You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
72 Results Found for Woodworking Viewing 1 - 25 of 72 results
Call for Price
single 37" Head Combination Head with Drum and Platen Belt Size: 37" x 75" This machine is no longer needed at the current facility. Seller says everything is in working condition.
Equipment Location:NC
Call for Price
3-axis CNC controlled Rip fence to 1300mm Automatic lubrication 3200mm table length 750mm table extension Eye level control panel Miter fence w/ digital display Stored indoors The owner has confirmed that this Altendorf F-45 Posit is in good runnin/working condition and is ready to load!
Equipment Location:GA
Call for Price
Equipment Location:SC
Call for Price
Manufacturer specs (to be confirmed): Barberan KB-3-P-1400 3-Head Printing System Machine developed to print natural wood, marble or other decorative designs on top of flat surfaces. The machine has three printing heads, which allow using engraved rollers of a definite diameter. The heads are sychronized to print 3-color designs. Width: 1400 mm Headway: 90 mm Roller Diameter: 3 x 330 mm Counter pressure roll diameter: 3 x 245 mm (3) HOK 1400 mm Curing Tunnels: Each has (1) mercury UV lamp with turbine air flow cooling place behind each printing head This system is still in service, however it is no longer needed for the seller's applicaiton. System has low usage and can be demonstrated under power with short notice.
Equipment Location:NC
Call for Price
Manufacturer specs (to be confirmed): Barberan KB-3-P-1400 3-Head Printing System Machine developed to print natural wood, marble or other decorative designs on top of flat surfaces. The machine has three printing heads, which allow using engraved rollers of a definite diameter. The heads are sychronized to print 3-color designs. Width: 1400 mm Headway: 90 mm Roller Diameter: 3 x 330 mm Counter pressure roll diameter: 3 x 245 mm (3) HOK 1400 mm Curing Tunnels: Each has (1) mercury UV lamp with turbine air flow cooling place behind each printing head
Equipment Location:Monroe, NC
Call for Price
Nesting band machine Still under power and available for inspection Comes with standalone desktop PC Touch screen monitor Laser printer w/ LabelIT software for printing labels Can be networked and sent automatically through cabainet software Flat table Working Fields: X=6450mm ; Y=1290mm ; Z=140mm Axes Stroke: X=6930 ; Y=1640mm ; Z=200mm Mobile upright moves along the longitudinal axis (X axis) by pinion and rack Brushless motors controlled by digital drives Automatic lubrication system Vacuum clamping system for pieces on table (6) back stops and (6) front stops (4) side stops Vacuum tank 12kW (16.1HP) Electrospindle with HSK-F63 adaptor Air cooled Boring head BH-21-L Revolving tool changer w/ (18) places (reduces tool change time) Seller has several thousand dollars in tooling From carbide to diamond tooling This Biesse Rover A 3.65FT is in good working/running condition. This equipment was designed for the purpose of processing of engineered and solit woods, plastics, non ferrous metals. This is ready to load.
Equipment Location:LA
Call for Price
Top/Bottom Rough and Station Scrape Station Buffing Station Contour Station Endtrim .4mm to 3mm This used Brandt KDN-980 Optimat is a nice, heavy duty edgebander. The seller has confirmed that this is in good working/running condition and it is ready to load!
Equipment Location:NC
Call for Price
Specs (to be confirmed): Electric spindle 18.1 HP X-axis stroke 145.66î Y-axis stroke 82.67î Z-axis strke 13î Working area 145.66î x 68.90î Automatic tilting head Telescoping spindle extension for surface polishing (26) ISO 40 tool holders at rear Bar code reader for program interface This machine is in good working condition and can be inspected under power.
Equipment Location:CA
Call for Price
This system was used rarely on some special projects. It is still under power and available to load ASAP.
Equipment Location:OR
Call for Price
2HP Just serviced and ready to work for you Came from small shop, low hours
Equipment Location:TN
Call for Price
30 HP, low RPM Power feed Load sensing controls 15' Vibrating infeed conveyor Cresswood Model EF-12 Horizontal Grinder, ready for pick up
Equipment Location:GA
Call for Price
Cresswood 36-50 (No infeed included) 50 HP Motor Spare parts include: New anvil, misc cutters & holders
Equipment Location:NC
Call for Price
Manufacturer specs (to be confirmed): UNSTACKER OVERVIEW Infeed System - The infeed rollcases receive unbanded, unstickered, stacks of veneer via a forklift. The veneer stacks advance automatically onto the unstacker scissor lifts as needed. Load present switches indicate when loads are available to advance onto the unstacker lift rolltops. Scissor Lifts - There are two lifts with powered rolltops present in this double unstacker. The lifts will adjust up automatically to insure proper position of the top of the veneer stack. When all the veneer has been unstacked, transferred and the lift is empty, the lift will move to its collapsed position. The lift is now ready to accept another stack of veneer from the infeed system. Take-Off Belt Transfer - This section is made up of two belts with vacuum holes, vacuum plenum, flex duct, suction duct, and a suction fan. This transfer actuates up and down by a hydraulic cylinder. The correct operation of this transfer is the key to successful unstacking. When a stack of veneer is present on the scissor lift and the lift has come up to the proper unstack level, the take-off transfer will lower onto the stack of veneer. The take-off transfer will then return to the up position, taking with it one sheet of veneer. The take-off belts will then start and transfer the sheet downstream, transferring the sheet onto the staging beltway. The take-off belts will stop and the cycle is repeated. GRADING ZONE OVERVIEW Staging Beltway - The four staging belt transfer sections convey the unstacked sheets of veneer away from the take-off transfer. These transfers are also the queue area for holding and placing the sheets of veneer from bin #1 and bin #2 in the proper sequence onto the grading beltway as dictated by the recipe management program. This system helps keep the transfer/grade area into the stacker full at all times and has the ability to place sheets in the proper sequence as required by the various sorting recipes. Grade Beltway - The grading area consists of a grade beltway, Metriguard moisture meter, and reject tipple. The grade beltway transfers the sheets through an operator grade area and a PreTec grade scanner. The operator controls thereject tipple via the operator’s console or a moisture meter output. Thereject tipple rejects sheets into a reject cart. Sheets are then transferred unto the stacker infeed beltway and into the stacker plenum. STACKER OVERVIEW The variable speed stacker is designed to transport the veneer from the infeed belt to the bin assemblies at up to 50 pieces per minute (375 fpm at 60 Hz). En route to the desired bin, a number of things are being done to the sheet. Knock-off Prox - Each bin is associated with two proxes that are mounted up inside the stacker transport belts. There is one eye on each side of the machine, just inside the bin hoist. The function of these eyes is to detect the sheet once the system has determined the sheet is destined for that bin. Onc
Equipment Location:Monroe, NC
Call for Price
4 Head Completely refurbished/tested by SCM New Controller & Controller card (cost current owner $20,000) Sanding head #1 is crossbelt segmented Sanding heads # 3 & 4 also segmented w/platen finishing for extremely fine finish Was only in production for 4 years
Equipment Location:CA
Call for Price
Dustkop Model 100N40-PL 40 HP Main Motor Approx 8,000 CFM Includes plenums and Cyclone Needs new filter bags Needs new shaker motor This system has already been dismantled by a rigger and is ready to load!
Equipment Location:GA
Call for Price
15" Diameter log capacity Infeed width: 27" Infeed height: 17" Drum diameter: 51" (3) Knives 400 HP Motor 4-Top and 4-Bottom infeed rolls Approximate weight: 30,000 Lbs Approximate output: 40-60 Tons per hour Show with optional metal detector This machine was on display at IWF 2014. Please contact CMS to receive a custom quote.
Equipment Location:NC
Call for Price
Includes Merry go round Includes reform grinder Synchronized speed between slicer & merry go round
Equipment Location:ON
Call for Price
Model: Holzma HPL23/X/33/16 NOTE: Saw was upgraded from Cadmatic 2 on WFW to Cadmatic 3 on NT4. A new PC was built to run it and put in a dust free cabinet mounted on the side of the saw. The original unit is still there but not hooked up. This system has been dismantled and is ready to load on the truck. Seller stated the saw to be in good running condition and cuts stacks of melamine chip-free.
Equipment Location:TN
Call for Price
Capacity 9" x 4-3/4" 1st Head - 7.5 HP Groover 2nd Head - 7.5 HP Jointer 3rd Head - 15 HP Right 4th Head - 15 HP Left 5th Head - 15 HP Right tilting head 6th Head - 25 HP Top 7th Head - 25 HP Top 8th Head - 15 HP Bottom Outboard bearing on heads 7 and 8 Feed Speed 20 to 200 ft/min 1-13/16" spindles Carden Drive (3) Powered Infeed Rolls Random Length Hopper Feeder Iida grinder included
Equipment Location:NC
Call for Price
80" x 100" Capacity Crank Wheel for adjustment Everything works This unit is no longer needed at the current facility.
Equipment Location:NC
Call for Price
3-Moveable Blades Infeed system: Driven sequence deck, motorized servo fence, powered infeed rolls, 5-stage infeed stabilizing arms, laser blade positioning Automatic optimization from cut list
Equipment Location:NC
Call for Price
Size 19 30 HP Motor This unit was purchased used and never installed.
Equipment Location:NC
Call for Price
15,000 CFM - 1484 Square feet cloth 20,000 CFM - 2200 square feet cloth 30,000 CFM - 3600 square feet cloth Each system is complete with airlock, fan, motor, cleaning PD blower, legs and cross bracing, access ladder and platform. these units have been dismantled and are ready to load on the truck.
Equipment Location:WI
Call for Price
(4) guns included Removable recovery tanks on cart Pressure gauge Refitted with new plexiglass windows 415V Operating manual Included: 2014 6-Iwata Spray heads (purchased new for $1,500) 2014 Kremlin PMP 150 circulation pump (purchased for $2,500) Can Be Included for additional costs: 2015 Ronk Rotophase 1 phase to 3 phase converter 7.5HP The seller has confirmed that this Makor IRIDE 306 linear finishing spray Machine is in good working/running condition.
Equipment Location:FL
Call for Price
McDonough 54" Vertical Resaw 110 HP Motor 14' 4-Strand Tilt Hoist 30' Rollcase 8-Strand Transfer Chain This system has been removed from service and is ready to load.
Equipment Location:CA