You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
165 Results Found for Carolina Machinery Sales, Inc Viewing 1 - 25 of 165 results
Call for Price
Manufacturer specs (to be confirmed): 37” x 15” work table with adjustable left and right side fences (5) Top mounted (bridge style) pneumatic hold-down clamps (adjustable spacing along bridge) (23) Horizontal boring spindles on 32MM centers Boring motor: 2HP, 208-220/440V, 3 Phase, 3450 rpm (2) Automation Devices Model 10 Vibrating feed dowel hoppers Machine is equipped with (8) dowel injectors, injectors are adjustable for spacing on workpiece up to approximately 29” centers Pneumatic stroke on dowel insertion. No longer needed at the current facility.
Equipment Location:NC
Call for Price
Single 37" Head Combination Head with Drum and Platen Belt Size: 37" x 75" his machine is no longer needed at the current facility. Seller says everything is in working condition.
Equipment Location:NC
Call for Price
3-axis CNC controlled Rip fence to 1300mm Automatic lubrication 3200mm table length 750mm table extension Eye level control panel Miter fence w/ digital display Stored indoors The owner has confirmed that this Altendorf F-45 Posit is in good runnin/working condition and is ready to load
Equipment Location:GA
Call for Price
75 HP Motor Swinging Hammers Infeed Hopper
Equipment Location:NY
Call for Price
50HP motors (unbolted as this is heavy machinery) 5' box 3 head machine Hydraulic reservoir Oil cooler (3) knives per head Each head powered by 50HP motor 119.2/59.6 Amps 1770RPM Knife grinder included: sharpens blades of shaver The production rate on this machine should be around 50 cubic yards per hour This B&C Shaving mill is in working/running condition according to the seller and is ready to load! There are hydraulic units with this. There is a cylinder on the shaver infeed box that moves the box back and forth to help clear the blades and to keep the flow going. Great operation!
Equipment Location:WI
Call for Price
Baker 4-Head Rebuild includes New: Belts, Bearings, Sprockets where needed Recrowned Band Wheels Return Conveyor This machine is ready to be loaded.
Equipment Location:NC
Call for Price
Baker Double Notcher (2) 25 HP Motors
Equipment Location:MI
Call for Price
Engine model: QSL9 Engine trype: Cummins diesel Engine HP: 325 Clutch type: twin disc Axle: 2 The seller has confirmed that this Bandit grinder is working/running condition and it is currently still in use daily. It will need a few tweeks here and there but most are cosmetic. If a little "TLC" is applied, this could work like new!
Equipment Location:CA
Call for Price
Bandit Model 2400 Disc Chipper CAT 3412 V12 Diesel Engine with Preheater 6,200 Hours Cab Loader New faceplates on chipper wheel New feed chain
Equipment Location:ME
Call for Price
20 HP Main Motor Model: YDLWFAN 7 on 7 Canisters The have plywood over the bag area This system is no longer needed at the current facility.
Equipment Location:NJ
Call for Price
Bells 4000 Series processor with Outfeed Conveyor 66 HP CAT Turbo Diesel with 1,000 hours 44" Simonds Circular Saw 5" 30-Ton Splitter Cylinder Max Log Diameter: 22" Max Log Length: 24' Production: 3- Cords/hour Cab: Heat and AC Live infeed deck Single Joystick Control Splitter Cycle Time: 3.5 Seconds 32' Outfeed Conveyor This machine is no longer needed by the seller. Everything is in good running condition and ready to go to work. System can be inspected under power.
Equipment Location:ON
Call for Price
Nesting band machine Still under power and available for inspection Comes with standalone desktop PC Touch screen monitor Laser printer w/ LabelIT software for printing labels Can be networked and sent automatically through cabainet software Flat table Working Fields: X=6450mm ; Y=1290mm ; Z=140mm Axes Stroke: X=6930 ; Y=1640mm ; Z=200mm Mobile upright moves along the longitudinal axis (X axis) by pinion and rack Brushless motors controlled by digital drives Automatic lubrication system Vacuum clamping system for pieces on table (6) back stops and (6) front stops (4) side stops Vacuum tank 12kW (16.1HP) Electrospindle with HSK-F63 adaptor Air cooled Boring head BH-21-L Revolving tool changer w/ (18) places (reduces tool change time) Seller has several thousand dollars in tooling From carbiede to diamond tooling This Biesse Rover A 3.65FT is in good working/running condition. This equipment was designed for the purpose of processing of engineered and solit woods, plastics, non ferrous metals. This is ready to load.
Equipment Location:LA
Call for Price
Stations Top and bottom trim End trim Scraping and buffing Minimum thickness: 7mm Maximum thickness: 55mm Maximum width: 10" Minimum width: 2 1/2" This Biesse Lato is in working/running condition but it will need a little TLC. The glue pot will need to be rebuilt, as well, the track to the conveyor is missing some rubber heads so that will need to be replaced. For around $3,000 worth of TLC, this will be a GREAT machine! The seller has confirmed that this Biesse Lato-23-S edgebander is in good working/running condition and is ready to load. They are selling because their work now requires an edgebander with premill capabilities.
Equipment Location:CA
$250
These are "Heat-Treated" top pressure wheels made for a Biesse Akron 246. They are designed for the area of the machine that has the heaters to shine the 3mm banding at the end of the process. The wheels were manufactured by RP Fletcher machine company. There are (20) wheels available.
Equipment Location:Monroe, NC
Call for Price
10" touch screen with numeric control switch board I Beam frame Pre mill Pro Glue Kit-VC-511 Coil guillotine knife with guillotine auto pressure adjustment Edge pressure system End trimming unit Panel thickness: from 10 to 60 mm Height of edge banding material: from 14 to 64 mm Thickness of edgebanding material in rolls: from 0.4 to 3 mm Thickness of edgebanding in strips: from 0.4 to 8 mm Panel protrusion from track: 25 mm Minimum panel length: 140mm Minimum panel width (with length 140mm): 85 mm Minimum panel width (with lenth of 250 mm): 50 mm Pneumatic connection: 7 bar Static frequency inverter: 200Hz Glue pot capacity: 2Kg Glue pot heating time at 1/2 load: 10 minutes (approximately) Weight: 4,370 lbs The seller has confirmed that this 2007 Akron 440 Edgebander is in good working/running condition and it is ready to load! This is a quick change single sided edgebanding machine with Multi Profile type tooling for the application and processing of flat edgebanding material in coils and in strip form.
Equipment Location:CA
Call for Price
Big on Dry has improved the Thermo-Modification process with their THERMOWOOD (THW) line and provides complete "turn key" systems. The PLC control systems allow programming for a wide variety off wood applications. This allows the same systems to work with very delicate wood that is hard to treat to thicker wood that will be used for outdoor products. The THW system can also be used as a conventional kiln with steam. Basic systems include: Kiln completely built with stainless steel and aluminum Initial humidy of 10-15% is reduced to 5-6% Loading options: Side or Trolley Heating options: Gas or Wood Burner Humidification: Combined Spraying System Controls: Fully Automatic Controls with PLC Interface & Software: Allows communication with Big on Dry technicians to provide online support Complete installation and training in the USA Contact CMS to get a quote for your Thermal Modification system! Carolina Machinery Sales (CMS) is proud to offer Thermo-Modification Technology from the Italian manufacturer Big on Dry.
Equipment Location:NC
Call for Price
6' x 16' Shaker screen 2" Holes on top, Fines screen underneath Arm sweeps the shavings through This Black Clawson screen is in good running/working condition according to the seller and is ready to load!
Equipment Location:NC
Call for Price
Blue Diamond Shaving Mill Double Box System: Each box is 8'6" Long Each box has two heads with 10-knives per head This system is still installed and available for inspection.
Equipment Location:TX
Call for Price
Motorized top pressure beam for panel thickness adjustment Automatic feed track lubrication system Adjustable in feed fence Quick melt granulate glue application system with twelve minute heat-up time Quick-change glue tank for easy maintenance and glue color change Double motor end trimming unit with straight and chamfer capability Flush trimming unit with two position vertical indexing and program controlled pneumatic indexing of the unit Fine trimming unit with DFC cutter head technology Contour trimming unit for profile corner trimming Scraping unit for rigid PVC edges. Program controlled indexing Buffing unit Edge band thickness 0.4 – 12 mm Panel width min. 65 mm Panel thickness 8 mm - 60 mm Contour trim feed rate 11 m/min End trim unit .35 kW 12,000 RPM Flush trimming unit .55 kW (3/4 HP) each Fine trimming unit .55 kW (3/4 HP each) Profile trimming unit 0.3 kW (1/2 HP ea.) This machine is a nice strong machine that works well but with a little TLC, it will work like new. The glue pot sensor does need to be replaced.
Equipment Location:TX
Call for Price
Top/Bottom Rough and Station Scrape Station Buffing Station Contour Station Endtrim .4mm to 3mm This used Brandt KDN-980 Optimat is a nice, heavy duty edgebander. The seller has confirmed that this is in good working/running condition and it is ready to load!
Equipment Location:NC
Call for Price
Electronic line control Automatic height adjustment with top pressure beam for all work stations Automatic magazine for strip and coil feeding Hotmelt granulate glue application system Reversible glue roller application Double motor end trim unit for precision trimming with tilt range from 0 – 15 degrees. Equipped with scraping unit with top, bottom and side tracing device for finishing thick (primarily 2mm or 3mm ) PVC edges Top and bottom buffing unit Edgeband thickness: Strips 0.4 - 3 mm (0.016" - 1/8") (max. 3 x 45 mm) Coiled material 0.4 - 3 mm (0.016" - 1/8") (max. 3 x 30 mm) (max. 0.8 x 45 mm) Edgeband length Strip material: 229 mm (9") min Panel length min. 140 mm (5 1/2") Panel width min. 60 mm (2 3/8") Panel thickness - min. 8 mm (5/16") Max. 40 mm (1 5/8") Feed speed 9 m/min (30 FPM) End trim unit - two motors 0.18 kw (.25 HP ea) End trim cutting speed 12,000 RPM Tilting range 0 – 15 degrees Flush trimming unit 0.27 kw (.33 HP ea) Cutting speed 12,000 RPM Tilting range 0 – 15 degrees This Brandt KD-56 Optimat edgebander is ready to load. The seller has confirmed that this is in good working/runnning condition
Equipment Location:FL
Call for Price
Top/Bottom Rough and Station Scrape Station Buffing Station Contour Station Endtrim .4mm to 3mm This used Brandt KDN-980 Optimat is a nice, heavy duty edgebander. The seller has confirmed that this is in good working/running condition and it is ready to load!
Equipment Location:Monroe, NC
Call for Price
2-Saw System Cut-off up to 20' long material 25 HP Motor on each saw Waste Conveyor (Needs belt)
Equipment Location:MO
Call for Price
15 HP Motor 8" Wide Capacity Shelf/Slide Return The owner purchased this machine used and now needs a wider capacity. The resaw is in good running shape and ready to load. 15 HP Motor
Equipment Location:TN
Call for Price
Brewco Wolf Resaw 4" Blade; 20'4" Long 40" Bandwheels 40 HP Main Motor 10 HP Hydraulic Feed McDonough Style Guides Some spare blades Head moves up/down, not the bed Approximate dimensions: 9'L x 10'W x 6'H Also available separately: 8' Infeed Belt 16' Outfeed Rollcase This system is no longer needed at the current facility. Ready for immediate removal
Equipment Location:GA