours Center Section is Tight
Equipment Location:North
$43,500
2003 Caterpillar 525B Grapple Skidder, Winch, 30.5 x 32 Tires, Tread 25-35, Engine has 15,585 Original Hours, Middle Center Pins a little loose, Enclosed Cab with Heat, Air needs charge
Equipment Location:MidAtlantic
$49,500
2005 Caterpillar 525B Grapple Skidder, 14,600 Original hours, 30.5 x 32 Tires, Heat and Air in Cab, Center Section is Tight, Good Running Condition
Equipment Location:Northeast
$60,900
2002 Caterpillar 525B Grapple Skidder, Winch,15,150 Hours, Enclosed Cab with Heat and Air 30.5 x 32 Tires 45%-50% Center Section is tight,New Paint, Governor replaced 1 year ago, Transmission Shifts Good,
Equipment Location:Northeast
$39,900
2004 Caterpillar 525B Grapple Skidder, Winch, Enclosed Cab with Heat, Air Conditioner Needs a Compressor and Condenser, 30.5 x 32 Tires 45-55% Nice Unit Priced to Move
Equipment Location:South
$39,500
2001 Caterpillar 525B Grapple Skidder , Winch, Engine Rebuilt with 2,500 Hours, 13,330 Frame Hours, Tires are 30.5 x 32 Tires Front 25% Rear 75%, Enclosed Cab with Heat, Air Conditioner needs charged, Center Section has some play Great Price Ready for the Woods. $39,500.00
Equipment Location:South
$129,500
2007 Caterpillar Model 525 C Grapple Skidder One Owner 5,031 Original Hours , No Winch, Fire Suppression , 30.5 x 32 Tires 85% Rear 55% Front, Ring Chains Rear have 1000 Hours on them. Ring Chains on Front as well, Cab Heat and AIr.Center Pins and Bushings Tight Excellent Condition
Equipment Location:Northeast
$56,900
2007 Caterpillar 525C Grapple Skidder, Winch, Torque Convertor , Heat and AC In Cab 14,000 Original Hours, 30.5 x 32 Tires Fronts 45% Rears 65% Center Section Good Priced at $56,900.00
Equipment Location:Northeast
$57,900
2008 Caterpillar 525C Grapple Skidder, Winch, Engine has 1,200 Hours on Rebuild , Enclosed Cab with Heat and Air Conditioning , 30.5 x 32 Tires 90% Tread Front and Rear, Center Section Tight, Priced at $57,900.00
Equipment Location:NorthEast