You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
345 Results Found for Sawmill Viewing 1 - 25 of 345 results
$23,500
ACROWOOD CORPORATION Model 612, 2-Deck Suspended Screen complete with the following features: -- (2) Decks. -- 5 HP Dual Drive design. -- 6 Ft. x 12 Ft. Screen size. -- Punched Plate Screen on Top Deck. -- Nice Custom Fab. added steel Support Structure. -- Capacity in Units per Hour (200 Cu. Ft. per unit): 29 -- Current owner bought the machine used and operated it only a couple of months but changed operation and has no further use for it. -- Overall Dimensions: 8 Ft. H, 11.3 Ft. W, approx. 13 Ft. L. -- Weight 4.5 Tons.
Equipment Location:NORTHEAST
$27,500
ACROWOOD 52” 5216-6 Chipper with the following major features: -- 52” Disc. -- Slant Disc configuration. -- Converted to KEY KNIFE System. -- 125 HP Drive Motor. -- Includes existing Spare Parts. -- New Primer & Paint.
Equipment Location:PACIFIC NORTHWEST
Call for Price
AER CONTROL SYSTEMS AT-12VCFD-12 Vertical Cartridge Dust Collector. -- General Info/Specs: Vertical Cartridge Filters (VCF): Vertically mounted cartridge design offers a unique baghouse in which the dust collected on the inside will fall much easier and do not land on the next lower cartridge (as is the case on horizontally mounted cartridges). Rectangular baghouse design with max. cap. of approx. 14,500 CFM at 2.2:1 Air-to-Cloth ratio, (24) filter cartridges, with 274 sq. ft. filter area per unit with a total of 6,576 sq. ft. cloth area. -- Filter Cleaning: Reverse Turbo Air pulse jet self-cleaning system controlled by automatic timer. Pulse air is stored in a manifold near top side of return air plenum. -- Comes with: Ground mounted PEERLESS A23 backward inclined Fan which develops 14,500 CFM at 10" SP belt driven by a 40 HP TEFC motor. DCS-10 PRATER 10" cast iron Rotary Air Lock Explosion vents. -- Includes: Motor starter, Steel support stand, some primary pipes (if you want it). Inlet plenum is below the cartridge filters and includes a baffle to drive the heavy dust down into the hopper. -- Actual model is AT-12VCFD-12
Equipment Location:MIDWEST, AL
Call for Price
AIR CURE 484RFW8 Filter Unit.. 40,00 CFM @ 8.1:1 Air to cloth ratio, 158" dia. round baghouse with (484) cloth filter bags of 8' length (3" x 6" oval bags provide for radial movement of bag during cleaning for longer life), 4,900 sq. ft. of filter. -- Designed for filtration media cleaning via 7.5 HP on board rotary air pump for compressed air operating at about 7.5 psi. Return air outlet and approx. 48" x 48" inlet for dust laden air. -- Rotating cleaning air manifold driven by 0.33 HP motor, (1) NEMA 9 solenoid and diaphragm valve control pulse jets of air to clean each row of bags; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed. -- Includes: 365BI Blower with 125 HP TEFC motor rated for 40,000 CFM; Explosion doors; walk-in access door on platform at top and safety ladder. -- Original cages will be removed and stored separately from the filter. Unique skirt at bottom of cyclone thus no support steel is needed and facilitates anchor bolt installation. -- A new set of bags are approx. $5,000. -- Depending on application unit air capacity can be increased to about 48,000 CFM, but to do so may need slightly larger fan/motor.
Equipment Location:SOUTHEAST, AL
Call for Price
AIRFLOW SYSTEMS DC-12 CARTRIDGE Dust Collector. Two Units are being sold together. -- Specifications: 8,000 CFM capacity approx. for both Filters Cartridge System complete with (12) cylindrical cartridges for each unit (approx. 133 sq. ft. cloth area per cartridge), for total approx. 3,192 sq.ft. of filter area for both unts; operating at 2.5:1 air-to-cloth ratio. -- Comes with: Automatic continuous Vibra-Pulse jet cleaning via compressed air, Sequencing Timer in an enclosure. Heavy Duty steel legs to position unit approximately 60"' above the ground, providing sufficient clearance for a Hopper Outlet for a sealed Drum . A separate Rotary Air Lock (RAL) can be added to each unit by elevating the legs if necessary. -- Equipped with: TWIN CITIES model 182 BCSW fan with 20 HP TEFC motor; fan rated for 7,000 CFM at 12" SP. -- Features: Proprietary auto-blocking system which protects the clean side of the air path from contaminants.
Equipment Location:MIDWEST, AL
$2,650
AIRTEK AR 500 Refrigerated Air Dryer. -- Approx. 500 SCFM at a max. of 300 PSI, 38° pressure dew point; uses "R-22" Refrigerant, exchanger, centrifugal condensate separator; powder-coated finish. -- Equipped with: Gauges for discharge pressure, refrigeration liquid temp., refrigeration suction temp., ambient temp., inlet compressed air temp., outlet compressed air pressure, differential air pressure, inlet compressed air pressure, and outlet compressed air temp. -- Complete with: 2" NPT Pipe connections, 1/4" electronic drain valve.
Equipment Location:WEST COAST
$650
AJAX 30 KVA 3-Phase Transformer30 KVA, 230/460 V, 60 Hz Primary; 240/139 V output. Copper windings.
Equipment Location:SOUTHEAST
$11,900
AKEMAT U 3 Automatic Topper Carbide Saw Grinder for carbide saws up to 28” -- Motor: 0.9kw grinding motor, new double bar slide for grinding spindle. -- Complete: With double bar slide saw carrier system, hydraulic infeed infinitely variable for one pass grinding method via DC drive over roller ball spindle. -- Programs: Twenty-four (24) built in programs including triple chip in one pass. Complete with full flood coolant with double filtering system and magnetic saw clamping. Machine has been completely stripped down and repainted. -- Includes: (9) piece centering collar set (1/2”, 5/8”, ¾”, 1”, 1-1/8”, 30mm, 1-1/4”, 1-3/8” and 1-1/2”) and 4 cams (150mm, 250mm, 350mm, 450mm) and set of tools and one diamond wheel.
Equipment Location:WEST COAST
$17,900
AKEMAT U3B Top and Face Carbide Saw Grinder; Automatic Topper/Facer grinding for carbide saws. -- NC Programable to 24 standard programs complete with NOAX industrial panel for storage. of all files. Stepper motor controlled both the Y & Z axis, with inverter driven X axis. -- Automatic indexing and hydraulic clamping. Hydraulic dia. adjustment by foot pedal. -- Allows for all varieties of knife grinding of tooth geometries of knife grinding. Saw blade dia. 150mm - 800mm, tooth kerf up to 10mm, tooth spacing 8mm-80mm, back clearence angle from 10-30 deg. and top bevel angle up to 45 deg. with 5" wheel. -- Features quick changeover time from face to top grinding application. -- Grinding motor 1.2 HP with reverse feature and external filtration.
Equipment Location:SOUTHEAST
$17,900
AKEMAT U 3 Automatic Topper Carbide Saw Grinder for carbide saws up to 28” -- Motor: 0.9kw grinding motor, new double bar slide for grinding spindle. -- Complete: With double bar slide saw carrier system, hydraulic infeed infinitely variable for one pass grinding method via DC drive over roller ball spindle. -- Programs: Twenty-four (24) built in programs including triple chip in one pass. Complete with full flood coolant with double filtering system and magnetic saw clamping. Machine has been completely stripped down and repainted. -- Includes: (9) piece centering collar set (1/2”, 5/8”, ¾”, 1”, 1-1/8”, 30mm, 1-1/4”, 1-3/8” and 1-1/2”) and 4 cams (150mm, 250mm, 350mm, 450mm) and set of tools and one diamond wheel.
Equipment Location:SOUTHEAST
$11,900
AKEMAT B Face grinder for carbide saw blades from 2-3/4" to 28"diameter. Tooth kerf up to 3/4". Tooth pitch from 5/16" to 5" with rake angle from -10ø to +30ø. -- Infinately variable grinding speed, with a cycl time of 20 teeth/min with .66 KW grinding motor. -- Wheel speed of 28m/sec. using 6" grinding wheel with 20mm bore. -- Newer style magnetic clamping and electronic control card. -- Complete with owner's manual.
Equipment Location:SOUTHEAST
$90,350
AMERICAN BALER 3029-720R AUTO-TIE HORIZONTAL BALER -- Motor 20 HP -- 7" Cylinder -- Infeed opening 27.5" x 30" -- Bale size 42" x 30" x variable -- Up to 1,400 lbs. (OCC) -- Ram face pressure 94 psi -- Platen force 115,450 lbs -- WILL BE COMPLETLY REFURBISHED PRIOR SHIPMENT -- 6 MONTHS WARRANTY ON PARTS -- LOADED ON YOUR TRUCK
Equipment Location:MIDWEST
$96,875
AMERICAN BALER 5029-HAT-975 AUTO-TIE HORIZONTAL BALER -- Motor 75 HP -- 9" Cylinder with 66" stroke -- Infeed opening 49.5" x 27.5" -- Bale size 30" x 43" x variable -- Bale weight up to 1,400 lbs (OCC) -- Shear blade -- Platen force 190,852 lbs. -- WILL BE REFURBISHED PRIOR SHIPMENT -- 6 MONTHS WARRANTY ON PARTS -- LOADED ON YOUR TRUCK
Equipment Location:MIDWEST
$79,500
AMERICAN BALER DC6343-830 AUTO-TIE WIDE MOUTH HORIZONTAL BALER -- 30 HP motor -- 8" Cylinder -- System pressure 2,500 psi -- Feed opening 63" x 43" -- Bale tying; Five wire auto-tie -- Complete with infeed conveyor -- Loaded on your truck
Equipment Location:SOUTHEAST
$28,900
AMERICAN BALER 10497 AUTO-TIE HORIZONTAL BALER -- 30 HP motor -- 8" Cylinder -- Feed opening 34" x 26" -- 15 Second cycle time -- Left hand tie -- With net set of twister banks. -- LOADED ON YOUR TRUCK.
Equipment Location:SOUTHWEST
$18,900
AMERICAN BALER 60AH36 CLOSED DOOR HORIZONTAL BALER -- 20 HP motor -- 7"Cylinder -- Feed opening 28-1/2" x 30" -- Finish bale size 30" x 36" x 60" -- Total ram thrust 69,200 lbs. -- Dimension; 13'8" long X 4'8" width X 7'5" high -- Shipping weight 7,000 lbs.
Equipment Location:SOUTH
$372,790
AMERICAN WOOD DRYER Direct-Fired Lumber Kiln - New, still at MFG' place;Now offered at 20% discount off the original cost and complete with the following main components and features: -- 20’ x 54’ in size, 39,000 Board Foot (92.03 Cu. Meters) capacity or 62,100 linear feet capacity, Package Type, Front Loading, Dry Kiln Building features: -- Gable Roof. -- R-20 Insulated ALCLAD Aluminum Panels, stainless-lined. -- Fan Deck Grating. -- Motor removal equipment. -- Drystar® Computer Control System, single head zone with (4) Rtds. -- 10 MM BTU/Hr. Natural Gas Fired Furnace. -- Kiln control and furnace Room approx. 20’ x 30’ x 11’ high on lowest side. -- (12) Steel lumber backstops. -- (7) 20 HP Air Circulation Fans. -- (7) SIEMENS Variable Frequency Fan Drives for 20 HP Fans. -- Accu Spray air atomized cold water Spray System with (7) Spray Nozzles. -- Insulated Door mounted on overhead track.The following $-figures show the distribution of funds applied to the original purchase price of nearly ...$466,000: ● Kiln with Gas Fired Furnace: ...$391,310 (The furnace itself is approx. ...$100,000.) ● Control System: ...$16,540 ● Furnace Room: ...$33,145 ● Backstops: . ... $ 5,400 ● VFD’s: ...$14,500 ● Water Spray: ...$ 5,100NOTES: ● The manufacturing of this equipment is nearly complete but halted pending the sale to allow for new Buyer to make any modifications desired. The price offered includes balance payment due upon completion unless modifications are requested by Buyer. ● The equipment is located at AMERICAN WOOD DRYER, LLC, Clackamas, Oregon. ● Installation by the manufacturer can be acquired directly from AMERICAN at Buyer’s option. ● Warranty offered by AMERICAN WOOD DRYER as part of the factory installation.
Equipment Location:PACIFIC NORTHWEST, AL
$17,960
Multi-Section, multi-level Belt Conveyor with: 5 HP Drive and complete with the following features: -- 7' Wide overall x 34' long; base is 7' x 8' long. -- Cleated Conveyor Belt is 6' wide x 34' long overall. -- Includes: 5 HP Motor, side guards; would fit into a 3' deep pit. -- Loading zone is 8' long, conveyor incline is 26' long; Conveyor rises to 12' high above floor level. -- This conveyor is made for delivering material up to another level or bin from floor height. -- 1st Section is 8' long. -- 2nd Section is 25' long; currently set on a 30° angle to deliver material 12' above the floor level (Modification might be possible). -- Actual time used approx. (1) year.
Equipment Location:MIDWEST
Call for Price
APSCO 63-3 Modular Baghouse dust collector with Rotary Air Lock. -- Overall Specs: 10,000 CFM, with 990 sq. ft. of polyester felt 10 oz. of filter media, comprised of 54 filters at 10" dia. by 84" long. Design based on 10:1 Air-to-Cloth ratio. --Main Blower/Motor: Side mounted APSCO MH30, material handling fan with belt driven 40 HP TEFC HP Main blower Mounted in a positive pressure configuration. 22" fan inlet dia. (Motor was replaced a couple of years ago). --Construction: Consists of (3) modules each with (18) filter bags each. System can be expanded with additional sections and blowers as the company grows. Specific machines can be run by dedicated blowers to save electrical cost, as the entire unit doesn't have to run. -- Complete with: Internal drag chain conveyor supplying a Rotary Air Lock with 5HP TEFC gearbox/chain drive. System disconnect included. I-beam and angle iron support structure with support platform for main fan and catwalk. (3) integral access doors/explosion doors. rectangular plenum to (18" dia.) return air into building.
Equipment Location:MTN/CENTRAL CDN, AL
$14,900
CNC circular saw Topper/Facer is designed to gring the tops and faces of triple chip, variable pitch and alternating top or face. -- An industrial-grade computor and touch scree interface give the operator complete control of all functions. Grinding parameter for up to 14 saws, 6" to 36" diameter, can be stored in memory for instant set up. -- Features: -- Pentium 233 MMX P.C. control. -- Touch screen for easy operation. -- Store memory for 20 different preset saw configurations. -- 20 different tooth patterns with up to 10 teeth in a pattern custom and specialty saws. -- Total control of stock removal. Tooth configuration, wheel lift off and grinding depth and speed. -- Totally encolsed, flood cooled (15 GPM). -- True circular feed, feed fingers travels in the same radius as the saw so it will not slide up or down the tooth as it indexes. -- No nee to adjust the faceplate for saw thickness. Simply enter the tooth thickness and the machine automatically calculates the correct offsets. -- Grinding wheel motor automatically reverses direction for right and left hand teeth. -- Specifications: -- Saw diameter: 6" to 36" (150 mm to 915 mm). -- Saw Eye diameter: 5/8' to 9 5/8". -- Maximum tooth width 0.300". -- Maximum carbide length: 9/16". -- Plate thickness: 0.035" to 0.180". -- Hook angle range: -20 to +40. -- Back angle range: 5 to 20. -- Top Bevel Angle Range: 0 to 45. -- Face Bevel Angle Range 0 to 15. -- Grinding wheel diameter: 6". -- Grinding wheel speed: 7158 SPFM @ 6" diameter. -- Motor 1 1/2 HP. -- Poly-V-Belt Drive. -- Air requirement: 80 PSI. -- Overall dimensionx: 73" X 81" X 44"
Equipment Location:ATLANTIC CDN
$8,500
ATLAS COPCO GA-55 Rotary Screw Air Compressor. -- Equipped with: 75 HP - 1,755 RPM Motor, totally self-contained, single stage rotary screw air end, 267 CFM at 125 PSI rated operating pressure, max. modulate pressure 135 PSI. -- Complete with: Inlet air filtration, oil injected lubrication, motor starting control system, air cooled after-cooler, moisture separator, and drain trap. -- Includes: "ELEKTRONIKON" Operator display panel with: Pressure gauges, control mode selection, remote & automatic start, and hour meter. -- Air-end rebuilt and control upgraded. (53,299) Loaded operating hours.
Equipment Location:MIDWEST
$8,750
ATLAS COPCO "GA-55" Air Compressor (Rotary Screw) -- 75 HP - 1,755 RPM Motor, totally self-contained, single stage rotary screw air end, 340 CFM @ 125 PSI rated operating pressure, max. modulate pressure 125 PSI. -- Standard features include: Inlet air filtration, oil injected lubrication, motor starting control system, air cooled after-cooler, moisture separator, and drain trap. -- Operator display panel with: Pressure gauges, control mode selection, remote & automatic start, and hour meter
Equipment Location:EASTERN CDN
CDN$8,795
ATLAS COPCO GA-55 Rotary Screw Air Compressor. -- Equipped with: 75 HP - 1,755 RPM Motor, totally self-contained, single stage rotary screw air end, 267 CFM at 125 PSI rated operating pressure, max. modulate pressure 135 PSI. -- Complete with: Inlet air filtration, oil injected lubrication, motor starting control system, air cooled after-cooler, moisture separator, and drain trap. -- Includes: "ELEKTRONIKON" Operator display panel with: Pressure gauges, control mode selection, remote & automatic start, and hour meter. -- (52,253) Total operating hours.
Equipment Location:EASTERN CDN
Call for Price
ATLAS COPCO GX-4FF Rotary Screw Compressor w/Tank & Dryer Specifications: 5.5 HP - 3,600 RPM Motor, totally self-contained, single stage rotary screw air end, 16.5 CFM @ 150 PSI; 53-gal. horizontal tank; 1/2" tank outlet. -- Standard features include: Inlet air filtration, oil splash lubricated, motor starting control system, air cooled after-cooler, moisture separator, and drain trap; 62 DBa. -- Operator display panel with: Pressure gauges, control mode selection, remote & automatic start, and hour meter. -- Includes: Integrated Refrigerated Air Dryer, Oil Condensate Separator; Water Separator with electronic no-loss water drain. -- Only run one year on lease.
Equipment Location:EASTERN CDN
Call for Price
AUTO-V-GROOVE LVG-48-SF MULTI-HEAD LINEAR V-GROOVER: -- Specifications:Designed for full-load production; (4) grooving heads (two on each side of the beam), digital readouts on each head for postioning, dial indicators for quick setting of groove depth. Heavy Duty frame construction, machine base equipped with anti-vibration & anti-noise leveling pads. -- Grooving Heads:(4) Spindles, 10 HP - 3,600 RPM V-grooving head, 30 mm dia., 10" max. cutterhead dia., -- Working Dimensions:50" max. width cap., unlimited length cap., material thickness 1/4" - 1-1/8"; 3/4" thick arborite plate underneath the cutting area. -- Work Area: Board is transported by precision ground steel rollers with motorized height adjustment, variable feed speed from 0 - 60 FPM, head up-and-down movement via pneumatic cylinder, and linear rail & linear bearings. -- Options Include:20' Forming/folding line, LED positioning of fence lines on folder, and (2) NORDSON hot melt glue guns with tape dispenser. -- Actual Model is AUTO-V-GROOVE LVG-48-SF
Equipment Location:SOUTHWEST