Pallet Equipment For Sale

60-100 Cresswood Grinder with Hopper, Conveyor and Control Panel. New Gear Box and Bearings put in within the last year. #00849

Crosby edger 8" high opening 1 moveable blade 3 stationary blades

Crown Electric Pallet Jack

This line is for sale as one lot. 1. Vertical Reciprocating Conveyor (VRC) - 106x80x72 - Roller Dimensions: 94x3 inch diameter - 72" wide roller deck 2. Chain Transfer Conveyor - Space between rollers is 4 feet (size of Transfer deck) - Rollers on each side measure 94x3. - Roller housings on each side measure 72x96x26. -Total dimensions: 72x224x26. 3. Straight chain driven Conveyor - 72x100x26 - 8' rollers 4. 360° rotating turntable conveyor -Base dimensions: 74x58 -Roller dimensions: 40x3 - Conveyor Dimensions: 72x48x26 5. Straight belt driven conveyors (4 of them) - 54x12x12 belts not included 6. Curved belt driven Conveyor - Exterior curve: 224x48x26 - Rollers are 40" long and vary from 2-4.5" wide along curve. 7. Line conveyors (2) - 144x36x24 - Rollers available for this 8. Stacked rollers -96x66x75 - Roller dimensions: 80x3 9. Straight Gravity Rollers (18 of them) - 148x36x6.25 These rollers were stacked 4 high. Legs are available to stack them or they will work in line. 222' run consisting of 18 pieces. 10. 32' decline belt conveyor - This has damage. See last photo.

60" Pallet DIsmantler Motor 10 HP, 220/440V, 3 phase Switch on/off Band saw 228” long x 1-1/4” wide Table dimensions: 60” width x 48” depth Maximum size pallet to dismantle: 60” wide x any length Maximum distance between the horizontal bandsaw blade from table: 1” and up to 3” if the table stop end is cut. Machine dimensions: 115” length X 52” width x 55” height Weight 1,050 lb.

Single Head Pallet Notcher - New with warranty! 7.5 HP Motor 220/440 3PH Maximum Notch Size: 9" x 2-1/2" x 1-5/8 Power switch with magnetic starter Cutterhead with 4-stright HSS knives (optional 40 knife cutterhead) Dimensions: 48" L x 36" W x 40" H

Single Head 4 blade Notcher: custom built, lightly used Motor 10 HP, 220/440V, 3 phase Maximum notcher size 9” long x 2-1/2” height x 1-5/8” depth Cutterhead with 4 straight HSS knives installed

This unit has been in storage for some time and will need some TLC.

DIEHL - 990, ...Gang Rip Saw (Roll Feed)Specifications: -- 30 HP - 3,600 RPM arbor motor, ALLEN-BRADLEY "Size 4" Starter, 110 volt controls. -- 12" Arbor width with: 3-1/2" Max. thickness cap. -- 8-Roll feed: (4) Top (powered) & (4) Bottom. -- Antikickback fingers: Top & Bottom. -- (1) Saw Cartridge: 2-3/4" Saw blade bore. -- New arbor bearings.Equipped with & Features: -- 5 HP Feed: single speed. -- Rip fence. -- Outboard bearing on arbor. -- 3" Throat capacity to 1st saw blade.

Eagle 4 Stringer Pallet Nailing Machine 36'x 36" To 48"x 48". Polar Air 20HP Air Compressor w/ Matching Dryer & 2 Air Reciever Tanks.

large Eastey heat shrink tunnel Eastey ET 22-20-MBV2 heat tunnel, inside chamber size 24 wide cx 20” tall 220 volt, 3 phase, 50 amps, Year: April 2012 Model ET 2 (z?) 120-MBV2 Serial# ET242052120402, weight 1,000 lbs, Approximate measures: 26” wide x 20 ½” tall, wire belt measures 23 ½” wide, Can provide test run video under power. No charge for crating item Call for a delivered price to your location

Felins Flex Strap Power Plastic Wrapper

2021 Complete Flomat Sorting Line

FMC Pallet Stacker #C819

4INDUSTRIES 12-200 Roll Feed multiple Rip SawRoll feed multiple rip sawSpecifications: -- 12" maximum width -- 1/2" to 2" thickness -- Minimum length 16" -- Feed speed up to 200 FPM with driven bottom feed rollers, non driven top roller -- Main saw motor 40 HP -- Feed motor 7.5 HP -- Saw blade 12" diameter

Foredge 450 Deduster. Located in NC. #C910

Model: 450 LBD, SN: 23719L, 8" width capacity, electric drive, good condition

Froedge Deduster- Wire brush. #C939

480V | 15 HP

This system is ready for immediate removal.