--at Auction, Seller Loading, Under power & available for inspection!-- BIESSE ROVER 24 FTS CNC Flat Table Machining Center, with ATC & Boring - Specifications: 4' x 10' Flat table design for "Nested Base" processing: Working cap.: X-Axis is 122" (3,100 mm), Y-axis is 49" (1,250 mm), Z-axis is 6.1" (155 mm). - Worktable: Phenolic "MATRIX" grid vacuum table for FT "Nesting" or single part processing using (optional) pods or jigs; (2) side & (4) rear pop-up pins for easy material location. - Positioning Speed: X- & Y-axis 262 FPM (80 MPM), Z-axis 98 FPM (30 MPM); "X-axis uses a helical rack & pinion system, Y- & Z-axis use precision ball screws; all axes movement is on precision linear guides & ways & controlled by digital, brushless AC Servo motors; all motion components are maintained by an automatic lubrication system. - Boring Unit: (1) 4 HP (3.3 kW) - 4,000 RPM motor: (14) independent vertical spindles, (7) in X-axis & (7) in Y-axis; (6) horizontal drills with (2 + 2) in X-axis & (1 + 1) in Y-axis. - Machining: (1) 16 HP (12 kW) Liquid-cooled vertically mounted HSD electro-spindle router with HSK F63 adaptor, inverter driven 1,000 - 20,000 RPM with max. torque from 12,000 - 20,000 RPM; (1) 6-position "Ride Along" Automatic tool changer for "on-the-fly" ATC. - Operator & Machine Control: PC Front End with: BIESSE "XP600 + WINDOWS" XP-operating system; 15" color CRT; 40 GB hard drive; full keyboard & mouse; Ethernet connection capabilities; programs can be transferred via diskette or downloaded by wire; built-in 1,500 W air conditioner for constant temperature & dust-free environment. - Complete with: 11 KVA Stabilized autotransformer for voltages between 220 - 600 V; automatic "forced" lubrication system for guides & ball screw; emergency stop rope & pressure sensitive safety mats that will instantly place machine in "pause cycle" when stepped on; sound absorbing protective head enclosure with debris curtain around bottom edge. - NO Vacuum Pump is included but let us know if needed we can source a good used unit.

--at Auction, Seller Loads, Backup machine with only 1,500 hrs.-- BIESSE ROVER 24 FTS CNC Flat Table Machining Center, with ATC & Boring (Purchased as a backup, with less than 1,500 hours, but PLC needs to be replaced. Currently de-installed & ready to ship.) Specifications: 4' x 10' "Matrix" grid phenolic surface table for "Nested Base Manufacturing". Working cap.: X-Axis is 122" (3,100 mm), Y-axis 49.2" (1,250 mm), Z-axis stroke is 9.8" (250 mm). Max. material thickness of 6.1" (155 mm). Positioning Speed: X- & Y-Axis is 328 FPM (100 MPM), Z-axis 98 FPM (30 MPM). X-Axis uses a helical rack & pinion system, "Y- & Z-axis use precision ball screws. All axes movement is on precision linear guides/ways & controlled by digital, brushless AC Servo motors. All motion components are maintained by a lubrication system. Work area: Flat table design with "Matrix" grid phenolic surface for "Nested Base Manufacturing"; (2) independent working areas. External pop-up reference pins: Reference pins are adjustable & can be placed on the front of the table, on the back of the table, on the RH side & on the LH side. Prepared for (optional) "quick fit" vacuum outlets for optional clamping of small or awkward shaped parts. Each work zone with: (1) "Quick Connect" vacuum outlet for custom vacuum fixtures. Boring Unit: (1) 2.5 HP (1.7 kW) - 4,000 RPM Motor; (14) Independent vertical spindles, (7) in X-axis & (7) in Y-axis. (6) Horizontal spindles with: (2 + 2) in X-axis & (1 + 1) in Y-axis; (1) X-axis grooving saw for max. 120 mm dia. blade. (1) 6-Position "Ride Along" Automatic tool changer for "on-the-fly" ATC. Machining: (1) 10.2 HP (7.6 kW) Electrospindle Router, variable speed from 1,000 - 20,000 RPM. Operator & Machine Control: PC Front End with: NC 1000 + WINDOWS "NT" operating system; 15" color CRT display. 40 GB Hard drive; floppy & CD drives; full keyboard & mouse; Ethernet connection capabilities. Complete with: Manuals, documents, and safety perimeter devices. NOTE: No Vacuum Pump included with this machine.