Carolina Machinery Sales, Inc
Carolina Machinery Sales, Inc
 704-288-1904

Carolina Machinery Sales (CMS) works in the sawmill, pallet and woodworking industries. In addition to the buying and selling of used equipment, we work as brokers and take in machines on consignment. Give us a call today!

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 2
35 Results Found
Sort By 
Carolina-Machinery-Sales-Inc
 704-288-1904

Call for Price

Casadei  Moulder
Call for Price

Owner has changed gears and is no longer needing equipment. Great working condition and ready to be shipped.

 704-288-1904

 Call
Custom Built Infeed  Moulder
Call for Price

Each system is custom built to fit your specifications. Standard Electric Lateral Chain Feeders include Basic Feeder with transport length of 30" Workpiece width 3/4" - 9-1/4" Min. Workpiece length 12" Drive system with 4 HP total drive system Feed speed range 50 - 250 ft/min (up to 400ft/min available) Thickness 1/4" - 4" Steel flat top chain 60 Cycle per minute Adjustable Fence 35MM Feed Wheel Shafts Options 6'-16' Lateral Chain Feeder Feed Wheel Knurled, Urethane or Light Knurl Hub Options 3/4" or 2" Powder Coating Bridge Side Fence Feed Speeds up to 400 FPM Short Stock Fence 12" Wide Capacty

 704-288-1904

 Call

Call for Price

Kentwood  Moulder
Call for Price

2008 Kentwood M609X Moulder: 6-Head G300 Profile Grinder Measuring Stand Extra Heads Optional: Tooling room with approx (500) profiles

 704-288-1904

 Call
Leadermac LMC 418 Smartmac  Moulder
Call for Price

Leadermac Smartmac 4-Head Moulder

 704-288-1904

 Call
Leadermac LMC623H  with Infeed Deck  Moulder
Call for Price

Leadermac LMC-623H Moulder with Infeed Deck This system has not run in year and will need repair.

 704-288-1904

 Call
2005 Leadermac Maximac 1030 12  Moulder
Call for Price

Leadermac Moulder 12" Capacity 10-Heads: #1 10 HP, #2 25 HP, #3 25 HP, #4 25 HP, #5 25 HP, #6 30 HP, #7 30 HP, #8 30 HP, #9 30 HP, #10 15 HP 140 FPM with 15 HP feed motor ATS Heads on Top and Sides Second machine available for parts only: Spare castings, gearboxes, pendulums, control panel, spindles

 704-288-1904

 Call
Leadermac Speedmac 623  Moulder
Call for Price

- Main motor: 30 HP, 220V/440V (prewired for 220V), 3-phase, 72.9A/36.4A - Elevation motor: 1/2 HP, 1.94A/0.97A - Hydraulic pressure: 1000 PSI - Maximum cutting capacity: 10" x 16" - Distance from blade to conveyor table: 1/4"–10" - Feed speed: 0–61 FPM - Saw blade size: 180" L x 1" W - Saw blade speed: 7300 FPM - Floor to table height: 40" - Infeed table: 106" L x 16" W - Infeed belt: 215-3/4" L x 15-1/4" W - Return table: 107-1/2" L x 18-1/2" W - Return belt: 215-3/4" L x 7-1/4" W - Wheel size: 28" dia. x 7/8" W - Dust port size: 2 x 4" - Overall size: 85" W x 108" D x 83-1/2" H - Approximate shipping weight: 4325 lbs.

 704-288-1904

 Call
Leadermac Hypermac 630H  Moulder
Call for Price

Leadermac Hypermac LMC-630H Moulder 6-Head Machinewith Outboard Bearings MFG specs (to be confirmed): HEAD HP CUTTERHEAD SWING HOOD SIZE 1) 1st Bottom Head 20 HP 4.9” to 7.1” (125 – 180 mm) 5.9” (150 mm) 2) Right Side Head 20 HP 4.4” to 9.1” (112 – 232 mm) 5.9” (150 mm) 3) Left Side Head 20 HP 4.4” to 9.1” (112 – 232 mm) 5.9” (150 mm) 4) 1st Top Head 25 HP 3.9” to 8.8” (100 – 225 mm) 5.9” (150 mm) 5) 2nd Top Head 25 HP 3.9” to 8.8” (100 – 225 mm) 5.9” (150 mm) 6) 2nd Bottom Head 25 HP 3.9” to 8.8” (100 – 225 mm) 5.9” (150 mm) side heads are opposed. Directly Opposed Side Heads in lieu of staggered side heads including Air/Hydraulic Quick secure Position Locking System Easy set motorized positioning system for near side and top head Increased spindle speeds to 8000 RPM in lieu of standard 6000-RPM With 8000 rpm Spindles you will realize a 33% increase in productivity over std. 6,000 rpm Hydro-Loc Quick Change Outboard Bearings Timing belt (Poly Chain) Drives on 2 Top Heads & Last Bottom Head 2 part Sectional Pad Pressure Plates after 2nd Top Head with 2 separate pressures and fine adjustment to the outside shoe in lieu of single pressure plate Pneumatically operated Auto Feed Table Lubrication System utilizing Stand Alone Operators Control Console on HD wheels w/1.6.5 ft of Remote – Hand held Pendant Push Button Control (Jog Forward/Reverse Beam Up/Down) with 12 feet of power cord to help with setup Pneumatic Low Pressure Safety Control (if the air pressure drops below the accepted run level the moulder will shut down or will not operate)

 704-288-1904

 Call
2006 Lobo 236-H 6 Head  Moulder
Call for Price

Year: 2006 Working Width: 25mm to 230mm (1" to 9") Working Thickness: 8mm to 120mm (0.31" to 4.72") Bottom Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Top Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 7.5kW (10 HP) Side Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Configuration: Bottom, Side, Side, Top, Top, Bottom Feed Motor: 4kW (5.5 HP) Elevation Motor: 0.75kW (1 HP)

 704-288-1904

 Call

Call for Price

Lobo 6-Head  Moulder
Call for Price

Lobo 6-Head Moulder 9" Wide capacity

 704-288-1904

 Call
2007 Lobo 6-Head  Moulder
Call for Price

Lobo SM-236 C Moulder 220 3 phase power 9 1/16 wide by 3 15/16 thickness capacity 10 HP motors on heads (one is 14 3/4 hp) 6000 rpm 40mm spindles Runs on 90 psi air 6 heads

 704-288-1904

 Call
Reckmann HS 201  Moulder
Call for Price

Reckmann Moulder/Sander ready to be loaded!

 704-288-1904

 Call
2003 Renzo Borgonovo Rope   Splitter  Moulder
Call for Price

Renzo Borgonova Rope Moulder and Splitter

 704-288-1904

 Call
2007 SCMI Superset Class  6-Head  Moulder
Call for Price

SCMI 6-Head Moulder - Ready to load.

 704-288-1904

 Call
SCMI Superset Class  6-Head  Moulder
Call for Price

SCMI Superset 23 5-Head moulder •5 head machine •9” x 5” capacity •Motorized thickness adjustment for top pressure beam and top horizontal spindle •Digital displays for final width and thickness. •All spindles belt driven to deliver 6000 rpm •First bottom head: 12Hp •Right and left vertical spindles: 12HP shared •Top horizontal head: 18Hp •Last Universal: 12HP •Variable speed: 13-79 ft/min with 4.8Hp feed motor •Electrical 230v 3ph ; 154amps •1 13/16” spindle diameters •2 meter long adjustable infeed table

 704-288-1904

 Call
2006 SCMI Superset XL  Moulder
Call for Price

SCMI Superset XL Moulder 480 V/3 PH

 704-288-1904

 Call
2003 SCMI Topset XL 6-Head  Moulder
Call for Price

Working height 120 mm working width 240 mm feed speed 6-36 fpm 6’6” straightening infeed

 704-288-1904

 Call
Wadkin s - Six available  Moulder
Call for Price

Six Wadkin moulders available. Have not been run in a few years. Selling all as one package. - (4) 4-Head machines - (2) 6-Head machines

 704-288-1904

 Call
Wadkin XJ 6068  Moulder
Call for Price

Great Condition 500 RPM Spindle speed 8 Head with jointers 1-13/16" Spindle Diameter, Belt Driven 2 bottom cutter heads with jointers-15HP/15HP 2 top cutter heads with jointers--20 HP/15HP 2 right hand cutter heads with jointers--10HP/10HP 1 left hand cutter head with jointer--10HP 1 universal cutter head--10HP

 704-288-1904

 Call
Wadkin GA170 Model 2SU  Moulder
Call for Price

7 Spindle Moulder with Manual Bed Lubrication 6000 RPM Spindle Speed 19-91 F/Min Feed Speed Will Take 7" x 5" Lumber Specs: 1ST BOTTOM--7.5 HP 1ST FENCE SIDE--7.5HP 1ST LH SIDE--10HP 2ND FENCE SIDE--7.5 HP 1ST TOP-15HP 2ND BOTTOM-10HP UNIVERSAL-7.5 HP FEED DRIVE--3 HP BEAM LIFT--.5 HP

 704-288-1904

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved