You Have Selected
58 Results Found for Cooper Machine Company, Inc. Viewing 1 - 25 of 58 results

Cooper Machine Incomac IDV Kiln

Incomac is now offering the IDV kiln. This kiln eliminates the need for boilers, furnaces, electrical coils, heat exchangers or heat pumps. Running only on electricity, this is a great option if you need more capacity and have run out of boiler capacity. Call for more information! Kiln models: IDV-20 8,500bf 15'4" x 12'2" x 12'5" IDV-40 15,000bf 21'3" x 18'1" x 12'5" IDV-50 20,000bf 25'2" x 18'1" x 12'5" IDV-60 25,000bf 27'2" x 24'0" x 12'5" IDV-80 34,000bf 35'0" x 24'0" x 12'5" 34,000bf is the largest IDV kiln model available.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Incomac ICD Kiln

The ICD LINE requires a boiler and the head source can be either hot water, overheated water, steam or diathermic oil. The heat exchangers are composed of stainless steel pipes with extruded finning made of aluminium. INCOMAC Design Office adapts the technical characteristics of the drying units to the customer’s needs. Incomac also has the ICD-PAL line where you can dry and heat treat in the same kiln. Incomac also has an ICD-HT kiln. This is a kiln that allows temperatures to get higher than the standard kiln (up to 250 degrees). This is good kiln for drying pine faster.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Incomac TAG Kiln

The TAG line is is a direct fire kiln that uses a burner with a heat source of either natural gas, GPL gas, or gas oil.The burner, located outside the kiln, is connected to stainless steel heat exchangers installed in the upper part of the kiln. The TAG line is one of the suggested options when a client does not have a boiler facility. This kiln works great with pallets and can also heat treat as well. Incomac also has the TAG-PAL line that allows you to dry and heat treat in the same kiln.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Incomac MAC Kiln

This machine is not just a dehumidifier but also a condensation machine with a heat pump that uses electricity as a source of energy. Incomac's heat pump drying system provides a considerable energy savings, while still producing optimal efficiency. Many heat pump systems reduce the humidity by the cooling process, but do not effectively use the ability to heat as well as cool. The unique design of this dehumidification kiln uses all energy to its fullest. The cold side of the system is used to extract the moisture from the air inside the kiln by condensation. The heat generated by the gas expanding from the condensing process is routed to another coil and the air from the kiln is circulated over to it to extract the heat and re-enter the kiln. Unlike most dehumidification kilns in the US, the heat pump is located outside of the chamber. This outside position helps to guarantee a long life for the machine components and also make it easy to do maintenance. The structure and panel o
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Incomac Pre-drier

Incomac also manufactures a pre-drier. The chamber is similar to the ICD dry kiln but with double doors and a corridor in the middle so you can store or take out the stacks at varying times. The pre-drier has soft drying with low temperatures and low ventilation. In the pre-drier the conditions are close to natural drying when the wind and the sun decreases the moisture of the wood, but controlled.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Incomac Continuous Kiln

Incomac also manufacturers continuous kilns. These kilns are designed for fresh softwood with a very high beginning moisture content ( 100%) with the final moisture content value usually is between 15 % and 18%. CONTINUOUS DRYER, TUNNEL TYPE, model ICD-80/CT This is a description of one continuous kiln capacity that will dry 15,800,000bf per year. The continuous kiln is composed by: 1) 1 central dryer 2) 1 loading and 1 unloading sheds Central Dryer The drying area is composed by 3 floors, one above the other. The FIRST FLOOR is the area where the wood is positioned for drying. This area is divided in 2 zones. The SECOND FLOOR is heating and ventilation area. The THIRD FLOOR is the technical room.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Incomac IDV Kiln

Incomac is now offering the IDV kiln to Cooperages. Instead of drying the staves for wine outside for months and months and months, now you can dry the staves in the IDV kiln. This kiln dries the staves just like they were outside, but quicker. Call for more information! Kiln models: IDV-20 8,500bf IDV-40 15,000bf IDV-50 20,000bf IDV-60 25,000bf IDV-80 34,000bf 34,000bf is the largest IDV kiln model available.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine MIT S.A. Vertical Band 1275

MIT has five models of their Vertical Band Resaw to cut varying widths and heights. The 1275 model uses a 6" band and has a 4'2" wheel. These resaws come with a line bar, variable hydraulic feed from zero (0) to two hundred and thirty (230) feet per minute, a live roller table with four (4) 6 ½ inch rollers, cartridge type pressure guides with the lower stationary, upper moveable, operator controlled, single or double hydraulic hauling and press roller drums, yoke and flywheel pistons of cast steel, air strain system with heavy duty air bag, using hydraulic hose for long lasting service and virtually no maintenance except for draining, electric motor activated system for raising and lowering flywheel, all systems are complete with valves, motors, cylinders, hoses, and controls, hydraulic system complete with tank, motor, pump, hoses, and valves, programmable measuring system using MUDATA microprocessor with ten position program and infinite variable parameters, and a main drive.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine MIT S.A. Horizontal Bands 700 Model

MIT makes four different models of the horizontal band. The smallest model is the 700 model. It has 28" diameter wheels and uses either a 1" or 2" band. It has one 20hp electrical motor on each head and can be used either 50 or 60htz. It also has a polychain belt drive and a 13’-0” infeed and outfeed metal tabletop chain conveyor.It uses pressure guides and can either have a manual saw set or a Mudata system can be added. Multiple heads available.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine MIT S. A. Center Split Resaw SCI-900

MIT has Two models of center split resaws to fit your needs. The SCI-900 model has 3 foot diameter fabricated solid steel wheels for 4 inch vertical band. Wheels will be flat ground unless otherwise specified. Has a high tension band with pneumatics systems. Includes a fixed pressure guide system. There are two modes where you can run it with a center split or off to one side. Manual setworks included (optional Mudata system available). Variable speed to 200 feet per minute. The principal motor is 30hp 50/60 htz and it comes complete with electrical panel.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine MIT S.A. Twin Band

MIT's Twin Band can be used in conjunction with a Cooper Overhead or it can also be used by itself for cants.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine MIT S.A. Horizontal Bands 1000

MIT has four models of the horizontal band resaw. The 1000 model works well with cants and slabs. It has heads mounted on a reinforced frame, 40” (1000mm) diameter fabricated solid steel wheels for 2 or 4” bands. It has one 60hp electrical motor on each head either 50 or 60 htz. A variable speed drive for principle motor is included along with a polychain belt drive. Also includes a 13’-0” infeed and outfeed metal tabletop chain conveyor. Available with manual head adjustment or a Mudata programmable measuring system. We also include a Lubie lubrication system for ease of lubricating.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine MIT S.A. Horizontal Bands 1275 Model

MIT has four horizontal band resaw models. The 1275 model has 4’2” (1275 mm) diameter fabricated solid steel wheels for 6” or 8" bands. Designed and fabricated with a solid center to generate maximum airflow efficiency while still allowing optimum design strength. Wheels are stress relieved and balanced to ensure smooth and vibration free operation. All bearings are first line quality. Air strain system is supplied with heavy-duty air bag using hydraulic hose for long lasting service and virtually no maintenance except for draining. Pneumatic system for flywheel movement to change blade. System allows adequate movement for extension and contraction for blade removal. Tracking and final adjustment are easily made. 75hp electrical motor on the head either 50 or 60 htz. Mudata Model Pos Div 114 for one head is included. 13’-0” (3.96m) in feed and out feed metal tabletop chain conveyor and wide motorized pressure rollers on front and back of the blades.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine MIT S.A. Horizontal Bands 1400 Model Single

MIT has four models of Horizontal Band Resaws. The largest is the 1400 model. It comes as a single head, a double head in tandem (back to back) or as an over/under band. It has 4’7” (1400mm) diameter fabricated solid steel wheels for 8” bands. Designed and fabricated with a solid center to generate maximum airflow efficiency while still allowing optimum design strength. Wheels are stress relieved and balanced to ensure smooth and vibration free operation. All bearings are first line quality. Air strain system is supplied with heavy-duty air bag using hydraulic hose for long lasting service and virtually no maintenance except for draining. Pneumatic system for flywheel movement to change blade. System allows adequate movement for extension and contraction for blade removal. Tracking and final adjustment are easily made. 100hp electrical motor on the head either 50 or 60 htz. Frame configurations have been engineered and designed from structural steel tubing and steel plate.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine MIT S. A. Center Split Resaw SCI-1400 Model

The SCI-1400 is MIT's largest center split resaw. It comes with 55" diameter fabricated solid steel wheels for either 6 or 8" bands. Variable speed hydraulics feed from 0 to 227 feet per minute. Fixed pressure guides. Electric motor for quick change of saw. High tension band with pneumatic systems. Air strain system with air bags. Includes hydraulic tank, pump, electrical motor, valves etc. With 75hp 50/60 htz electric motor and complete electrical panels. This machine can either center split or offset cut. Now includes MIT PLC and touch screen.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine MIT S.A. Vertical Band 1500 Model

MIT Vertical Resaw Model 1500 has a 59 inch diameter fabricated steel wheels for 8 or 10” bands. Designed and fabricated with a solid center to generate maximum airflow efficiency while still allowing optimum design strength. Flat ground face (unless otherwise specified). Wheels are stress relieved and balanced to insure smooth and vibration free operation. All bearings are first line; flywheel bearings are double taper-lock roller type. The air strain system has air bags for long lasting service and virtually no maintenance except for draining. Line bar comes extra-long and extra high. The resaw also has double parallel hydraulic arms and a variable speed hydraulic feed from 0 to 230fpm. It is driven by 100hp motors 50 or 60htz. It also comes with a Mudata programmable measuring system and a live roller infeed table (7” in diameter). A hydraulic tank and power system comes complete with 7.5hp electric motor for quick change of saws. It comes on a frame of reinforced steel.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Vertical Saw Arbor (VSA)

If you're looking for another option to recover your slabs then a VSA is a great option. When adding vertical edgers to your Overhead or Sharp Chain machines, put this machine in to process 3 1/2" up to 5 1/2" wide material. Options to cut up to 6" thick slabs. Lengths can vary depending on the length of your slabs. Comes with infeed with two double sharp top chains and two sets of pushover feed rollers over the #80 roller chain. The VSA can have a single or double arbor that is on linear slides for easy maintenance. Also includes outfeed with safety cage and an optional hand stacking belt option. Comes with control panel with PLC to run the system. Also comes with starters and VFDs included for the whole package. Give us a call to find the best option for your application. Feed speeds of up to 350fpm. This machine works great for anyone not wanting to deal with band saws.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Chipper

Cooper Machine is a sales representative for Precision Husky Waste Systems. We are able to provide any Precision Husky equipment to complement the Cooper Machine equipment you purchase including screens, chippers and vibrating conveyors. The canted side spout design and the position of the knife causes a smooth slicing action. The attack angle of the knife gives a gentle lift to the slab as the knife passes the center line and begins the upward swing turning the slab counterclockwise. The spout has a flat bottom and canted side to give 25 % more anvil contact, preventing slapping and wood turning in the wrong direction. Horizontal and vertical anvils give additional life, requiring less maintenance. Both anvils are hard surfaced with Colmonoy with a hardness of 62 - 65, Rockwell C scale. With a four sided replaceable anvil, maintenance and time are saved. Less horsepower is needed with Precision's smoother action. Options for 38" [96cm], 48" [122cm], 58" [147cm] and 66" [168cm]
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Board Edger

Now offering an all electric version of our popular two saw board edger (no hydraulics!) Cooper Machine manufactures a 2, 3 or 4 saw edger that is able to edge cants, boards or slabs. The most popular 6” edger comes with two movable saws to handle cants, boards or slabs from 3 inch to 18 inch wide (but custom configurations available). The operator uses the console to select the sawing size and then an optional set of laser lights follows the saw and shines on the wood to assist the operator in choosing the right sawing solution. The edger is available with an optional infeed rollcase with a set of jump chains to assist the operator in positioning the larger material onto the edger. The material can either be manually pushed onto the edger or this can be automated. On both options, multiple hold-downs pin the material to the rollers for better accuracy.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Drop Saw

Cooper Machine offers the drop saw trimmer as a better way for you to trim your boards, cants and cross-ties. This automated machine provides a precision cut and includes start/stop functions, as well as a manual override for length and adjustments. Hardwood and softwood can be set with pre-set speeds. The Drop Saw Trimmer can trim up to 24’ of boards and cants. Optional infeed rollcase with cant turner is available.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Top Arbor Two or Three Saw

The top arbor two or three saw trimmer trims three sided cants or slabs. This is a great option behind the Yield Champ to edge the cants or three sided pieces.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Movable Head

The bottom arbor trimmer is available with three to six heads. All of the heads are movable and it can trim up to a 10x10 cant, board, or three sided piece. Comes with a 30” saws and each saw has 20hp motor.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine MIT Pallet Trimmer (Multiple Models Available)

MIT is now manufacturing pallet trimmers. Models from four to six heads are available. Includes a special flat 7.5hp WEG motor per head. Mobile heads and hand brake for all heads. The head comes with two line 81X chain with dog and VDF for variable speed. Minimum distance cut saw to saw is a 600 mm (23-1/2"). Maximum height 75 mm (3"). Saw blades 450 mm (18") are not included but can be provided.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Stave Equalizer

Cooper Machine offers a Stave Equalizer Two Saw Top Arbor Trimmer. This machine feeds from the side and as soon as it gets in it even ends the board and lugs it through the trimmer. This machine manually adjusts from 30 inches up to 48 inches and trims boards from 3/4 inches up to 2 inches thick. Each arbor is mounted on 2" chrome slides and bearings with hand crank sets. The rollcase is a side feed 8', with 4' in the trimmer and 4' out for hand feeding with a 1hp drive. Four sets of board hold-downs over the lug feed. Comes with two 22" diameter saw blades, two 10hp saw arbor motors, 81x lug chain feed, 2hp electric lug chain feed, a starter panel with starters for the machine and a control panel with E-stop, motor start/stop buttons, lug start/stop eyes and a PLC for lug feed control. Frame is 6 @ 20 beam. Built heavier than standard stave equipment.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885

Cooper Machine Stick Gang Rip Saw

These small gangs can cut battons, kiln sticks and strips with ease. Heavy fabricated steel frame with guards. Includes an electrical panel and VFD feed drive. Available with different configurations, so call to find the solution that works for your application.
Cooper Machine Company, Inc.

Wadley,GA
478-252-5885