You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
140 Results Found for BioMass Viewing 1 - 25 of 140 results
$27,500
ACROWOOD 52” 5216-6 Chipper with the following major features: -- 52” Disc. -- Slant Disc configuration. -- Converted to KEY KNIFE System. -- 125 HP Drive Motor. -- Includes existing Spare Parts. -- New Primer & Paint.
Equipment Location:PACIFIC NORTHWEST
Call for Price
ADVANCED PROCESSES Disc Pelletizer complete with the following components and features: -- 14 Ft. Diameter Disc. Disc and contact surfaces are comprised of Stainless Steel. -- Base 8’5” x 9’3” x 9’8” High. Base and frame are carbon steel. -- Hydraulic Lift. -- MAIN DRIVES:Disc Gearbox: SEW-EURODRIVE INC., Type: K187DRE225M4/C, Output: 12 RPM, Torque: 308,865 Lb-in.Disc Motor: SEW-EURODRIVE INC., Type: K187DRE225M4/C, 60 HP, 460V, 1780 RPM.Scraper Gearbox: SEW-EURODRIVE INC., KA77BDRE100LC4/C, Output: 34 RPM, Torque: 9115 Lb-in.Scraper Motor: SEW-EURODRIVE INC., KA77BDRE100LC4/C, 5 HP, 460V, 1750 RPM. -- This equipment is utilized for manufacturing bead shaped pellets, usually for products like fertilizer. Material rolls on the spinning disc to agglomerate and to further harden. Material can be built-up or conditioned on this machine. Once the proper size diameter is achieved, those larger beads roll off at the top of the disc and are conveyed away. The disc speed is variable with the scraper turning in the opposite direction. The scraper keeps any build-up from forming on the disc. The disc speed and disc angle are variable to control the target pellet size.
Equipment Location:MTN/CENTRAL CDN, AL
Call for Price
Wood Drying System complete with the following major components: -- 12 Ft. x 48 Ft. AEROGLIDE Triple-Pass Rotary Drum Dryer. -- Trunnion Bases with Wheels. -- Drum Drive with Drum surround Sprocket arrangement. -- Dryer Main Fan. -- 40 MM BTU Biomass Burner with fuel Feed System, Burner Fans, Fuel Induction Fan. -- Main Cyclone material separator followed by Twin Multi-clone. -- Cyclone Airlocks. -- Professional rigging and loading is available. -- NOTE: No controls.
Equipment Location:SOUTHEAST
$48,500
AIROFLEX "HydroFlex" Model 37.5 Trailer Dumper with 38 FT x 10 FT deck. -- Hydraulic power unit. -- 50 Ton capacity, full tilt. -- Stationary Backstop, no pit required. -- Ready to load... save removal costs. -- This unit was previously tipping "hog fuel" wood trailers.
Equipment Location:PACIFIC NORTHWEST
$216,400
AIR-O-FLEX Full Truck and Trailer (also B-Train) Dumper complete with the following features: -- 100 Ft. Tilting Deck to handle full truck and trailer or B-train and tractor. -- Full tipping angle. Great for wood chips, shavings or sawdust. -- Drive-Thru Style for rapid unloading. -- Material Discharge Conveyor. -- Hydraulic Power Pack. -- Steel Approach Ramp. -- Installation Drawing. -- Partially dismantled. Professional rigging and loading is available. Shipping will require two trucks.
Equipment Location:WESTERN CDN
Call for Price
BARBER GREENE Portable Dryer System;With the following major components and features: -- 7 Ft. dia. x 35 Ft. Rotary Drum Dryer. -- Comes with new Flights. -- HAUCK Model "380" 80 MM BTU Burner operates on Used Oil or Diesel. -- External Trunnion Drive with Shaft-Mount Reducers. -- (2) Drive Motors per trunnion for a total of (4) Drive Motors (480 volt, 3 phase). -- Mounted on 3-Axle Carrier. -- BARBER GREENE 58,000 CFM Baghouse with Pulse Jet Cleaning. -- Also mounted on 3-Axle Carrier. -- Air Ducting.
Equipment Location:WESTERN CDN
Call for Price
BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg.F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump,water and steam piping Emissions Control: All required baghouses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!
Equipment Location:WEST COAST
$25,000
BLISS CounterFlow Pellet Cooler with the following features: -- Rated for 5 to 7 TPH. -- Includes Cooler, Cooler Drive, Control Panel, and Fan. -- NOTES: ● No cyclone or Airlock. ● Only one left available.
Equipment Location:MIDWEST, AL
$34,500
BM&M 2-Deck (3 separations) Suspended Deck, Chip Screen with the following features: -- 6' x 16' Deck Surface for high production output. -- Wire Mesh Screens. -- Configured for Ball-Deck Arrangement if needed. -- BM&M Base-Mounted Arrnagement. -- NOTES: 1. Photos show the BM&M Screens as removed from service. These units will be cleaned and checked to assure very good working order. However, these BM&M Screens were operating at optimal production conditions when removed.2. Frames available at additional option.3. Price shown is for (1) BM&M Screener, but (2) are available. See listing SG-010057 for the other one.
Equipment Location:PACIFIC NORTHWEST
$34,500
BM&M 2-Deck (3 separations) Suspended Deck, Chip Screen with the following features: -- 6' x 16' Deck Surface for high production output. -- Wire Mesh Screens. -- Configured for Ball-Deck Arrangement if needed. -- BM&M Base-Mounted Arrnagement. -- NOTES: 1. Photos show the BM&M Screens as removed from service. These units will be cleaned and checked to assure very good working order. However, these BM&M Screens were operating at optimal production conditions when removed.2. Frames available at additional option.3. Price shown is for (1) BM&M Screener, but (2) are available. See Listing SG-010056 for the other one.
Equipment Location:PACIFIC NORTHWEST
$32,500
BM&M 6 X 16 DOUBLE DECK SCREENER -- 2 Deck and 3 separators -- 7.5 HP motor -- Screen surface 6 ft. x 16ft -- Bolt-on top cover -- Top opening 18'6" -- SCREENS ARE SUPPLIED AT EXTRA COST
Equipment Location:MIDWEST
CDN$39,900
BM&M 3X10-2DD88 DOUBLE DECK CHIP SCREEN -- 5 HP motor -- (2) Deck screen -- 3 feet x 10 feet long screening area -- Stainless steel screens 1/4" and 1/8" -- Zero rust as it has been inside -- loaded on your truck
Equipment Location:MTN/CENTRAL CDN
$34,700
BM&M 4-Deck 4’ X 12’ Counterflow Screen with a total of 28 lineal feet of screen for high efficiency. -- Rated for 35 to 40 TPH on wood chips. -- Welded Mild Steel construction. -- Bolted Structural Steel Support Stand. -- Quick change screen access door. -- Dynamically Balanced design - Horizontal loading is <3% of maximum vertical loading. -- Main Drive Motor: 5 HP / 575-volt / 1800 RPM. -- OPTION: 32 spare Screens available for this unit at extra charge. Size Range: 5 Mesh to 2".
Equipment Location:EASTERN CDN
CDN$14,300
BUDZAR INDUSTRIES, INC. Thermal Oil Boiler with the following features: -- Electrically heated with a Full Load of 160 Amps. -- Max. working pressure: 50 PSI. -- Temperature range: 50° F to 450° F -- Designed flow rate: Zone 1, 120 GPM @ 75’ TDH. -- Previously used to heat a 14-opening plywood hot press. -- Save a bundle on this one - pay in Canadian dollars!
Equipment Location:WESTERN CDN
$16,500
CHALLENGER CH300-4055-S Horizontal Grinder; for grinding large slabs and rippings.Equipped with: -- 75 HP drive motor drives an 18" dia. rotor, 36" in length with diamond shaped cutters, inlet of 39" wide x 7-1/2" high. -- Includes: 3/4" Baffled screen. -- Rotor recently repaired, new back supports welded in and new tooling fall 2015.
Equipment Location:MID ATLANTIC
$16,500
CHANTLAND V-12 BAG FILLING LINE -- Bag filling line, previously used to fill powdered chemicals into 25 lb. - 100 lb. bags. -- Includes Chantland model V-12 gravity filler with stainless steel contacts and digital load scales. -- Includes mild steel pyramid shaped hopper to feed into filling head. -- Bags are conveyed on v-trough conveyor through filler to Fischbein band sealers for bags. -- Includes updated controls and was in working condition when removed from service. -- Previously operated at approximately 100 bags/hr of free flowing powders.
Equipment Location:WEST COAST, AL
$29,995
COMIL STAR 200B Shrink Wrap System for Case Goods. -- Product is automatically carried to unwinding unit for top & bottom wrapping application with foil/film, welding/cutting of film after product passes through foil application station. -- The loosely wrapped product is transferred to the Tunnel for film heat shrinking; the edge pressing rollers at the outfeed of the tunnel collect the excess film, while they apply the final side/edge pressure. -- Wrapping Station: PE Shrink film infeed & middle belt conveyors with inverter driven independent geared motors, (1) upper & (1) lower motor for film unwinding & welding bar movement, welding bar driven by toothed belt. -- Working Dimensions: Welding bar length is 3,300 mm (130"), upper foil roll max. width is 2,150 mm (84-1/2"), lower foil roll max. width is 1,450 mm (57"). -- Feed belt width is 1,500 mm (59"), infeed & middle conveyor is 2,400 mm (94") long, max. working height is 450 mm (18"); working table height is 800 mm (31"); variable belt conveyor speed from 3 - 15 MPM (10-49 FPM) by inverter; free-standing control panel. -- Heat Tunnel: Welded sheet metal structure, insulated cavities for minimum heat loss; (2) heating units with armored electric resistance, centrifugal fans for uniform heat distribution. -- Teflon Coated mesh conveyor belt transport heating tunnel, gear motor driven by inverter; spring loaded edge pressing unit at outfeed end of tunnel to press overhanging film. -- Shrink tunnel length is 4,700 mm (185'), mesh conveyor is 4,700 mm (185") L x 1,800 mm (70-3/4") W x tunnel 600 mm H (24") and will accept a will accept a 450 mm (18") part height, working table height is 800 mm. (31.5") -- Variable mesh belt conveyor speed from 3 - 15 MPM (10 -49 FPM) inverter; outfeed conveyor with powered driven rollers, speed control by inverter for cooling down the items after shrink wrapping. -- Equipped with: SIRIO Welding Station; actual model is "New Star 200B". -- Total power requirement of 86 Amps, 60 Hz, 50 kW on 600 Volt, 3-Phase
Equipment Location:EASTERN CDN
$29,995
COMIL STAR 200B Shrink Wrapper for Case Goods. -- Product is automatically carried to unwinding unit for top & bottom wrapping application with foil/film, welding/cutting of film after product passes through foil application station. -- The loosely wrapped product is transferred to the Tunnel for film heat shrinking; the edge pressing rollers at the outfeed of the tunnel collect the excess film, while they apply the final side/edge pressure. -- Wrapping Station: PE Shrink film infeed & middle belt conveyors with inverter driven independent geared motors, (1) upper & (1) lower motor for film unwinding & welding bar movement, welding bar driven by toothed belt. -- Working Dimensions: Welding bar length is 3,300 mm (130"), upper foil roll max. width is 2,150 mm (84-1/2"), lower foil roll max. width is 1,450 mm (57"). -- Feed belt width is 1,500 mm (59"), infeed & middle conveyor is 2,400 mm (94") long, max. working height is 450 mm (18"); working table height is 800 mm (31"); variable belt conveyor speed from 3 - 15 MPM (10-49 FPM) by inverter; free-standing control panel. -- Heat Tunnel: Welded sheet metal structure, insulated cavities for minimum heat loss; (2) heating units with armored electric resistance, centrifugal fans for uniform heat distribution. -- Teflon Coated mesh conveyor belt transport heating tunnel, gear motor driven by inverter; spring loaded edge pressing unit at outfeed end of tunnel to press overhanging film. -- Shrink tunnel length is 4,700 mm (185'), mesh conveyor is 4,700 mm (185") L x 1,800 mm (70-3/4") W x tunnel 600 mm H (24") and will accept a will accept a 450 mm (18") part height, working table height is 800 mm. (31.5") -- Variable mesh belt conveyor speed from 3 - 15 MPM (10 -49 FPM) inverter; outfeed conveyor with powered driven rollers, speed control by inverter for cooling down the items after shrink wrapping. -- Equipped with: SIRIO Welding Station; actual model is "New Star 200B". -- Total power requirement of 86 Amps, 60 Hz, 50 kW on 600 Volt, 3-Phase.
Equipment Location:EASTERN CDN
Call for Price
Cubing Plant Equipment for manufacturing animal feed built around COOPER cubing equipment complete with the following features and components: -- COOPER Model 98-500 Cuber with 250 HP Main Drive. -- SUPREME 600 Mixer Grinder with 150 HP Main Drive. -- COOPER Meter Box (serial 1038) with 15 HP main Drive, ¾ meter Drive and 1/3 HP meter Drive. -- Operator Controls -- AUTOMATED BAGGING EQUIPMENT: ● DOBOY A95A Sewing Machine complete. ● HOWE RICHARDSON SCALE SYSTEM MODEL E58. ● BEMIS 7206 BAG FORMER. ● ENGLETT BAG HANGER. ● 500 Lb. Capacity Cuber Feeder Box. ● 15 Ft. Conveyor with Drive. -- The bagging with this plant is also listed as number BB-010502 which is offered separately. -- NOTE: This plant was operating two COOPER cubers but one is being kept by the owner for other purposes. Thus, the peripheral equipment will easily handle the output of two cubers.
Equipment Location:NORTHWEST
Call for Price
CALIFORNIA PELLET MILL, Model PM7932-12, Pellet Press (pellet mill) complete with the following components and features: -- Modern Gear Driven Pellet Mill. -- Feeder with Drive. -- 450 HP, 1800 RPM Main Drive. -- 5807 ML Frame. -- Spare Parts. -- OPTIONAL ITEMS ● Die Hoist. ● Vibration Pad. -- NOTE: Two of these identical machines are available. See our listing PT-010450 for the other one.
Equipment Location:MIDWEST
Call for Price
CALIFORNIA PELLET MILL, Model PM7932-12, Pellet Press (pellet mill) complete with the following components and features: -- Modern Gear Driven Pellet Mill. -- Feeder with Drive. -- 450 HP, 1800 RPM Main Drive. -- 5807 ML Frame. -- Spare Parts. -- OPTIONAL ITEMS ● Die Hoist ● Vibration Pad. -- NOTE: Two of these identical machines are available. See our listing PT-010449 for the other one.
Equipment Location:MIDWEST
CDN$31,900
CRESSWOOD EF-60-100 Horizontal Feed Wood Grinder -- Horizontal feed, low RPM grinder.Equipped with: -- 8.5" x 60" feed opening. -- 100 HP motor powering a 16" diameter rotor with indexable cutter teeth at 300 - 400 RPM.Includes: -- New Electrical control panel, powered load sensitive feed roll with replaceable grippers. -- 12' x 60" vibrating infeed conveyor. -- Capacity from 2000 to 15,000 #/hr Depending upon screen size and type of material being ground. -- 1-1/4" screen included. -- 5/8" spare screen. -- (1) Set of new knives. Note: Transformer for 600 volts operation available.
Equipment Location:EASTERN CDN
$24,500
CRESSWOOD EF-2440 AST Horizontal Feed Wood GrinderHorizontal feed, low RPM grinder, 5" x 24" feed opening and aggressive feed roller infeed system.Equipped with: 10" Dia. x 24" wide grinding rotor head with (42) indexable cutters; 40 HP main drive motor; rotor grinds at approx. 400 -500 RPM. -- Aggressive counter weighted feed roll system can process hard woods and soft woods - green or dry, at rates of 900-4,000 Lbs/Hr; dust collection outlet with 10" OD. -- Includes: 16' Vibratory Infeed Conveyor; 1/2" screen (good for animal bedding)
Equipment Location:SOUTHEAST
$27,500
CRESSWOOD HF-36-30 Hopper-Fed Low Noise Grinder Specifications: -- 30 HP Rotor motor; 10" dia., 36" long rotor with (42) indexable knives operating at 50 - 150 RPM; 30" x 44" cutting chamber. -- Hydraulically operated pusher ram with a 36" stroke automatically advances & retracts on a continuing cycle, pushing the scrap into the low RPM grinding head. -- Pusher Ram automatically resets in case of material jams. Complete with: -- 7.5 HP Ram motor, interchangeable screen; 8" dust collector pick-up, self-contained outfeed blower.
Equipment Location:SOUTHEAST
Call for Price
CRESSWOOD EF-36-60 Horizontal feed, Low RPM Grinder36" Feed opening and pinch type aggressive feed roller infeed system feeds rippings and blocks. -- Equipped with: 36" Wide x 10" dia. grinding head; indexable cutters, rotor grinds at approx. 300 -400 RPM; 60 HP main motor. 10" diameter dust collection port. -- Feed system consists of a 45' x 36" wide vibratory conveyor with 7.5 HP motor. -- Complete with NEMA 12 control box with motor controls. -- Includes: 3/4", 1" and 1-5/8" Interchangeable screens; new replacement teeth, bolts and anvil, electro-magnet for metal separation.
Equipment Location:MID ATLANTIC