You Have Selected
 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
34 Results Found for Logging Viewing 1 - 25 of 34 results
Call for Price
275B BARKO KNUCKLEBOOM PARTS MACHINE USEABLE PARTS ARE: MAIN & STICK BOOM CYLINDERS, OUTRIGGER CYLINDERS , HYDRAULIC PUMP AND VALVE BANKS , BARKO GRAPPLE JERRY 601-410-3415 GAVIN 601-394-7796
Equipment Location:State Line, MS
$2,500
USED CTR DELIMBERS STARTING @ $2,500.00 CALL JERRY 601-410-3415
Equipment Location:State Line, MS
$6,500
CTR 42 SLASHER GROUND SAW W/HOOK UP HOSES. CALL JERRY @ 601-410-3415
Equipment Location:State Line, MS
Call for Price
FRANKLIN SKIDDER PARTS MACHINE GAVIN 601-394-7796 OR JERRY 601-410-3415
Equipment Location:State Line, MS
Call for Price
843J LITTLE BURN DAMAGE, PARTING OUT. HYDRAULICS GOOD AND MOTOR GOOD. HR METER UNDER 9,000 HRS ON UNIT. ALMOST ALL VALVES GOOD ON UNIT,ALL PUMPS,ALL VALVE BANKS, CYLINDERS, ENGINE, AXLES, BOOM, RADIATOR,OIL & AIR COOLERS. CALL JERRY 601-410-3415
Equipment Location:State Line, MS
Call for Price
JOHN DEERE GRAPLES & PARTS 3 DIFFERENT SIZES ALSO HAVE AN ESCO GRAPPLE CALL FOR PRICE & AVAILABILITY JERRY 601-410-3415 GAVIN 601-394-7796
Equipment Location:State Line, MS
Call for Price
JOHN DEERE 540B AXLES & OTHER PATRS,LOG ARCH , MISC PARTS CALL JERRY 601-410-3415 GAVIN 601-394-7796
Equipment Location:State Line, MS
Call for Price
SEVERAL WINCHES FOR JOHN DEERE SKIDDERS. PRICES START AT $2500.00 to $4500.00 CALL FOR MORE INFORMATION. JERRY 60-410-3415 / GAVIN 601-394-7796
Equipment Location:State Line, MS
$1,850
8in JOHN DEERE GRAPPLE TONGS $1850.00 EACH WITH EXCHANGE CALL JERRY 601-410-3415
Equipment Location:State Line, MS
$0
AXLES FOR JOHN DEERE AND TIGERCAT EQPT. ALSO DIFFFERENTIAL CASES, PLANETARY, STUB SHAFTS CALL JERRY 601-410-3415 GAVIN 601-394-7796 "AXLES STARTING @ $1,000.00 EACH"
Equipment Location:State Line, MS
$6,500
GOOD GRAPPLE SET OFF A 848H. $6,500.00 REPIN & HOOK UP LINES READY TO GO!! JERRY 601-410-3415 ""PRICE REDUCED"""
Equipment Location:State Line, MS
$2,200
SET OF FAIRLEAD ROLLERS. EXCELLENT CONDITION.ANY WORN PARTS REPLACED.ALL UNITS READY TO WORK
Equipment Location:State Line, MS
$72,500
2010 JOHN DEERE 748H 30.5X32 TIRES $72,500.00 CONTACT JERRY 601-410-3415 OR GAVIN 601-394-7796
Equipment Location:State Line, MS
$3,500
4) 35.5 20 HOLE JOHN DEERE WHEELS DUAL PLATES $3500.00 FOR ALL 4
Equipment Location:State Line, MS
Call for Price
2008 JOHN DEERE 748H, DIRECT DRIVE, SWEDA AXLES AND 30.5X32 TIRES AND WHEELS, DUALING RING FOR PARTING OUT GAVIN 601-394-7796 CALL ONLY NO TXT
Equipment Location:State Line, MS
$9,500
1400 FRONT AXLE W/20 HOLE WHEEL PATTERN,FROM 848H SKIDDER, AXLE PRICE,$9,500.00 W/ EXCHAGE, CALL JERRY FOR MORE INFO 601-410-3415, DATA PLATES IN PICTURES.
Equipment Location:State Line, MS
$5,000
4000 JD WINCH OFF OF 848H T/C SKIDDER,NO WINCH CABLE OR CONTROL CABLE.DATA PLATE IN PIC'S. CALL JERRY @ 601-410-3415
Equipment Location:State Line, MS
$79,500
2012 JOHN DEERE 437D KNUCKLEBOOM LOADER, VERY STRONG MACHINE A MUST SEE AND LOTS OF XTRAS FOR MORE INFO CONTACT JERRY 601-410-3415 OR GAVIN 601-394-7796 NO TEXT CALLS ONLY
Equipment Location:State Line, MS
$4,000
JOHN DEERE 643D PARTS MACHINE $4000.00 GAVIN 601-394-7796
Equipment Location:State Line, MS
Call for Price
RS507 848H BURNT SKIDDER. THIS UNIT BURNED FROM THE CAB FORWARD. FROM ARTICULATION JOINT BACK TO THE GRAPPLE IS OK. SOME OF THE USABLE PARTS ARE LISTED HERE: AS IS 2)BOOM CYL.- $1500 2) ARCH CYL.- $1500 2)BLADE CYL.- $800 1)COMPLETE FRONT SWEDA AXLE- $6000 TOP BURNED 1)COMPLETE REAR SWDA AXLE- $10,000 NOT BURNED 1)WINCH- $4000 1)WINCH DRIVE LINE- $400 1)FRONT DRIVE SHAFT- $300 1)CENTER SHAFT- $550 1)REAR SHAFT- $400 1)FRONT BLADE- $2500 1)GRILLE- $1000 1)GRAPPLE UNPINNED AT BONNET- $8500
Equipment Location:State Line, MS
$4,000
JOHN DEERE 748G PARTS MACHINE NO MOTOR NO GRAPPLE TONGS $4000.00 CONTACT GAVIN 601-394-7796
Equipment Location:State Line, MS
$125,000
2013 JOHN DEERE 648H HRS 6500 NEW RECON ENGINE TORQU CONVERTER DUAL ARCH $125,000.00 CONTACT GAVIN 601-394-7796 OR JERRY 601-410-3415
Equipment Location:State Line, MS
$6,500
PRENTICE GRAPPLE LOAD WOOD, SCRAP, OR TRASH OR CHIP $6500.00 ""PRICE REDUCED"""""""
Equipment Location:State Line, MS
$250
2) 20 HOLE PRENTICE WHEELS 30.5x32 $250.00 EACH CONTACT GAVIN 601-394-7796
Equipment Location:State Line, MS
Call for Price
PRENTICE 490 SKIDDDERS 2 PARTS MACHINES. WINCH,AXLES,CYLINDER, ESCO GRAPPLE JERRY 601-410-3415 GAVIN 601-394-7796
Equipment Location:State Line, MS